Is the fuel pump fuse on my 92 Chevy working?

I got a 92 Chevy 1500 2wd 5.7L and the fuelpump doesn’t work. It’s been sitting for about 5 years on a full tank of gas. Took a test light and found the fuel pump fuse has no power to it. Took my test … read more

Why is the fuel pump and relay not working?

The ignition circuit, which includes the ignition switch, controls power to many components, including the fuel pump and relay. If there is an issue with the switch or the circuit, perhaps a wiring problem, then power to the fuel system may be cut off.

Is there power at Orange Wire of fuel pump relay?

1990 chevy: Power at orange wire of fuel pump relay but pump wont run… ASE Certified Master Auto… 1989 5.7 chevy suburban. I have no power in the fuse panel 1989 5.7 chevy suburban. I have no power in the fuse panel for ecm 2 (fuel) or taillights/ctsy.

What kind of fuel pump did a 1990 Chevy have?

1990 chevy k1500 truck (5.0). Power at orange wire of fuel pump relay but pump won’t run. No power to any of the other 1990 chevy: Power at orange wire of fuel pump relay but pump wont run… Got no power to the fuel pump relay. Consistent. 1990 Chevy I replaced the relay. Not getting fuel I have 8 volts at the fuel pump plug … read more

Where do you find the fuel pump relay?

When you shut off the ignition, it powers down the fuel pump. In most vehicles, the fuel pump relay can often be found in the fuse box in the engine bay, which is usually a long black box which contains fuel pump relay along with various other fuses and relays.

Where is the fuel pump fuse box located?

The engine’s or the dashboard fuse box is usually a long black box containing a fuel pump relay and various other fuses and relays. For different vehicles, the fuel pump relays can be located in different places.

Why is my fuel pump relay not working?

Most of the time, if I leave the key in the On position, after several seconds to a few minutes, it will all of the sudden prime and the gauge comes alive. Then it will work for a few days until the next time it randomly doesn’t. I have ruled out the Passkey issue. The fuel pump relay works as it should. I always have power to Pin 30.

Is there an ECM signal to the fuel pump relay?

The fuel pump relay works as it should. I always have power to Pin 30. I believe the ECM tells the relay to work via the green/black wire to Pin 85. This should happen for 2 seconds when the key is turned on. I have tested this when the issue is occurring and have confirmed that no signal is being sent from the ECM.

Can a bad fuel pump cause a car to not start?

Troubleshooting The Fuel Pump (GM 4.3L, 5.0L, 5.7L). A bad fuel pump will make your 4.3L, 5.0L, or 5.7L throttle body fuel injected pickup or SUV crank but not start. Here are some more specific symptoms: The ignition system is creating and delivering spark to the spark plugs.

Where is the fuel pump on a GM Truck?

As you’re already aware, the throttle body fuel injection system on your 1987 to 1995 4.3L, 5.0L, or 5.7L pickup (or SUV) uses a low pressure (12 PSI) electric fuel pump located in the gas tank. And although GM did not include a Schrader valve to which you could connect a fuel pressure gauge, it can be tested with one to find out if the fuel …

Why does my fuel pump not prime with the key on?

Fuel pump doesn’t prime with key on. I’ve been trying to figure this out for a couple days now. My 01 Tiburon wouldn’t start the other day. It would crank, but wouldn’t fire. When I turn the key to the “on” position, the fuel pump doesn’t kick on.

Is the fuel pump fuse on my 92 Chevy working?