How much horsepower does a case 580k have?
How much horsepower does a case 580k have?
Engine
| Aspiration | Turbocharged |
|---|---|
| Gross Power | 63.1 hp (47 kw) |
| Net Max Torque | 186 lbs/ft |
| Net Power | 68.4 hp (51 kw) |
| Number of Cylinders | 4 |
What years were 580k cases made?
Ten year-old memory is a little fuzzy, but I believe the L series came out in 1995, the K models were built from about 1987 to about 1994.
How much can a Case 580 backhoe lift?
Loader Specifications The maximum capacity that the bucket can be loaded with and lifted to full height is 6,182 pounds. The bucket can dump the load at a maximum of 8 feet, 8 inches. At the full height, the bucket can be extended 2 feet 5 inches.
How much does a 580 Case backhoe weight?
14250 lbs
Operating Specifications
| Alternator Supplied Amperage | 90 A |
|---|---|
| Oil System Fluid Capacity | 3.6 gal (14 l) |
| Operating Voltage | 12 V V |
| Operating Weight | 14250 lbs (6,464 kg) |
| Operating Weight 2wd | 14285 lbs (6,480 kg) |
What engine does a case 580k have?
Case 580k Super M Loader Backhoe Specifications
| Engine | ||
|---|---|---|
| MAKE | Case | |
| GROSS POWER | 95 hp | 71 kw |
| DISPLACEMENT | 272 cu in | 4.5 L |
| POWER MEASURED @ | 2200 rpm |
How long is a Case 580k backhoe?
CASE 580K Dimensions
| Front Wheel Tread Width | 67.5 in (171 cm) |
|---|---|
| Rear Wheel Tread Width – min | 62 in (157 cm) |
| Transport Length | 16.9 ft (5 m) |
| Transport Width | 6.9 ft (2 m) |
| Wheelbase | 7 ft (2 m) |
How do I find out what year my Case tractor is?
Take the first and the fourth digit, and subtract three to get the year. For example, the serial number of 395602 would be: 36-3 = 1933. From around 1938 on Case adopted a seven digit numbering system. To determine the year of manufacture for a seven digit number, pre 1953, take the first two digits and subtract four.
What is the smallest Case backhoe?
1CXT Compact Backhoe Loader
JCB’s 1CXT compact backhoe loader has a 60% smaller footprint than a full-size backhoe loader. JCB’s 1CXT backhoe loader, the company’s smallest backhoe model, is now available to customers in the United States and Canada.
How much can a JCB backhoe lift?
This makes the JCB backhoe the highest lifting capacity machine available. The 3CX/4CX SUPERs also feature an 11,000lb lifting point and heavy-duty lift cylinders as standard. clearances of up to 1ft 1in (340mm), together with 20° departure angles.
What does a case 580l weigh?
12817 lbs
Operating Specifications
| Alternator Supplied Amperage | 65 A |
|---|---|
| Fuel Capacity | 31.4 gal (119 l) |
| Hydraulic System Fluid Capacity | 33 gal (125 l) |
| Operating Voltage | 12 V V |
| Operating Weight 4wd | 12817 lbs (5,814 kg) |
What motor is in a Case 580k backhoe?
Case 580k Super M Loader Backhoe Specifications
| Engine | ||
|---|---|---|
| MAKE | Case | |
| Loader | ||
| BUCKET CAPACITY | 0.87 yd3 | 0.67 m3 |
| BUCKET WIDTH | 82 in | 2080 mm |
What is the weight of a John Deere 310 backhoe?
14,669 lb.
Max Standard Dipperstick Digging Depth: 4.30 m (14 ft. 1 in.) Operating Weight: 6,654 kg (14,669 lb.)
How tall is a 1988 case 580K backhoe?
1988 Case 580K Backhoe. 68 Horse Power. Case 4-390, Turbo engine. 8785 lbs. Operating Weight. Backhoe load height 10.6 ft, 18 ft reach, 14.6 ft dig depth, dig force 9800 lbs., Loader lift capacity …See More Details
What kind of front axle does case 580K have?
The 580K features a Carraro model 710 four-wheel-drive front axle, while the 580SE had a model AE2. The new axle provides: • Tapered roller bearings instead of ball bearings in the spindles for improved reliability. • Steering angle increased 18 percent, from 33 degrees to 39 degrees, for improved maneuverability.
What’s the difference between a 580se and a 580K?
The 580SE’s the right loader upright. The 580K 12.5 gallons (47.3 L) to 21 gallons (79.5 L). drive units. In contrast, the 580SE used two different main frames. For improved reliability and vibration absorption, the 580K features a double front-engine mount.
Where is the fuse box on a backhoe 580K?
The fuse box for the individual circuits is located on the front bottom side of the instrument panel and is easily accessible from the operator’s compartment. connectors are used on the 580K. batteries into the box without having to install a larger box. This results in the dealer and the customer.
