What are the curtain sizes?
What are the curtain sizes?
When measuring for curtains, keep in mind that curtains usually come in only a few different lengths: 63 inches, 84 inches, 95 inches, 108 inches, and 120 inches. Tier curtains, which are shorter and generally don’t cover an entire window, are usually either 24 inches or 36 inches long.
What is the proper length for curtains?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
What size curtains do I need for a 60 inch window?
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do curtain sizes work?
Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches). The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
Are curtains always sold in pairs?
While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.
When buying curtains is the size per curtain?
All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
What size curtains do I need for my Windows?
The traditional width for curtains on any sized window is two-and-a-half times the width of the window. If two panels are not large enough to cover this width then you should go with four.
The overlap should be at least 12″ – add this to the total width. So an 84″ wide pleated curtain is needed to cover a 72″ window. Keep in mind that fuller curtains create a richer feel on the windows while curtains with a lesser width create a more tailored look.
What sizes do window curtains come in?
Standard curtains come in specific sizes. 63 inch, 84 inch, 95 inch, 108 and 120. Once we’ve measured the width and the height of the window for a more traditional look you want to add an additional six inches above, an additional three inches below, and an additional three inches on either side.
How do you measure curtains?
Place the measuring tape at the top of the window frame or in the top inside corner and measure down to your desired length. For a higher curtain placement, measure up from the top window frame 20 inches to achieve an elongated appearance.
