How do you reset the oil life on a 2013 Honda Odyssey?

How do you reset the oil life on a 2013 Honda Odyssey?

2013 Honda Odyssey Maintenance Light Reset & Fluids

1. Turn the ignition to run (one position before starting engine).
2. Press and hold the SELECT/RESET knob for 10 seconds or more.
3. Turn the SELECT/RESET knob to select oil life.
4. Press and hold the SELECT/RESET knob to enter the oil life reset mode.

How do you reset the oil life on a 2013?

Recommended Articles:

1. Get in the car and turn it on. Start off being inside the vehicle and you’re going to need the vehicle key.
2. Go to the main menu.
3. Select SETTINGS.
4. Scroll to the VEHICLE.
5. Highlight and select the OIL LIFE RESET.
6. Hold down the OK button.

How do you reset the oil life on a 2009 Honda Odyssey?

How To Reset Oil Life Maintenance Light On Honda Odyssey

1. Turn on the car without starting the engine.
2. Press the Select/Reset knob repeatedly until the “Remaining Oil Life” appears on the display.
3. Press and hold the Select/Reset knob.
4. Release it and hold it again for 5 seconds.

How do you reset the oil life on a Honda Odyssey?

Turn the ignition switch to “On“. Do not start the engine. Toggle the “SEL/RESET” button to display the “Oil Life %” (if it’s not displayed already). While the “Oil Life %” is displayed, press and hold the “SEL/RESET” stem for 10 seconds.

How do you reset the oil life on a 2012 Honda Odyssey?

To reset the oil life indicator in the 2012 honda odyssey, turn the ignition to the on position. Then, press and hold the reset or select button for ten seconds. Release and hold again for five seconds.

How do you reset the oil life on a 2013 CMAX?

Follow these steps to reset this light:

1. Press the start/stop button once (do not start the engine).
2. Press both the accelerator and brake pedals at the same time.
3. Keep both pedals fully pressed.
4. After three seconds, the Service: Oil reset in prog.

How do I reset the oil life in 2013 Ford Focus?

Place the key in the ignition and cycle to the “on” position without starting the car. While doing this, depress both the brake and gas pedals at the same time. After 3 seconds the center information display will read “Oil Reset in Progress”. After 25 seconds the display will read “Oil Reset Complete”.

How do you reset the oil light on a Cmax?

To reset the service light on a ford c max, turn the ignition to “on” and simultaneously press the gas and brake pedals for about 25 seconds until the display shows “service: oil reset complete.”

How do you reset the oil light on a 2015 C Max?

2013-2015

1. Turn the ignition to the ON position without starting the engine.
2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position.
3. After 3 seconds, the message center displays “Service: Oil Reset In Prog”