Can I wire into a fused spur?
Can I wire into a fused spur?
An Electric Fire Must Be Connected To A Fused Spur. An electric fireplace is one of those appliances that have a power rating that does not permit you to plug it into an ordinary wall socket. For this reason, a fused spur is the safest recommendation to wire the fire.
Does a spur need to be fused?
“The regulations state that the appliance needs to be fused, either with a plug or a fused spur. So as long as the plug sockets are accessible without touching the appliance to turn it off then this is fine, but also a fused spur is fine too.”
How many fused spurs are allowed?
A spur can be connected to an existing socket, on either a ring main or a radial circuit, providing that socket does not already have a spur. That is only one spur per socket is allowed and the number of spurs must not exceed the number of sockets.
Can I install a fused spur myself?
As long as the job isn’t within a ‘special location’ such as a bathroom or outdoors, you’re also allowed to install additional new light fittings, switches, sockets and even add a single fused spur to an existing circuit (a ‘spur’ is a new cable and socket run as a branch from an existing socket on the ring main).
What is an unswitched fused spur used for?
Non-switched or unswitched fused spurs do not feature a manual button. Fused non-switched spurs are typically used with devices such as freezers or security lights that need to operate continuously, with no need for users to be able to turn off the current in most circumstances.
What cable do I need to run a spur?
Begin by installing the spur socket and run a length of 2.5 mm² two-core-and-earth cable back to the point where it will be connected to the main circuit cable. The junction box should have the same amperage as the circuit.
What appliances need a fused spur?
Fused spurs are commonly used as an alternative to a conventional socket, for the installation of powerful electrical appliances that can be installed without a plug, such as ovens, washing machines, electric heaters, dishwashers, fridges, and so on.
How many times can you spur off a radial circuit?
The simple answer to this question is yes you can and this is known as a spur, or spurred socket, but there are a few things that you nee to be aware of. You can add one further accessory or socket off of a single socket present in a radial circuit and no more.
Is it OK to spur off a socket?
You mustn’t run a spur from a socket that’s already on a spur, or that already supplies a spur. An alternative to running a spur from an existing socket is to run it from a 3-terminal, 30-amp junction box wired into the main circuit cable.
Do you need an electrician to spur a socket?
You mustn’t run a spur from a socket that’s already on a spur, or that already supplies a spur. If you’re in any doubt about whether the socket from which you plan to run is part of a ring circuit, you’ll need to consult a qualified electrician.
What can a non qualified electrician do?
What Are DIYers And Non-qualified Handymen Permitted To Carry Out? Anything that includes replacement, minor repairs and like for like changes such as adding extra (or moving) switches, lights and plug sockets. Changing old or damaged electrical wires.
How many amps does a fused spur need?
A fused spur connection unit would then limit your load to 13 Amps/Although you can have a number of socket outlets. Also the cable first fixed may need to be 4mm if dropped down the cavity with the insulation touching or surrounded. This spur looks as if it will be wired into an existing socket on the house power ring main.
How to install fused spur sockets and switches?
How To Install A Fused Spur Fused spurs can switched or unswitched and are fitted with a fuse to protect the circuit. Connect the cables as in the diagram ensuring that the load cable is connected to the appliance in use. Fused Spur Wiring Diagram
Can you wire a spur to a ring main?
You can see how to wire a spur to an existing socket from the images below. The first image is how the back of your double socket should look and the second is the wiring for a spur. A general rule for a ring main is that if you only have two cables in the back of an existing socket then it is ok to spur.
Can you use fused Spurs on a ring?
unfused spurs from a ring should be in the same cable as the ring and only feed one (single or double) socket (you used to be allowed 2 singles on an unfused spur from a ring but this was banned because they were often replaced with doubles) fused spurs starting from a FCU may feed any number of sockets and must be wired with at least 1.5mm cable
