What was the name of the 1993 Chevy Lumina?

For 1993, the CL trim was renamed LS; the Lumina APV badging was removed from the doors. For 1994, the model underwent a mid-cycle revision and was renamed the Chevrolet Lumina Minivan (in place of the APV suffix). The Chevrolet Lumina APV is a GM U-body vehicle, using the GMT199 platform designation.

When did the Chevrolet Lumina APV come out?

At its 1990 introduction, the Lumina APV was offered in two trim levels; a base trim and an up-level CL trim. Base-trim versions featured chrome exterior trim while CL versions were produced with red exterior trim and badging (similar to the Lumina Euro). For 1993, the CL trim was renamed LS; the Lumina APV badging was removed from the doors.

How big is the wheelbase of a Lumina APV?

The Lumina APV has a 109.8 inch wheelbase, sized between the Lumina sedan/coupe and the Astro/Safari. In line with the Chrysler minivans, the Lumina APV was fitted with independent front suspension with MacPherson struts.

What kind of chassis does a Chevrolet Lumina use?

Chassis specification. The Chevrolet Lumina APV is a GM U-body vehicle, using the GMT199 platform designation. In contrast to the unibody design used by the Astro/Safari and the Van/Vandura, the Lumina APV chassis uses a chassis design similar to the Pontiac Fiero and Saturn SL, with a galvanized steel spaceframe supporting exterior body panels.

Where was the Chevrolet Lumina APV made at?

In terms of size, the Lumina APV was slotted between the Chevrolet Astro and full-size Chevrolet Van . During its production, the Lumina APV and its Pontiac and Oldsmobile counterparts were assembled at the North Tarrytown Assembly facility, becoming the final vehicles produced there prior to its closure.

What kind of engine does a Chevrolet Lumina have?

In contrast to the Astro/Safari, which used a variety of components from Chevrolet/GMC light trucks, the front-wheel drive GMT199 platform was dedicated to the Chevrolet, Pontiac, and Oldsmobile minivans, sharing primarily engines and transmissions with other GM vehicles.

When did the Chevy Lumina APV get rear wheel drive?

For 1997, Chevrolet adopted a distinct nameplate for its front-wheel drive minivan, replacing the Lumina APV with the Chevrolet Venture . In response to the first-generation Chrysler minivans, General Motors introduced the rear-wheel drive Chevrolet Astro (and GMC Safari) for the 1985 model year.

What’s the difference between a Chevy Astro and a Lumina?

Produced upon the GM10 platform (later designated the GM W platform), the Chevrolet Lumina replaced both the Chevrolet Celebrity and Chevrolet Monte Carlo; smaller than the Chevrolet Astro, the Lumina APV replaced the Celebrity station wagon.

What kind of body does a Chevrolet Lumina have?

The North American Chevrolet Lumina was based on the mid-size GM W-body, which was shared with the Pontiac Grand Prix, Oldsmobile Cutlass Supreme (later Intrigue ), Buick Regal, and Buick Century (after 1996).

Where was the Chevrolet Lumina made in Canada?

Throughout its production, both generations of the Lumina were produced by General Motors Canada at Oshawa Car Assembly (Oshawa, Ontario). For markets outside of North America, the Chevrolet Lumina was derived from other large GM sedans.

When did the Chevy Lumina APV sliding door come out?

For 1993, the Lumina APV (and its counterparts) introduced a power-operated sliding door, the first American-market minivan to offer the design. Coinciding with the use of a galvanized steel spaceframe (in place of a conventional unit-body design), the Lumina APV was fitted with composite plastic (SMC) body panels.

Are there any cars that automatically lock their doors?

Available on most GM vehicles equipped with Keyless Access, Passive Locking will lock the doors of a vehicle automatically. Find out more about it here. Sign In

What kind of brakes does a Lumina APV have?

As an option, Chevrolet offered the Lumina APV with load-leveling rear air springs, utilizing the air compressor that inflated the rear air springs for auxiliary use with an air hose kit. The front brakes were vented discs, with drum brakes at the rear; anti-lock braking (ABS) was introduced for 1992.

What happens when you hit the brakes on a Chevrolet Lumina?

When you hit the brakes in your Chevrolet Lumina, hydraulic pressure forces brake pads against brake rotors to slow the car. Braking creates a great deal of friction and heat that over time wear the brake pad material away.

Is the Lumina APV a front wheel drive vehicle?

Though manufactured on a model-specific chassis, the Lumina APV was front-wheel drive, deriving its powertrain from GM sedans. In terms of size, the Lumina APV was slotted between the Chevrolet Astro and full-size Chevrolet Van .

What’s the difference between a Lumina and Astro minivan?

Closely matching the 1987-1990 Chrysler “Grand” minivans in length, width, and height, the Lumina APV is nearly 10 inches (250 mm) lower than the Astro and 3 inches (80 mm) narrower. For 1993, the Lumina APV (and its counterparts) introduced a power-operated sliding door, the first American-market minivan to offer the design.

Is the Oldsmobile APV the same as the Chevrolet Lumina?

Chevrolet would receive a Lumina APV, with Oldsmobile receiving the Silhouette; Pontiac adopted the Trans Sport name from the 1986 concept van. During its development, the APV model lines largely benchmarked the extended-length Chrysler vans, closely matching their length, width, and height (on a shorter wheelbase).

Where was the Chevrolet Lumina APV minivan made?

During its production, the Lumina APV and its Pontiac and Oldsmobile counterparts were assembled at the North Tarrytown Assembly facility, becoming the final vehicles produced there prior to its closure. For 1997, Chevrolet adopted a distinct nameplate for its front-wheel drive minivan, replacing the Lumina APV with the Chevrolet Venture.