How do you change the lock on a tailgate?
How do you change the lock on a tailgate?
Remove the retaining clip inside the tailgate that secures the lock cylinder to the tailgate. Pull the lock cylinder from the outside of the tailgate. Slide the new lock cylinder into the hole from the outside of the tailgate. Reinstall the steel clip that secures the lock cylinder to the tailgate.
Why is my tailgate lock cylinder not latching?
Tailgate lock doesn’t latch If you’re able to “lock” the cylinder yet it doesn’t latch, then there is likely an issue with the assembly. There’s a good chance you’ll need to replace it. 3. Tailgate lock cylinder won’t turn
Why does my Remote not unlock my tailgate?
If you have a power-operated tailgate locking system, then you should be able to push a button to lock/unlock it. If you push the button and nothing happens, it could be that the locking assembly isn’t working properly. Be sure the batteries in your remote are working before assuming it’s the locking assembly. 2. Tailgate lock doesn’t latch
What does a cylinder on a tailgate do?
Average rating from 130,525 customers who received a Tailgate Lock Cylinder Replacement. A tailgate lock cylinder is the actual device that accepts the proper key, and allows the cylinder to unlock the unit inside that is securing the tailgate handle.
What’s the liftgate lock on a Chrysler Town and Country?
There are 2 pneumatic cylinders that hold the rear hatch door in the open (lifted) position. Recently, the bolt that secures one end of it to the vehicle broke and the door fell and hit me on the shoulders ( it is quite heavy).
Are there any problems with Chrysler Town and Country?
Chrysler Town & Country owners have reported 12 problems related to hatchback/liftgate lock (under the latches/locks/linkage category). The most recently reported issues are listed below.
Is the rear hatch latch on a Chrysler Town and Country?
Rear hatch latch, subject of a previous safety recall is failing. When the open button is pushed, the latch opens part way and remains like that. Dealer wants hundreds of dollars to repair it. I have not authorized that repair since I believe as a previously defective and recalled part, it should be repaired at no cost to me.
Where is the plug on a Town and Country hatch?
Locate the plastic, circular plug on the hatch’s trim panel. It is right above the latch mechanism. Pry this plug out of the trim panel with a flathead screwdriver. Slide the screwdriver into the hole, and maneuver it under the bend in the linkage going to the latch.
How can I tell if my tailgate lock cylinder is broken?
A tailgate lock cylinder is the actual device that accepts the proper key, and allows the cylinder to unlock the unit inside that is securing the tailgate handle. Signs of a broken tailgate lock cylinder include the lock not turning, an object stuck inside of it, or the lock turning endlessly when the key is inserted.
Are there tailgate locks for a Chevy Silverado?
Integrated Tailgate Lock by Bully®. These tailgate locks have been designed to give your truck an O.E. look while securing the tailgate to help prevent theft. These patented tailgate locks are perfect for truck caps and tonneau covers. Tailgate Handle Relocator by Street Scene®.
How do you remove the trim from a tailgate?
Insert a flat-head screwdriver between the steel tailgate frame and the trim panel. The trim panel is retained by hidden plastic clips; slide the screwdriver around the trim panel until you hit one of the clips. Pull straight upward to disengage the clip from the frame. Continue around the trim panel until all the plastic clips are disengaged.
Can you lock your tailgate with a key fob?
The Power Tailgate Lock, from Pop & Lock, allows you to lock your tailgate using a remote key fob, much like you already likely have for your truck’s cab. This device makes it simple to lock and unlock your tailgate, securing your gear under your tonneau cover. Ready to order your own Pop & Lock Tailgate Lock?
How do you test a tailgate lock cylinder?
Step 4: Test the lock cylinder. With the lock cylinder in place and secured (and the handle installed if applicable), you can now test the cylinder’s function. Insert the key and turn. Check the handle and ensure it is locked, and then that the handle can be unlocked.
How does a hinge Mount Lock work on a tailgate?
The hinge-mount lock completely encircles the tailgate pivot, locking the tailgate to the truck and preventing tailgate removal without a key. These keyed lock install in minutes without the need for any special tools, and once in place won’t interfere at all with tailgate opening and closing.
Integrated Tailgate Lock by Bully®. These tailgate locks have been designed to give your truck an O.E. look while securing the tailgate to help prevent theft. These patented tailgate locks are perfect for truck caps and tonneau covers. Tailgate Handle Relocator by Street Scene®.
