What height should a washing machine drain be?
What height should a washing machine drain be?
30″
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
What height is a washing machine drain and hook up set at?
between 30 and 55 inches
Washer drain hookups should be between 30 and 55 inches from the bottom of the washer. The same measurements apply if the washer drains into a laundry tub. While the faucet heights may vary, the water supply is generally installed directly behind the washer.
Does washer drain need P-trap?
When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
Why does washing machine drain height?
1 Answer. The water in the wash tub will drain out if the drain in the wall is lower than the water level in the washing machine. Simple physics, water seeks its own level. The drain located at the recommended height will allow the water to remain and allow the pump to remove the water at the end of the cycle.
Can a washing machine drain into 1 1 2 pipe?
Drain and Trap Requirements A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers. As with all plumbing fixtures and appliances, a washing machine drain pipe must also contain a P-trap.
What is code for washing machine drain?
2 inches
According to the Universal Plumbing Code, the standard for washing machine drain size is 2 inches. The P-trap should be between 6 and 18 inches high from the floor, while the pipe should be between 18 and 30 inches high from the floor.
Does a washer drain need to be elevated?
Yes, the drain hose needs to be elevated and it’s always best to do so at a level that’s higher than the washing machine itself. This will prevent possible siphoning. There are also other steps you can take to ensure that you get the best drainage.
How do you slow down a washing machine drain?
A solution to your problem is to put a restriction in your washing machine discharge hose to slow down its flow to what your drain can handle. Just don’t slow it down to the point that your washing machine timer times out and goes on to the next step in the cycle!
Can a washer drain into a sink?
In a common setup described at Sink Engineering, the drain hose from the washing machine is hung on the edge of the laundry sink. Water is drained from the washing machine directly into the sink. Connect the washing machine to the sink drain if the drain pipe is a 2-inch line.
What size drain do you need for a washing machine?
A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers.
What is the maximum length for a washing machine drain hose?
The drain hose does have a limit. The recommended maximum length for the drain hose is 12 feet. If your drain line needs to be 18 feet there may be a problem.
What is the size of a washer drain?
The standard for new washing machine drain sizes, according to the Universal Plumbing Code, is now 2 inches. The pipe should be between 18 and 30 inches high from the floor, while the P-trap should be between 6 and 18 inches from the floor. These standpipes connect into the home sewage system.
What is the standard height for clothes washer drain?
Washers Drain Height . The washer drain hose is 1ΒΌ” O.D. (outside diameter). To be confident that no siphoning of water will take place, the drain plumbing should be a minimum of 30″ high. In order for the drain hose to function properly, the drain must be at least 30″ from the floor and less than 8 feet high.