Easy lifehacks

How do you remove the dash from a S10?

How do you remove the dash from a S10?

Remove the two retaining screws for the instrument cluster bezel, which are accessible from the underside above the cluster. Pull the trim bezel off the panel, unplug any electrical connectors behind it, then pull the bezel back sharply to remove its clips from the panel.

Where is the heater on a Samsung S10s?

The heater core in S10s is behind the main dashboard, and it must be removed to access the core. The front dash panel can be removed by unbolting several screws at the bottom of the panel, then pulling the panel away from the dash.

How to change the heater core in a Chevrolet S10?

Tighten the drain plug on the radiator, then fill it. Crank the truck up with the heater system on its maximum setting and continue to pour coolant into the radiator until it will not take in any more. Use distilled water instead of tap water for added coolant stability. Do not allow coolant/antifreeze to drip openly, as animals may drink it.

How do you remove a heater core from a car?

Step 4 – Using the hose clamp removal tool, loosen and remove the heater hoses from the heater core inlet and outlet fittings. Step 5 – After the heater hoses have been removed, locate and remove upper dash mounting screws.

Remove the two retaining screws for the instrument cluster bezel, which are accessible from the underside above the cluster. Pull the trim bezel off the panel, unplug any electrical connectors behind it, then pull the bezel back sharply to remove its clips from the panel.

How do you remove parking brake from S10?

Remove the knee bolster’s remaining screws and lower it from the instrument panel. Disconnect the release cable for the parking brake and and unplug any other connectors before removing the bolster. Remove the two retaining screws for the instrument cluster bezel, which are accessible from the underside above the cluster.

Where are the sound insulator panels on a S10?

Connect the sound insulator panels to the instrument panel’s lower end and screw them into place. Chris Moore has been contributing to eHow since 2007 and is a member of the DFW Writers’ Workshop.

Are there any Chevy S10 Dash left in stock?

Only 11 left in stock – order soon. . Only 2 left in stock – order soon. . Only 10 left in stock – order soon. . . . Only 4 left in stock – order soon.

Remove the knee bolster’s remaining screws and lower it from the instrument panel. Disconnect the release cable for the parking brake and and unplug any other connectors before removing the bolster. Remove the two retaining screws for the instrument cluster bezel, which are accessible from the underside above the cluster.

Connect the sound insulator panels to the instrument panel’s lower end and screw them into place. Chris Moore has been contributing to eHow since 2007 and is a member of the DFW Writers’ Workshop.

Why are the lights not working on my Chevy S10?

This 1995 Chevrolet S10 came in with the complaint that the dash illumination lights do not work. The customer drives a good bit at night and does not want to take a chance on getting a speeding ticket. A quick checked showed that the tail and license plate lights came on, so I knew that the park/tail light part of the circuit was okay.

Author Image
Ruth Doyle