Easy lifehacks

How do you put transmission fluid in a 4L60e?

How do you put transmission fluid in a 4L60e?

Get everything bolted in and then dump 4 quarts down the dipstick tube. After that initial 4 quarts, start the engine for 3 seconds and then shut it off. Then dump another 4 quarts in it and start the engine again. You can leave the engine running and add fluid until you get the correct reading on the dipstick.

When do you add transmission fluid to a Chevy Silverado?

Chevrolet has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner’s manual (typically in the back of the manual in a section titled Fluid Capacities.)

What is the transmission fluid capacity on 2004 Chevy?

I have a 2004 Chevy Suburban Z71 1500. Yesterday I took it to a mechanic and had the transmission oil and filter changed. I … read more Vocational, Technical or Tra… I have a 2006 Chevy 2500hd 4×4 and had to replace the transmission cooling lines due to a pinhole leak. I could not get to the line connections on the … read more

What kind of fluid does a Chevy truck use?

Information about type and capacity fluid are for reference only. Reference book «Fluid type : automatic transmission Chevy Trucks and Vans». Full capacity l. Service fill l.

What kind of transmission does a 2005 Chevy Silverado have?

I have a 2005 Chevy 1/2 ton, 4 door,XXXXX silverado pickup truck with a 5.3 Liter engine and an automatic transmission. There is … read more Vocational, Technical or Tra…

Where is the transmission fluid on a Chevy Silverado?

Pop the hood on your Chevy Silverado. Hood release is right here in the middle under the steering column. Then as you’re looking at the truck, just go slightly to the left here. There’s a little tab that sticks up, just move it to the center of the truck and lift up. Whenever we check the transmission fluid, you want to have the vehicle running.

How many quarts of transmission fluid does a Chevy take?

Most passenger vehicles take from 12 to 16 quarts of transmission fluid, but the model of the vehicle dictates the type and how much. While many vehicles come with a dipstick to check the transmission fluid, there are other models that do not. Similarly, how many quarts of transmission fluid does a 2000 Chevy Silverado take?

How to change transmission fluid in a Chevy Tahoe?

Return the dipstick and lock it to the tube. Before you proceed to change the transmission fluid of your 2004 Tahoe, you need to warm up your car first to get it ready. Then put a drain pan below the transmission to drain the old fluid and then remove the bolts and the pan and lower it to the ground.

How much fluid does a 2004 Chevy Silverado have?

The fluid capacity for 2004 Silverado is 2004 7.3 L and 12.8L. Park the vehicle on a leveled surface and put it in the brake. Then, open the hood and let the transmission cool for 30 minutes.

Author Image
Ruth Doyle
Common questions

How do you put transmission fluid in a 4l60e?

How do you put transmission fluid in a 4l60e?

Get everything bolted in and then dump 4 quarts down the dipstick tube. After that initial 4 quarts, start the engine for 3 seconds and then shut it off. Then dump another 4 quarts in it and start the engine again. You can leave the engine running and add fluid until you get the correct reading on the dipstick.

How do you check transmission fluid on a 4l60?

Check the fluid color. If necessary, use a small screwdriver as a dipstick. Check the fluid level. The fluid level should be even with the bottom of the threaded plug hole.

When to add transmission fluid to a car?

Check on the ground where your car is normally parked. If you find that you have more than a few small drops, you may need transmission repair in a hurry. If your fluid is low, you can add transmission fluid to your car in order to protect it from damage while you drive it to the auto mechanic.

What kind of transmission does a GMC Geo have?

Chevrolet/GMC/Geo Model Years Transmission Type Engine Type/Size Transmission Model Astro 1989-1992 TH700-R4/4L60 ASTRO/SAFARI 1995-2003 4 SP RWD/AWD V6 4.3L 4L60E AVALANCHE 2/3/2004 4 SP RWD/4X4 V8 5.3L 4L60E AVALANCHE 2/3/2004 4 SP RWD/4X4 V8 8.1L 4L80E

What kind of transmission does a Cl 96-97 have?

Transmission Model Remarks 2.2 CL 96-97 4 SP FWD L4 2.2L A6VA 3 SHAFT 2.3 CL 98-99 4 SP FWD L4 2.3L B6VA 3 SHAFT 3.0 CL 96-99 4 SP FWD V6 3.0L M7ZA 3 SHAFT

How can I tell if my GM 4L60E transmission is the same?

The easiest way to tell where the 4L60E in question came from is to look at the sticker that GM puts on top of the transmission. That’ll tell you all about what year it was manufactured and what vehicle it came in. For more on that you can always check out the 4L60E identification page on this site.

How to check and add fluid to your automatic transmission?

Wipe the dipstick on a clean rag or paper towel, reinsert it and pull it out again to check the transmission fluid level. The fluid level should be between two marks labeled either “Full” and “Add” or “Hot” and “Cold.”

What to do if your GMC transmission is not working?

Not all GMC vehicles have a transmission dipstick. If the dipstick is not present, the vehicle will need to be raised on a lift, and the level can be checked via the fill hole. The next step is to read fault codes from the transmission control module or what is known as the TCU.

Where can I find GM Mobil 1 transmission fluid?

The new Mobil 1 Synthetic LV ATF HP transmission fluid is available in quart bottles (GM Part Number 19417577) and, for a limited time, in 55-gallon drums (GM Part Number 19417904) (Fig. 12) in most locations. Drum production ended in January 2019. The GM part numbers are not on the product.

What causes a GMC transmission to overheat?

Overheating – Overheating of transmission fluid is another common problem that can lead to harsh shifting issues and premature failure of a GMC transmsion. Overheating is a concern on GMC trucks that are used for towing or hauling heavy loads frequently.

Author Image
Ruth Doyle