How to remove a shifter from a corvette?
How to remove a shifter from a corvette?
Step 5 – Remove the shifter. 1 Step 1 – Remove shift knob. Use a flathead screwdriver to pry up the plastic shift pattern on the tip of the shift knob. Use the screwdriver and 2 Step 2 – Remove the center console. 3 Step 3 – Expose the shifter and shifter boot. 4 Step 4 – Lift the boot off. 5 Step 5 – Remove the shifter.
How do you remove a rubber shift boot?
Figure 3. Use 10mm socket to remove pair of 10mm nuts. Use your socket wrench to remove the four 10mm bolts on the rubber shift boot, and lift the boot off.
What’s the best way to remove a stock shifter?
Use 3/8″ socket wrench to remove four additional bolts. Grip stock shifter and pull up. Once you remove it, you may need to use a razor blade to remove any old gasket material from the linkage-mounting base. Don’t scrape too hard, as you can scratch and damage the base. Figure 5. Remove 4 10mm bolts at the base of the shifter. Figure 6.
What’s the best way to remove a shift knob?
Looking down onto-shift lever rod, use snap-ring pliers to remove “C” snap ring. Keep one hand free to grasp the snap ring immediately upon removal as this spring-steel snap ring is prone to taking flight! Remove shift knob by pulling upward on knob.
What kind of shift knob does southern car parts use?
The Hurst Classic Shift Knob from Southern Car Parts comes in classic black or white. Screws right onto your factory shifter and uses the exact same thread patterns as the OEM knob so installation is a breeze. Effortless install on any C5 Corvette including the Z06. Complete with 6-speed shift pattern. Please choose color above.
Use 3/8″ socket wrench to remove four additional bolts. Grip stock shifter and pull up. Once you remove it, you may need to use a razor blade to remove any old gasket material from the linkage-mounting base. Don’t scrape too hard, as you can scratch and damage the base. Figure 5. Remove 4 10mm bolts at the base of the shifter. Figure 6.
The Hurst Classic Shift Knob from Southern Car Parts comes in classic black or white. Screws right onto your factory shifter and uses the exact same thread patterns as the OEM knob so installation is a breeze. Effortless install on any C5 Corvette including the Z06. Complete with 6-speed shift pattern. Please choose color above.
