How do you change the oil on a Chevy Cobalt?
How do you change the oil on a Chevy Cobalt?
How to Reset Oil Life: Chevrolet Cobalt 2005-2010
- 1-Turn the ignition to run (second position)
- 2-Press the INFO button to scroll until the Oil Life displays.
- 3-Press the INFO and RESET (arrow) buttons at the same time to display OIL LIFE RESET.
- 4-Press and hold the ENTER (arrow) button until the cluster shows AKNOWLEDGED.
How to reset the oil life on a Chevy Cobalt?
To reset the oil life indicator on the driver’s instrument panel, press both the information (“i” button) and display (arrow button) at the same time for one second before releasing them. The display will now show “OIl Life Reset”. Press and hold the “arrow” button until the display says “acknowledged”. The oil life will now be reset to 100%.
Where is the oil filter on a Chevy Cobalt?
Tighten it to just past hand tight or about 18-20 lb ft of torque with the 15mm socket and a torque wrench if you have one. Lower the car down from the jack stands and floor jack before moving to the engine bay. The cartridge style oil filter is located below a large black cap on the driver side of the engine closer to the front of the vehicle.
What kind of car is a Chevy Cobalt?
Owners of other similar GM vehicles such as the Chevrolet HHR, Cavalier, Prizm, Cruze, Saturn Ion, Pontiac G5, G6, and Saturn Astra may also find this DIY guide to be helpful.
What do you need for an oil change?
The items needed to complete this oil change include 5 quarts (4.7L) of SAE 5W-30 oil, an oil filter, a 15mm socket, a used oil catch container, a 1 1/4″ socket (32mm) or the Lisle # 14700 oil filter wrench, a funnel, a floor jack with jack stands or automotive ramps.
Can you change the oil in a 2010 Chevy Cobalt?
This video shows you how to change the oil and oil filter in your 2010 Chevrolet Cobalt. When you change your own oil, you know that you are putting quality oil in your Cobalt and that the filter is being changed too. Most importantly, you get a chance to look around under your Cobalt for potential trouble spots.
Where is the oil catch on a Chevy Cobalt?
Locate the silver oil pan and the 15mm oil drain bolt which faces towards the rear of the vehicle. Move the used oil catch container to below the oil drain bolt before removing it with the 15mm socket by turning it counter clockwise. Allow the old oil to drain out for at least a few minutes before re-inserting the oil drain bolt.
What kind of oil filter does a Chevy Cobalt use?
A few compatible cartridge style oil filters include the following with their respective part numbers: ACDelco PF457G , K&N PS-7000 , Purolator PL15436, GM 12605566, Fram CH9018, Wix 57082, Bosch D3324 & Mobil 1 M1C151.
How to change the oil in a VW Beetle?
Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8.
