How do you unlock a Sesamee lock?

How do you unlock a Sesamee lock?

How to Reset Sesamee Locks

1. Turn the dials on the base of the padlock to show the correct combination, left to right.
2. Pull the shackle upward to open the lock.
3. Swing the shackle so that it does not cover its locking hole.
4. Insert the Sesamee change pin into the small hole within the shackle hole.

How do you reset a 4 digit lock?

Take these steps to reset your lock:

1. Pull up the shackle to open the lock.
2. Rotate the shackle 90° counterclockwise and press all the way down.
3. Hold down the shackle and set your own combination by turning dials.
4. Turn the shackle back as normal. The setting is now complete.

How do you reset the code on a Sesamee lock?

How to Change the Combination on a Sesamee Padlock

1. Open the lock with your current combination. New locks are preset to “0000.”
2. Swing the shackle to the side.
3. Sesamee change pin.
4. Rotate the wheels at the base of the lock to change the digits to the new combination.
5. Remove the pin.

How do you reset a lock box code?

To do this, you simply use the reset lever and enter a new combination.

1. Open shutter door to access the combination dials and the release button.
2. Push the reset lever to the left and into the downward position.
3. Rotate the combination dials to the combination you want to use.

How do you reset the combination on a 4 digit Master Lock?

Insert the reset tool into the hole in the bracket. Rotate the recovery tool so that the main logo is facing you. Turn the wheel clockwise three times to remove the old combination. Enter your new combination.

How do you reset a Lockncharge padlock?

TO SET OR CHANGE COMBINATION: Push change pin down into open shackle hole as far as it will go –down to bend in the pin (see drawing). 3. While the pin is fully inserted, set combination to your chosen number. Pick a number you will remember and write it down as a record.

How do you change the lock on a sesamee?

1. Set Sesamee to the combination that opens the Sesamee. 2. Inside the shackle hole, there is another, smaller hole. Use the change pin sold with the Sesamee and push it all the way into the smaller hole.

How to change the number on a sesamee?

1 Set Sesamee to the combination that opens the Sesamee. 2 Inside the shackle hole, there is another, smaller hole. Use the change pin sold with the Sesamee and push it all the way into the smaller hole. 3 Leave the pin within the hole and set the combination to the new number you want. 4 Pull the pin out and you are done!

How many numbers can you put in a sesamee lock?

Instead of a spinning dial, the Sesamee uses four rotating wheels to align the tumblers that permit the lock to open. Each wheel has ten possible positions, allowing 10,000 unique combinations. The combination may be set to any four digit number and reset at any time with the aid of a short pin supplied with the lock.

When was the sesamee combination lock first invented?

The Sesamee Combination Locks have provided 80 years of reliable security Originally Patented in 1926, the Sesamee basic design has remained unchanged over the years. The four wheel design which yields 10,000 possible combination changes, uses a solid brass internal platform which has evolved over the years.