Easy lifehacks

What transmission is in a 1993 Chevy k1500 4×4?

What transmission is in a 1993 Chevy k1500 4×4?

4L60E
Chevrolet Silverado 1993-1994 Rebuilt Transmission 4L60E.

How to identify manual transmissions on Chevy 1988-1992 trucks?

How Do I Identify Manual Transmissions on Chevy 1988 -1992 Trucks? The five transmissions installed on 1988 to 1992 Chevrolet trucks, according to Drivetrain.com, were the Borg-Warner T5, the Getrag, Muncie or New Venture models HM290, 5LM60 and NV3500 and the New Venture NV4500. The NV4500 appeared on 1992 full-sized trucks only.

Do you need a new transmission on a Chevy C3500?

Your Chevrolet C3500 is a massive and strong pick-up truck you rely on for hauling power and other heavy-duty work. When the transmission starts giving you trouble by slipping in and out of gear, you need to get a new automatic transmission for Chevrolet C3500 from AutoZone.

When did the GM 4L80 E transmission come out?

It was an evolution of the Turbo-Hydramatic 400, first produced in October 1963. 4L80-Es were optioned only in Chevrolet/GMC pickups, vans, and commercial vehicles, and the Hummer H1.

What kind of transmission does a Chevrolet Performance use?

Chevrolet Performance New and Remanufactured Transmissions Complementing your Chevrolet Performance crate engine with a factory-engineered new or remanufactured performance transmission is a cinch with our comprehensive lineup of automatic transmissions, torque converters and installation kits.

What kind of transmission does a 1993 Chevy 3500 have?

Transmission. The 1993 trucks came in either rear-wheel or four-wheel drive. The four-wheel-drive trucks were the K3500 models, and the C3500 models were rear-wheel-drive. The standard transmission was a five-speed manual transmission with overdrive, but four-speed automatic transmission with overdrive was an option.

What was the towing capacity of a 1993 Chevy 3500?

For these two versions, the legroom was 41.7 inches, the shoulder room 66 inches, the hip room 60.5 inches and the headroom 40 inches. The extended-cab and regular-cab versions sat three people and had a maximum towing capacity of 10,000 pounds, with a max payload of 3,910 to 4,019 pounds.

What kind of transmission does the Turbo 350 have?

The Turbo 350 is a 3-speed automatic transmission. The Mega Monster Transmission features: the latest technology in our industry with only the best internal components for increased strength, dependable performance and monster torque capacity.

What kind of transmission does a Chevy 6L80E use?

It is ideal for vehicles powered by engines producing up to 550 horsepower using pump gasoline. Equipped with a Manual/Automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic.

Author Image
Ruth Doyle
Easy lifehacks

What transmission is in a 1993 Chevy K1500 4×4?

What transmission is in a 1993 Chevy K1500 4×4?

4L60E
Chevrolet Silverado 1993-1994 Rebuilt Transmission 4L60E.

What’s the difference between a 4L60E and a 4L60?

4L60E vs 4L60: Biggest Differences The biggest difference between the 4L60 and 4L60E is how they are controlled. The 4L60E is controlled by a computer, while the 4L60 is controlled by a TV cable.

What kind of transmission is the 4L60E?

What is a 4L60E Transmission? The 4L60-E is an automatic shift, four-speed overdrive, longitudinally positioned transmission. It has been considered to be the best rendition of the finest overdrive automatic transmission ever produced.

Where is the cooling inlet on a Chevy 4L60 automatic transmission?

The automatic transmission usually has its cooling inlet on the right side with a square oil reservoir. The key distinction of the 4L60E automatic transmission (1997-2006) from the early 4L60E (1992-1997) or 4L60 (1990-1992) or 700R4 (1982- 1989) is the “six hex bolts” of the rear output or rear cover.

How much fluid does a GM 4L60E need?

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid, Below is a list of common transmission problems with the GM 4L60E Transmission and possible solutions to repair.

When to replace the accumulator housing on a 4L60E?

Check the yellow spring inside the accum housing for breakage. Also, if the accumulator housing walls are scored, the housing must be replaced. 4. 1-2 shift is delayed and harsh, may not shift into OD: TPS needs to be checked for smooth and linear electrical response over the entire range of motion. If not, this must be replaced. 5.

What is a 4L60E Transmission? The 4L60-E is an automatic shift, four-speed overdrive, longitudinally positioned transmission. It has been considered to be the best rendition of the finest overdrive automatic transmission ever produced.

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid, Below is a list of common transmission problems with the GM 4L60E Transmission and possible solutions to repair.

Check the yellow spring inside the accum housing for breakage. Also, if the accumulator housing walls are scored, the housing must be replaced. 4. 1-2 shift is delayed and harsh, may not shift into OD: TPS needs to be checked for smooth and linear electrical response over the entire range of motion. If not, this must be replaced. 5.

What causes a WoT Shudder on a 4L60E?

3. 1-2 Shift shudder at WOT (Wide Open Throttle); delayed or abnormal 1-2 shift; There’s a problem ONLY on the 1-2 shift: 1-2 accumulator piston cracked or stuck cocked in the bore. Check the yellow spring inside the accum housing for breakage.

Author Image
Ruth Doyle