How do I factory reset my Avaya 9641g?
How do I factory reset my Avaya 9641g?
Reset the Avaya phone to factory settings.
- Press Menu button and navigate to the “Administration …” menu.
- Select and insert the Admin password (default is – 27238)
- Scroll the menu and select Clear.
- Press Clear again to confirm the action. The phone settings are cleared and the phone will restart.
What are the buttons on the Avaya phone?
Telephone Feature Buttons Table
| Button Name | Button Label | Maximum |
|---|---|---|
| busy-ind (TAC/Ext: __) | Busy | 1 per TAC/Ext |
| call-appr | extension | Depends on station type |
| call-disp | Return Call | 1 per station |
| call-fwd (Ext: ___) | CFrwd (Ext #) Call Forward (no ext #) | 64 per extension |
How do I program my Avaya phone?
To program your IP phone:
- Press ‘*’ to program.
- Enter the code ‘27238’ and push the # key. Enter the code ‘27238’ and push the # key.
- Select ‘ADDR’ and press the Start key.
- There are many configurable IP addresses. Depending on the network setup, it depends on what information needs to be put in. 4.1.
Why is my Avaya phone not working?
You may just need to unplug and plug your phone back in. Note that your phone plugs into your network jack, and your computer plugs into the back of your phone. If that still doesn’t work, you may need to do a VLAN reset. Go to Move/Reboot/Reset an Avaya 4600 Set or Move/Reboot/Reset an Avaya 9600 Set.
What is the default password for Avaya phone?
Press the “Mute” button on the phone keypad, and enter the administrator password. The default password for Avaya 9600-series phones is “27238.” Press the “#” button immediately after you enter the password.
How do you 3 way call on Avaya phone?
Set Up A Conference Call
- From the Phone screen, select your active call.
- Press Conf.
- Dial the telephone number, or call the person from the contacts list or the History list.
- Press Join when the person answers the call.
- To add another person, press Add and repeat Steps 3 to 4.
How do I set up an IP phone?
IP Phone Setup Guide
- Plug the phone in and connect it to your network.
- Find the IP address of the phone through the phone menu system.
- Go to any computer on your network and open its web browser.
- You can configure up to 2 extension numbers by default into the phone.
- Go to the Axon web panel -> Extensions section.
