When did the Chevy 4L80E transmission come out?

Unlike the later 4L60E transmission, the 4L80E did not feature a removable bellhousing, but an integrated bellhousing with only the Chevrolet 90 degree engine bolt pattern being available. In 1991 the 4L80E was rolled out in GM trucks, including the Sierra, Silverado, Suburban, etc. as well as the Hummer H1.

Is the transmission in 1st or reverse on a Silverado?

Transmission only is in 1st and reverse. gears silverado Q: Transmission only is in 1st and reverse. Chevrolet Silverado 1500 transmission when in drive stuck in 1st gear and will go in reverse. Changed the VSS, TPS, TCC PVM. No change. Reverse and first only. Won’t shift out of first when in drive. Red lines in first when in drive.

Is the GM 700R4 a heavy duty transmission?

The 700R4 was a pretty tough transmission, but not quite in the class of the TH400. GM needed a heavy-duty automatic overdrive. GM used as many TH400 parts and designs as possible in the 4L80E, but the added overdrive gear would require an extra gearset and slightly longer (~1-1/2″) case.

What does DTC 79 on a 4L80 do?

It is the Transmission Fluid Temperature Sensor. DTC 79 is transmission fluid Overtemp. A defective temp sensor will prevent overdrive. Use a multimeter between pins L and M to check for resistance. The temperature is related to resistance.

What’s the difference between GM 4L80 and 4L85?

Readers may also note that the 4L80 and 4L85 terms are sometimes used without the “E” suffix, as all GM automatics are now electronically controlled and therefore in no need of differentiation. The 4L80 nomenclature denotes that the transmission is a 4-Speed, Longitudinally mounted, and for 8000 lbs. vehicle weights.

Do you need a transmission controller for a GM 4L80?

Engine Compatibility While the 4L80 is generally mechanically compatible with Chevrolet style GM engines, it does require a transmission controller. That controller may be the factory-integrated with the PCM as on 1991-1999 TBI & Gen II engines, with the 1999-2007 Gen III engines, or the 2007+ Gen IV engines.

What kind of converter does a Chevy 4L70E use?

The 298mm converter is used behind the traditional GEN I or GEN II small-block engines, while the LS applications employ the 300mm converter and corresponding input shaft. Beginning in 2007, the 4L70E transmissions upgraded the input shaft with an integrated input shaft speed sensor.

What kind of torque converter does GM 4L80 have?

The torque converter is a fluid turbine drive and like those on its predecessor transmissions; the TH350C, 700R4, and 4L60, the 4L80 features a lock-up pressure plate for direct mechanically coupled driving from the engine crank. The 4L80 features a 310 mm torque converter. As to length, this transmission is 26-1/4″ long.

Is the 4L80 transmission compatible with the CJ5?

The 4L80 is doubtless a very successful OEM transmission, and a terrific conversion transmission in the right Jeeps and situations. However, with its 26-1/4″ length, it is a longer transmission and is not compatible with short-wheelbase Jeeps such as the CJ5 in any scenario, or CJ7’s if they have a lot of suspension lift.

What kind of case does a GM 4L80E have?

Like the other GM automatics, the 4L80E featured a die-cast aluminum case. Unlike the later 4L60E transmission, the 4L80E did not feature a removable bellhousing, but an integrated bellhousing with only the Chevrolet 90 degree engine bolt pattern being available.

What is the TBI code on a 1990 Chevy truck?

Consult a service manual or see below for any check engine light code definitions. You can use a late 80’s or early 90’s GM TBI definition. If you have access to a scan tool use a hook up for a 1990 350 cu. in. 5.7L Chevrolet truck. For some scan tools enter VIN 10th“L” 3rd“C” 8th“K”.

Why do I have bad shifting on my 4L80E?

In addition to erratic shifting, the trans control program will default to backup shifting mode if you drive it long enough with this bad sensor, and as a result line pressure through the valve body will be boosted to maximum value, creating harsh shifting.

When did the Chevy 5.7 liter engine come out?

Chevrolet put its 5.7-liter engine in several vehicles from 1988 through 1992. The Suburban, C/K3500 and the G30 vans all had options for the 5.7-liter.

What was the horsepower of a Chevy Suburban in 1991?

In 1991, the 5.7-liter engine had a horsepower low of 190 hp, in the C/K3500 and the long-wheelbase Suburban. The Suburban had the highest horsepower rating, at 210 hp, in the short-wheelbase Suburban.

Which is better 4L60E or 4L80E driveshaft?

The 4l80e driveshaft is longer than the 4l60e and this has to be considered when doing your swap. However, the same thing applies here. If your car model came with the 4l80e transmission from the factory, get a driveshaft from one of these models if possible.

Where are the oil cooler lines on a 1996 Chevy 4L80?

I have a 1997 Chevy, C3500HD 6.5L Turbo Diesel, Crew Cab, Cab and Chassis with a 4L80. The oil cooler lines are spaced between the front and the rear. Can anyone tell me how to adapt the lines to 1996 4L80 with over and under oil cooler lines? I know that I am probably over thinking this question but I would appreciate any input y’all can give.

Do you need a core deposit for a 4L80E transmission?

If you are not completely satisfied with your transmission when it arrives, send it back for a full refund. Our 4L80E is the functional and visual equivalent of a new transmission. If for any reason it does not meet this description we want it back. No Core Deposit. We do not charge a core deposit.

What’s the difference between a truck and a 4L80E?

My truck is a 99 with a 350 the transmission im looking at is a 96 with a 454 The control system is the same for all 4l80e’s with 1 exception. 91-93 4l80e’s used a different pressure control solenoid that required a clean8ng cycle every 10 seconds where the solenoid was stroked from full open to full closed and back to normal operation.

What kind of transmission does a Chevy Silverado have?

USED 2012 SilvK2500 AUTO TRANS 6L90 4×4 219k! Outright Shipped MYD 28786 (Fits: Chevrolet Silverado 2500 HD)

What’s the difference between GM 94 and 94l85e?

In 94 this circuit was eliminated. Sometime in the 21st century GM changed suppliers for the pressure control solenoid again, but it still works the same way. So 94+ 4l80e and 4l85e’s all work identical electrically, and you can quickly make a 91-93 work with a later controller by changing the pressure solenoid to later style.

What causes shift feel in 4L80E transmission?

Inconsistent shift feel, Shift solenoid filter blow-out, and Premature unit failure A complete pressure regulator valve train is supplied in the 4L80-E kit. This corrects Fail-safe, runaway high pressure that will crack the case if not corrected.

Is there a warranty on a 1993 4L60E?

Returning the core is optional. This transmission comes with a 1 Year 36,000 Mile Warranty with the purchase of a new torque converter. We offer an extended Warranty 2 Year 50,000 Mile Warranty, or a 3 Year 100,000 Mile Warranty for an additional charge. Any and all shipping costs, including freight damage claims.

What kind of valve train does a 4L80E use?

A complete pressure regulator valve train is supplied in the 4L80-E kit. This corrects Fail-safe, runaway high pressure that will crack the case if not corrected. The PR valve train supplied in this Shift Correction Package will stop runaway high pressure before it happens.

What kind of truck does the 2500HD use?

The classic body style 2500HD trucks used the 4L80E (their actually refered to as a 4L85E) behind the 6.0’s. The D-max and 8.1 trucks use the Allison.

When did the GM 4L80E transmission come out?

Despite its name, the 4L80E is not an upgrade to its GM counterparts. Introduced alongside the original 4L60 in the early 1990’s the 4L80E was designed for large trucks and is designed as a heavy duty unit, rather than a transmission for smaller cars or even some pickups.

The classic body style 2500HD trucks used the 4L80E (their actually refered to as a 4L85E) behind the 6.0’s. The D-max and 8.1 trucks use the Allison.

Can a 4L80E Trans shift in reverse?

I’ve got a 1992 chevy 2500 4×4 6.5TD/4L80E 3.42 gear The trans shifts great in all forward gears, no codes, and locks up the torque converter as it should. no slipping whatsoever. When put in reverse it clunks like its engaging, then won’t move, no sign of moving. It clunks like its in, but 100% freewheels.

When did the 6.0 liter Chevy engine end?

The 6.0-liter Chevy/GM V8 saw its final breaths in the year 2019 before it was axed and officially replaced with the Ecotec3 6.2-liter V8 that had slowly been taking over the truck and SUV lineup since 2013. Which Chevy 6.0 is Right for You?

What kind of truck is a 2006 Silverado?

My truck is a 2006 2500hd 6.0l 4×4 and I have an extra trans cooler in addition to the factory auxiliary cooler. Initially I was thinking that my coolers were plugged because the line coming from the transmission was hot and the line returning from the coolers was the same as ambient temp.

How much torque can a 4L60E transmission handle?

The 4l60e transmission can handle a max torque of around 350nm, while the 4l80e can handle 450nm~ or even more. These numbers can differ a lot and you will get a lot of different answers about how much these can handle. We have to remember that there is a big difference in the durability between a 30-year-old transmission and a new one.

What’s the difference between TH400 and 4L80E transmission?

The transmission uses electronics to control shift points. The 4L80E transmission is 4 inches longer than the TH400. The rear tailhousing bolt indexing bore diameter was changed on the 4L80E.

Is there a reverse on a c2500 6.5 TD?

On a mildly chilly morning, my 95 c2500 6.5 TD (4L80E) reversed 2 feet and all of a sudden, felt like a fuse popped. No reverse now -not even a hint of reverse. All forward gears work perfectly. The fluid was brown and low. I drained the pan, replaced the filter, filled it back up.

What kind of transmission does a Chevy C3500 have?

USED 01 C3500HD Auto Trans Diesel 6.5 type 4L80 w E BRAKE 129k! SHIPPED 28582 1999 – 00 Chevy 2500 3500 5.7 4×4 4L80E auto transmission WILL SHIP!

Can a GM crate 4L80E be used in a Duramax Van?

Many people have bought GM crate 4l85e’s for the 06-07 duramax van, and put them into 94+ with no issues other than hooking up the cooler lines (they can be swapped into the earlier 91-93 with some mods as well). I have an 06 3500 4L80E 2-wheel drive WT I need a transmission and can only afford one from a junk yard what all trucks will fit?

Is the TH-400 4L80E a good transmission?

The 4L80E, an electronic, overdrive-equipped version of the venerable TH-400, is tough enough to handle just about whatever hell you put it through when built properly. But while the 4L80E is a strong, heavy-duty transmission, during the first few years of production the 4L80E was not as durable as its design permitted due mainly to faulty parts.

What kind of transmission does a Silverado 6.5 diesel have?

For Silverado and Sierra pickups, the engine was backed by either a 4L80E 4 speed automatic transmission (with overdrive) or the popular NV4500 5 speed manual transmission. Common problems with the 6.5 diesel include crankshaft, glow plug, and PMD failure.

What kind of transmission does a 4L80E have?

Engineered to Dominate, the 4L80E Mega Monster transmission is tough enough to withstand the rigors of even the toughest street machines delivering tire-spinning shifts race after race. It is ideal for vehicles powered by engines producing up to 550 horsepower using pump gasoline.

Is the TH-400 4L80E a race car?

The 4L80E is being found in more and more high performance, race, and tow vehicles over the last few years. And it’s no secret why. The 4L80E, an electronic, overdrive-equipped version of the venerable TH-400, is tough enough to handle just about whatever hell you put it through when built properly.

Is the 4L80E Mega Monster transmission Tough Enough?

Popular Accessories (These have been Discounted for your transmission package!) Engineered to Dominate, the 4L80E Mega Monster transmission is tough enough to withstand the rigors of even the toughest street machines delivering tire-spinning shifts race after race.

How can I tell if my GM 4L60E transmission is the same?

The easiest way to tell where the 4L60E in question came from is to look at the sticker that GM puts on top of the transmission. That’ll tell you all about what year it was manufactured and what vehicle it came in. For more on that you can always check out the 4L60E identification page on this site.

What’s the difference between the 4L60E and 4L80E?

One of the similarities between these transmissions is that both of them are electronically controlled. The bolt pattern for the transfer case is also the same so it will fit in a swap without problems. One thing to consider is that the 4l60e was named th350 and 700r4 before in earlier models and the 4l80e was named th400.

Can a 4L60E be used as a torque converter?

Alternatively, you can use the flex plate and the torque converter from the 4l80e transmission. The engine control unit often has to get reflashed and reprogrammed for the 4l80e transmission to work properly. You can search the web or find a local dealer to do this job for you.

Is the transmission on a Chevy Suburban rebuilt?

This is a Chevy Suburban 4L60e 1500 1995-1997 Rebuilt Transmission. Transmission is rebuilt like new with all OEM updates and includes a torque converter and 5 Year Unlimited Mileage Warranty . FREE SHIPPING.

Is there a transmission cooler for a suburban?

Transmission Cooler ($49.99) This is a Chevy Suburban 4L60e 1500 1995-1997 Rebuilt Transmission. Transmission is rebuilt like new with all OEM updates and includes a torque converter and 5 Year Unlimited Mileage Warranty . FREE SHIPPING.

What kind of transmissions did Chevy use in 1988?

The five transmissions installed on 1988 to 1992 Chevrolet trucks, according to Drivetrain.com, were the Borg-Warner T5, the Getrag, Muncie or New Venture models HM290, 5LM60 and NV3500 and the New Venture NV4500. The NV4500 appeared on 1992 full-sized trucks only.

What is the RPO code for a GM 4L80 transmission?

The 4L80 nomenclature denotes that the transmission is a 4-Speed, Longitudinally mounted, and for 8000 lbs. vehicle weights. It’s RPO code is “MT1” and has been domestically manufactured in GM’s Ypsilanti and Willow Run plants.

When to change transmission fluid on Chevy Suburban?

This video will show you how to service your 4L80E or 4L85E Transmission by replacing the filter, fluid, and pan gasket. These transmissions are found on a number of vehicles manufactured between 1991 and present day, including the Chevrolet Express/GMC Savannah, Chevrolet Suburban 2500, Silverado/Sierra, and many others. Loading…

Can a remanufactured 4L80E transmission save you money?

Reman 4L80E vs. Used 4L80E? Buying a used 4L80E transmission may save you money. However, if the unit does not work properly after installed, you will more than likely have to pay the labor again for removal and reinstall of the transmission PLUS the freight to ship the transmission back to the salvage yard.

What kind of transmission harness does GMC 4L80E use?

4L80E Transmission: Pre 4L80E transmissions use a different internal wiring harness and pass-through connector. This early harness has a problem with leaking fluid at the pass-through connector. GM recommends upgrading to the newer connector and wiring harness. Because of this, we do not provide a wiring harness for it.

What kind of dipsticks does a Chevy 4L80E use?

Transmission Fluid Dipsticks, Midnight Series Flexible Braided Stainless, Firewall Mount, Case Entry, Black Tube, Black Handle, Chevy, 4L80E, Each Transmission Dipstick, Braided Stainless Steel, Natural, Firewall Mount, 4L80E, Each Transmission Dipstick, Braided Stainless Steel, Tumble Polished, Firewall Mount, 4L80E, Case Fill, Each

What kind of transmission do I need for Chevy Express 3500?

To get the maximum amount of life from your Chevy Express 2500 or Chevy Express 3500, you need to consider investing in a remanufactured 4L80E transmission or remanufactured 6L90 transmission.

Can a remanufactured Chevy Express have transmission problems?

If this happens, your transmission can experience all sorts of problems, including ruptured seals, damaged clutches, bands, and a warped valve body. To keep this from happening to your remanufactured 4L80E transmission, Street Smart Transmission recommends installing an auxiliary transmission cooler.

Why is transmission fluid leaking out of my vent tube?

Transmission fluid is leaking out of my transmission vent tube. Why is this? No engine code comes up when I run the obd 2 on it. I just replaced the solenoid pack in the transmission valve body today cuz I had that code.

Is there a transmission cooler for a Chevy Silverado?

Transmission Cooler ($49.99) This is a Chevrolet Silverado 1995-1997 Rebuilt Transmission 4L60E . Transmission like new with all OEM updates and includes a torque converter and a 5 Year Unlimited Mileage Warranty . No core charge.

When does the transmission change on a 1997 Chevy Silverado?

Transmission changed roughly when exiting off a ramp. Driver had to turn vehicle off and wait 5-10 seconds, then restart to reset the computer. I currently own a 1997 Silverado ext cab fleet side. I’ve had my brakes serviced numerous times and it continues to pull to the left when I’m braking.

What was the problem with my 1997 Chevy truck?

Shift cable clip fell off causing loss of control of vehicle, shift cable had been replaced prior in 1997. Mjs. Truck is considered a lemon but dealer states that it doesn’t qualify for a buy back. No safety defect (s) mentioned in summary. While driving down the road on a right hand curve the steering wheel seems to try to turn right by itself.

What kind of transmission does a Chevy 2500 3500 have?

1992 – 95 Chevy 2500 3500 2×4 4L80E auto transmission WILL SHIP! (Fits: Chevrolet K3500)

How much does a 1993 Chevy 3500 diesel cost?

New exhaust. 23 highway miles per gallon. 191000 miles. 1993 Chevy 3500 6.5 turbo diesel for sale $6000. 205k miles, low for diesel and much more life left. Power windows and ac/heat. Brand new brakes on passenger front, installed at big brand tires. Great truck asking $6000 OBO Contact Alex Good running and driving 4×4 Diesel.

What’s the difference between TH-400 and 4L80E?

Jeff Smith: The physical part of bolting this transmission in the car will be easy. The 4L80E is just a longer, heavier, overdrive version of the TH-400. It uses the same first three gear ratios but adds a 0.75:1 overdrive.

What’s the price of a 1970 Chevy Impala?

8 Listings of 1970 Chevrolet Impala for Sale 1970 Chevrolet Impala – FASTBACK $399/mo* Low Miles Low Price 1970 Chevrolet Impala $434/mo* 1970 Chevrolet Impala $599/mo* Low Price Newly Listed Low Price

What kind of engine does a 1970 Chevy Impala have?

This 1970 Chevy Impala Convertible has been fully restored. Restoration costs exceed the asking price. Must see to fully a… more … convertible with a 1969 Chevrolet 427 cu in V8 engine 4 BBL carb dual exhaust with a 700R4 automatic transmission p…

What was the model year of the Chevy Impala?

The Chevrolet Impala is a full size car built by Chevrolet for model years 1958 to 1985, 1994 to 1996,… … Residing on the African Savannah and confronted with a threat, the sleek, nimble, and fast Impala will take fligh…

When did the Chevy 4L80E transmission come out?