What are common reasons my Chevrolet TrailBlazer key wont turn?

What are common reasons my Chevrolet Trailblazer key won’t turn? While there are a variety of reasons your Chevrolet Trailblazer key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

What to do if your ignition key won’t turn?

This feature is not available right now. Please try again later. Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Loading…

Why does my Gm key not turn in?

The GM (Buick, Cadillac, Chevy, GMC, Hummer, Oldsmobile, Pontiac) ignitions tend to fail because of wear from inserting the key at a slight angle. This is the same for the Chrysler vehicles (Chrysler, Dodge, Eagle, Jeep, Plymouth).

What causes a locked steering wheel to not turn in?

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

What happens when the ignition lock cylinder fails?

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

What happens when the ignition switch fails in a car?

When the electrical portion of the ignition switch fails, the vehicle will permanently or intermittently lose power to certain systems and components, depending on which positio… Read More

Is the Chevy Trailblazer a good car to buy?

The TrailBlazer accelerates enthusiastically and offers a compliant, if slightly jiggly, ride. Its handling, however, is ungainly, with excessive body lean and slow steering. Stability control might help tame the twitchy rear end, but it’s not offered. Braking is unimpressive.

What kind of engine does a Chevrolet TrailBlazer have?

A 4.2-liter, 270-hp inline six-cylinder is the only available engine. The TrailBlazer accelerates enthusiastically and offers a compliant, if slightly jiggly, ride. Its handling, however, is ungainly, with excessive body lean and slow steering. Stability control might help tame the twitchy rear end, but it’s not offered.

What causes a car key to not turn over?

This can trap a piece of the key inside the cylinder, causing more damage. Also known as a key cylinder, the ignition lock cylinder is another area that could be causing issues with a key turning over. Below are the two most common problems associated with the ignition lock cylinder and the key not turning.

What does it mean when the key won’t come out?

What I mean is you can change the gears without pushing the button on the side of the gear shifter so I didn’t know if this may be the problem since the key won’t cut off or come out if the car is not in park. My car has 999999 miles. My car has an automatic transmission. It is either the ignition switch electrical or the ignition lock cylinder.

Why does my car key not turn in?

A very common reason a car key won’t turn in the ignition is that the keyway of the ignition cylinder is a little jammed up. Just lubricating the lock may be enough to solve your issue.

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

What happens if you put the wrong key in the cylinder?

Factor 3: Incorrect key. Sometimes it’s a simple mistake, and the wrong key is inserted into the cylinder. This happens most often when someone has more than one car key on their key ring. Many keys look similar, especially if they are from the same make. So double check the correct key is being used to try to start the vehicle.

Can a car key get stuck in the ignition?

A key getting stuck in your Trailblazer’s ignition is not the most common problem. You can go the whole life of the vehicle and this typically won’t happen. Here are some of the most common reasons why the key would get stuck in the ignition. They are presented somewhat in the order of most likely to least likely to be the cause.

Why does my TrailBlazer LT have no start?

Both RPM and Speedometer gauges were jumping erratically about mid point of gauges with the key in the run position. Pushing the key to start did nothing but start the erratic gauge reading cycle over.

Why is the grounding cable on my trailblazer not working?

The Grounding Cable is one of the few things the engineers cannot dispense with from being made of Pure Copper Wire… subject to flex work hardening and, as the cable (s) bounce and move out of sync with the dynamic vibrations and motions of the Engine riding on top of the motor mounts.

What happens when your key won’t turn in?

If your key won’t turn your ignition lock cylinder and the steps above did not get your ignition to turn, then there is an extremely good chance your vehicle is in the list below. The list below is just a partial list of vehicles we suspect of having ignition failure problems when people call and say “My key won’t turn in my ignition”.

Why does my car not turn over at start?

GuruSS, so far it is not the negative cable. I am working my way through all the chasis grounds to see. And goes through a no start. Then all the doors are dead no power windows no power locks.