How do I make my Epson projector interactive?

How do I make my Epson projector interactive?

Press the Menu button on the remote control, select the Extended menu, and press the Enter button. Select the USB Type B setting and press the Enter button. Select one of the following: Easy Interactive Function to use PC Interactive mode.

Why is my Epson projector pen not working?

Try holding the pen at a different angle so that your hand is not blocking the signal. Make sure the pen batteries have enough power. If the light on the pen doesn’t turn green when you press the button, you need to replace the batteries. Make sure Easy Interactive Driver is installed and running on your computer.

How does an interactive projector work?

How do interactive projectors work? Interactive projectors take the standard projector and throw in some sensors to track movements and add them to the image. The interactive pen “sees” the pattern and relays the data back to the projector, where your movements are reflected back onto the surface.

How does Epson Smart Board work?

To use the pen as a mouse in PC Interactive mode, do the following:

1. To left-click, tap the board with the pen tip.
2. To double-click, tap twice.
3. To right-click, press the power/function button on the side.
4. To click and drag, tap and drag with the pen.
5. To move the cursor, hover over the board without touching it.

How do I calibrate my Epson projector pen?

How do I calibrate my projector?

1. Press the Menu button, select the Extended menu, and press Enter.
2. Select the Easy Interactive Function setting and press Enter.
3. Select Auto Calibration and press Enter.
4. Adjust the image focus, if necessary.
5. Press Enter to select Yes.

How do you set up a Epson projector?

Connect one end of an HDMI cable to the projector’s HDMI1/MHL or HDMI2 ports and the other end to an HDMI port on your computer. Connect the square end of a USB cable to the projector’s USB-B (square) port. Connect the flat end of the cable to any USB port on your computer.

How do I calibrate my Epson projector?

What is a interactive projector?

Interactive projectors take the standard projector and throw in some sensors to track movements and add them to the image. DLP interactive projectors emit a special pattern into the image that is projected. This pattern appears on the screen so quickly that the human eye can’t detect it.

How do I connect Epson projector to my computer?

Windows:Select or Start> All Programsor Programs> EPSON Projector> Easy Interactive Driver. Mac OS X:Open the Applicationsfolder, then select the Easy Interactive Drivericon. If the icon has a red X above it (), make sure the USB cable is securely connected to your computer and the interactive module.

What to do when your interactive pen does not work?

If the pens do not work, try the following solutions: Make sure nothing is blocking the signal between the pen and the interactive module on the projector. Try holding the pen at a different angle so that your hand is not blocking the signal. Make sure the pen batteries have enough power.

Why does my Epson pen go out of sync?

The calibration will be “out” if you are not set to a WXGA resolution on your computer – this usually looks like it is OK in the centre of the screen but as you move the pen out to the top and bottom of the screen it gets progressively out of sync. i. Set your resolution on your computer to a 16:10 ratio like 1280×800

Can a laptop be connected to a projector?

If the computer is connected to the projector – you will still see the screen – you just won’t be able to Interact with it. A good way to check is to draw something on the projection then compare your projection with the laptop or desktop screen – if they DON’T MATCH then you are in PC Free.