Where do I find the trouble code on my S10?

GM’s on-board diagnostic system on all pre-1996 S10/S15 vehicles have the capability of displaying trouble codes by jumpering two terminals of the diagnostic link connector (DLC).

What does code 12 on S10 look like?

Code 12 would look like this: ‘Flash’, pause, ‘flash’, ‘flash’, long pause. Code 12 will is repeated another 2 times (all codes are flashed 3 times before the next one).

What’s the diagnostic code for a s 10 engine?

F for at least 4 seconds after the engine had been running for 2 seconds. 16 – System voltage high – Charging system voltage was either below 9 volts or above 17 volts for 10 seconds.

Where can I Find my GM trouble code?

If you own a 1982 to 1995 GM car or truck, you just might be able to read your trouble codes for free! If you have a connector like this under your dash, read on… (note: this connector may have a black plastic cover over it, so also look for a cover shaped like this, sorry for the messy wires here)

GM’s on-board diagnostic system on all pre-1996 S10/S15 vehicles have the capability of displaying trouble codes by jumpering two terminals of the diagnostic link connector (DLC).

F for at least 4 seconds after the engine had been running for 2 seconds. 16 – System voltage high – Charging system voltage was either below 9 volts or above 17 volts for 10 seconds.

Code 12 would look like this: ‘Flash’, pause, ‘flash’, ‘flash’, long pause. Code 12 will is repeated another 2 times (all codes are flashed 3 times before the next one).

Where is the computerized scan tool on a GM car?

Plug the connection cable that comes with the computerized scan tool into the bottom of the unit. Locate the DLC connector found under the dashboard and just above the pedals. Plug the computerized scan tool into it and power on the scan tool. Navigate to the “ABS” menu on the computerized scan tool by pushing the down arrow button.

How can I reset the GM ABS brake module?

Navigate to the “ABS” menu on the computerized scan tool by pushing the down arrow button. Select “Clear all codes.” Power off the computerized scan tool and disconnect it from the DLC connector. Turn on the vehicle and verify that the ABS module is no longer lit. A computerized scan tool can be purchased online, or at any automotive supply store.

What does the ABS light mean on a Chevy S10?

Your Chevy S10’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the S10 does not have Anti-Lock brakes, and the safety they provide. Your S10’s ABS system uses a system of sensors to determine wheel speed when braking.

What is the part number on a 2001 Chevy S10?

Who is the owner of the Chevrolet S10?

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem and the name S10 are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

What is the warranty on a 2001 Chevy S10?

Every 2001 S10 under warranty is backed with the following services: 1-800-CHEV-USA (For vehicles purchased in Canada, callcall1-800-268-6800) that provides in an emergency: Freelockout assistance Freedead-battery assistance Freeout-of-fuel assistance Freeflat-tire change

Where do I find the trouble code on my S10?