Is a R32 GTST fast?
Is a R32 GTST fast?
An R32 GTS-T will do 0-60 in 6.4 seconds. A reasonably modified GTS-T with the stock turbo will be able to squeeze out a sub-six second 0-60 with ease.
Are R32 GTST reliable?
Re: r32 skyline reliable? (rb20det_pwr) the car its self yes is reliable but for the motors they are just like any other motor you just need to keep up on maintance. Like coil packs spark plugs and such.
What offset for R32 GTR?
Normally, 9,5J ET+22 is the way to go for R32 GTR. You’d have to check if you have those margins (especially on the inside) if it would come into contact with anything when installed, you can always use a 7mm spacer to push it back out again.
What does GTST mean on a skyline?
As has been previously answered, GTS on the Nissan Skylines stands for Grand Turismo Sport. Nissan skylines come in a myriad of configurations. From rear drive naturally aspirated engines to all wheel drive, 4 wheel steering, Twin Turbo engines.
How fast is a stock R33 GTST?
Top Speed: 143 mph (230.1 kph) 0-60 mph (96.6 kph): 5.9 secs.
How much HP does a R32 GTST have?
| Nissan R32 Skyline GTS-t Coupe Engine Technical Data | |
|---|---|
| Compression Ratio : | 8.50 |
| Maximum power – Output – Horsepower : | 215 PS or 212 bhp or 158 kW @ 6400 rpm |
| Maximum torque : | 265.0 Nm or 195 lb.ft @ 6400 rpm |
| Drive wheels – Traction – Drivetrain : | RWD |
Can you daily drive a R32?
I used my R32 GTR as a daily at times… You can JUST get by with it. Depending on your clutch, suspension and tyre setup. You get a bumpy ride if everything is set up for “racing”, if it is all stock, you will be fine.
Are skylines reliable?
THE R31 Skyline is robust and generally reliable once you’ve become used to the howling diff. I’d suggest you test for leaks from cylinder to cylinder and from each cylinder to the water jacket.
What size wheels fit a r32 GTR?
Best size would be 9.5×18 ET 20 or 22 with 265/35/18. Avoid staggered setup as used by GTS etc. as this will put wear on your transfer box as all tyres need to be the same size/ rolling radius.
What is offset wheel?
Offset refers to how your car’s or truck’s wheels and tires are mounted and sit in the wheel wells. Positive wheel offset is when the hub mounting surface is in front (more toward the street side) of the centerline of the wheel. Most wheels on front-wheel drive cars and newer rear-drive vehicles have positive offset.
What does R32 GTST stand for?
GTR = all wheel drive and twin turbo. GTST = rear wheel drive and single turbo. The above is the same for every model R32, R33 and R34 that is the most basic and common difference between the words gtr and gtst.
How much is a R32 GTST worth?
A: The average price of a Nissan Skyline GTS-t – R32 is $13,956.
Which is better R33 GTST or GTR wheels?
R33 GTST The difference between the gtst and the gtr should give you a clue as to what design of wheel would look better. Because the gtst does not have the “phatness” of the gtr, Wheels with big dish go a long way to enhancing the appeal of the gtst from a looks perspective.
Is there a Nissan Skyline GT are R33?
The Nissan Skyline GT-R R33 was the successor to the immensely successful BNR32 Skyline GT-R and the car that ultimately led to the BNR34 Skyline GT-R by time the 1990s came to a close. This Nissan Skyline GT-R (R33) has come out in the following 1/64 scale versions:
How big are the wheels on a R32 GT-R?
Wheel width = 10.5″ Good work Sydneykid, now let’s see all the R32 GT-R people posting! Modifications to fit = Roll & flare guards, stick out about 4cm from existing guards. needs a rear bar for them to look good… not good for defects….. almost needs widebody…
