When do dash lights come on and gauges drop to zero?

Dash lights came on and gauges dropped to zero gasoline w… When driving, occasionally all the dash lights will come on, but the gauges like gas, battery, and mileage, will all drop down to zero. Then my radio shuts off. Fortunately, the car keeps driving. All of this happened today, at a busy intersection, right before a stop light.

What are the warning lights on my dashboard?

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

What does it mean when my ” check gauges ” light comes on?

Her mechanical career has spanned 41 years working on everything from Porsches to Heavy Equipment to including classic vehicles which she owns several and has personally restored in a world dominated by men. What Does It Mean When My “Check Gauges” Light Comes On?

What happens when all the dash lights come on?

When driving, occasionally all the dash lights will come on, but the gauges like gas, battery, and mileage, will all drop down to zero. Then my radio shuts off. Fortunately, the car keeps driving. All of this happened today, at a busy intersection, right before a stop light.

Is the Check Engine light on or off?

Check engine light is on, no codes, abs light on, no known abs issues or codes, low gas light is on, full tank of gas, battery light is on, brand new Delco alternator and battery, it is charging at 14.1-14.2 volts, shift light does not come on, temp gauge and gas gauge stopped working. Absolutely no starting, driving or running issues.

Why do the lights in the CAB go out when you open the door?

It could be the door module at the latch. Do the lights in the cab turn on when you unlock/open the drivers side door? Try opening one of the other doors on the cab and see if the dash lights go out or the dome light comes on. It could be the door module at the latch.

Is the security light on when the key is running?

A lot of threads have a few posts and no follow ups. Security light is on steady, regardless if the key is on or truck is running or not.

Why do the instrument lights stay on after I Turn Off the engine?

When I turn off the engine and remove the key the instrument cluster / dashboard lights stay on and radio will not turn off. I have to remove the battery terminals to break the power. Has anyone had a similar problem? Could it be a relay failure? may be a dumb question but did you check the RAP fuse in the fuse block?

Why are the gauges on my car not working?

For the past few months I have had issues with the instrument panel gauges. While driving all of the gauges (speedometer, gas, voltage, fluid, etc.) simultaneously fail. Once this happens all of the indicator lights will flash on then go off and the gauges will come back to their proper level.

When do the gauges go off on a Dodge Ram?

Gauges go off & on when 2003 Dodoge 2500 truck hits a bump. Also NOBUS light comes on. Headlights come on also.

What does it mean when your oil pressure gauge quit?

Not a major problem but definitely a symptom. Then 2 days ago started truck, took off down the road and message center displayed battery problem, speedometer quit, tach quit, fuel gauge quit, radio began to cut out intermittently but oil pressure gauge was still okay. I got home, parked truck and turned it off.

Why does the gauge cluster go out intermittently?

Usually, if I give the dash a bit of a whack everything fires up again and then all the lights go on as if it’s going through the start up procedure with the battery light the seat belt, ABS and change oil soon light all come on. Sometimes they’ll go out and then back on when I hit a bump on the road :help

What does it mean when your speedometer is not working?

If the oil pressure, coolant, charge, or gas gauge doesn’t work or works erratically, the problem is in the gauge, wiring, or sender. Speedometers are unique in that some of them use physical cables instead of sensors, so a speedometer not working can also indicate a broken cable or stripped gear.

What does it mean when gauges in your car stop working?

But when the gauges in your car stop working, it’s not a situation you can safely ignore. When one gauge stops working, the problem may be in the gauge itself or a bad sensor, while all the gauges cutting out at the same time often indicates a blown fuse or a defective instrument cluster.

Is it possible to reset the warning lights on the dash?

This will result in a warning light appearing on your vehicle’s dashboard. After the repair is complete, however, it may still be necessary to reset your the computer in order for the warning light or lights to disappear. Fortunately, this process is fairly simple. Open the hood of your vehicle.

What to do if your guage is going crazy?

Check the ground cable at the frame under the driver’s seat. Clean it and make sure it is secured good. Does it work OK with the light off-? If so- could be a short in the trailer plug– or the cable that is behind the driver side– on top of the gas tank– (That is for a 5th wheel plug if the person wants to add one.)

What happens if the instrument cluster fails while driving?

If the instrument cluster fails while driving, then this will often cause the engine to cut out. If failure happens while attempting to start the vehicle then it will prevent the engine from starting.

What happens when the gauges come on a Honda Civic?

One interesting thing that I have noticed is that when the gauges come on (possibly long after the car was started), the cluster goes through the normal startup sequence. For example, the light that flashes a few times if you are due for service does its few flashes when the gauges come on.

Why does my car gauge read cold when I Turn on the ignition?

With the ignition on, the gauge should register cold. If you connect the sending unit wire to ground, the gauge should switch to read hot. If the gauge moves as expected, then you can suspect a bad sending unit. If the gauge doesn’t move when you ground out the sensor wire, then you can suspect a bad gauge.

Why are all of the gauges in my car not working?

There are a lot of different types of instrument cluster designs and configurations, but when all of the gauges in a car stop working at once, the problem is usually either a fuse or wiring problem. The first step in diagnosing this type of issue is to identify the fuse associated with the instrument cluster or gauges.

Is the speedometer not working and ABS and brake light stay?

Re: Speedometer not working and abs and brake light stay… You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert whose answer got voted for 2 times. Re: Speedometer not working and abs and brake light stay…

Why are my cluster gauges going haywire?

Having the same problem with the cluster gauges going haywire. Happens more when it is cold outside. Gas gauge won’t work, speedometer, drive, park, neutral lights don’t work, show up, gas gauge keeps going up and down. and the speedometer starts working.

Why does my airbag warning light keep coming on?

There are many different reasons that can cause your airbag light to flash or stay on. Just like troubleshooting your check engine light (get more details on how to reset check engine light here ), fixing your airbag warning light can be challenging sometimes and should never be ignored.

What does an illuminated airbag light mean?

All the same, the most important thing to know is that, an illuminated airbag light indicates a problem in the SRS system. This means that airbags might not deploy in the event of an accident.

How can I tell if my airbag sensor is working?

To determine if the sensor is working okay, first check the “Passenger Airbag Off” indicator. If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.

When do GM dashboard lights go off for no charge?

THIS BULLETIN IS BEING REVISED TO INCLUDE CERTAIN 2005 MODEL YEAR VEHICLES IN THE U.S. ADDITIONALLY, FOR U.S. 2003-2005 MODEL YEAR VEHICLES, GM WILL PROVIDE THE INSTRUMENT PANEL CLUSTER (IPC) ONLY, AT NO CHARGE TO THE CUSTOMER FOR VERIFIED FAILURES BETWEEN 70,001 MILES (110,001 KM) AND 80,000 MILES (130,000 KM).

What to do if your dash light is flickering?

CUSTOMERS ARE BEING INSTRUCTED TO CONTACT THE DEALERSHIP TO ARRANGE AN APPOINTMENT IF THEY BELIEVE THEIR VEHICLE HAS THIS CONDITION. THE CUSTOMER IS BEING ASKED TO PROVIDE THE VIN SO THE IPC CAN BE ORDERED IN ADVANCE OF THE SCHEDULED APPOINTMENT. THIS WILL ELIMINATE THE NEED TO KEEP THE VEHICLE OVERNIGHT.

What does the speedometer and fuel gauge tell you?

Speedometer: The speedometer gives information about the speed at which the car is moving. Fuel Gauge: The fuel gauge indicates the amount of fuel left in the car and how far it is from an empty tank or a full tank. Tachometer: This describes the rotation rate of the crankshaft in the engine.

What do the gauges do on a Ford?

There are gauges that help you specify the speed at which the car is running along with many indicator lights such as the check engine light or the low fuel light.

What causes the dash cluster to go out?

The dash cluster itself may also have gone out. This runs in order with a lot of wiring to other accessories, and may cause the others to fail. These connections to the instrument cluster also can come loose. You may want to check the terminals and make sure they are in good working order.

Why are the dashboard lights on my Chevy not working?

If the dashboard lights in your Chevy are dim, chances are you can fix it yourself. If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.

Why are the lights dimming on my GM Truck?

The bulb for the oil pressure is unrelated. As far as your lights dimming and going back to full bright. If your headlight switch is messed up , then there is a good chance that the dimmer switch in the headlight switch unit may be going bad.

Where is the control switch on the dashboard?

Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch.

Where are the lights on the dashboard located?

Are there dash lights on a 2012 Tahoe?

I have dash lights but no… Had the same problem with my 2012 Tahoe. No speedometer, odometer, temp, compass, or shift indicator, just dashes in place of letters or numbers. Tried first to just stop and restart but didn’t fix the problem.

Do you have a test light on the truck?

JACUSTOMER-kzmzzjqa- : Yes mileage and gear placement no show Aran : One moment Aran : Are you by the truck now? JACUSTOMER-kzmzzjqa- : No, its outside Aran : Do you have a test light? JACUSTOMER-kzmzzjqa- : No Aran : Do you have a multimeter? JACUSTOMER-kzmzzjqa- : could it be a fuse JACUSTOMER-kzmzzjqa- : No muttmeter Aran :

Are there any power gauges on my Yukon XL?

My 2003 Yukon XL (Suburban) with 5.3 motor and 70k miles has no power to any of dash gauges. The truck runs and operates fine, but the radio, heater controls and dash lights work fine. No gauge activity at all. All gauges are at the zero mark. I believe I have checked all fuses at left hand corner of dash, under dash and the under hood fuse box.

Is the odometer flickering at idle or idle?

It will also do it slowing down to a stop, but it does not do it at idle. The flickering of the odometer and parking indicator that you see is just from my camera. You cannot see the fast flickering that they are actually doing.

Why does my mileage gauge flicker so quickly?

Within the last week or so, we have been experiencing this problem. The gauges and some of the dash lights flicker quickly. The mileage and parking indicator displays also seem to sorta flicker quickly. I’ve attached a video of it in action.

Why are my dash lights flashing and gauges fluttering?

Eventually it no longer would keep the battery charged. Since replacing it its been running fine since, other than this new issue. These instrument clusters are essentially computers getting digital messages from other vehicle computers which tells what to set the needles at and which lights to light.

Gauges go off & on when 2003 Dodoge 2500 truck hits a bump. Also NOBUS light comes on. Headlights come on also.

What did the intermittent warning chime on my Speedo mean?

Most recent occurrence included an intermittent warning chime. Gauges would always jump at startup, which was no big deal, then one day while driving home my speedo started jumping around. This happened for a few days, with it always going back to normal. One day it just stopped working, and hasnt worked since.

Are there any problems with the GM gauge clusters?

The next most common problem seen on GM instrument clusters are failing digital displays. This problem is unrelated to the stepper motor problem but is often seen in the same clusters. Most GM gauge clusters of this time frame have two digital displays – the odometer and the gear indicator (commonly called the PRNDL screen).

Why are my speedometers all failing at the same time?

This problem typically starts with just one gauge but over time all the analog gauges will start displaying the same symptoms. Ultimately all gauges will fail if not repaired. Individual gauge problems are almost universally caused by failing gauge motors. Each gauge is controlled by one gauge motor called a stepper motor.

Why do I get No reading on my OBD codes?

Check your fuses to see if any have gone bad. Remember that your car or truck might have more than one fuse box. This should be covered in your owner’s manual or a proper service manual. Another reason for getting no reading is that the scan port has become clogged with dust after years of not being used.

Why does my speedo on my Harley Davidson not work?

Also heavy oil buildup on your crank sensor will cause speedo problems. I have a 2001 Road King FLHR that I bought used. It died on the way home and then two more times. When I started searching the bike for the reason I found the battery connections loose, tightened them up and problem has gone away.

How to fix a speedometer on a Harley Davidson?

FMH Reply: Michael, check out your ECM plug. Disconnect it from the ECM and blow it out with compressed air. Reassemble with electric grease. You should also do the same with your TSSM (turn signal security module) and its plug. You did not mention any modifications to this m/c. That info is usually helpful. Reply: Thanks you.

What to do if your instrument cluster shuts off?

Since electrical problems can be hard to pinpoint, consider YourMechanic, as one of our mobile technicians can come to your home or office to properly diagnose your electrical issue and help you make the necessary repairs to your vehicle. The statements expressed above are only for informational purposes and should be independently verified.

What do you do when your instrument cluster doesn’t work?

Also when you drive the car, the speedometer and the rpm gauge doesn’t move. Everything light wise works. Everything works except the rpm, speedometer, temperature and gas gauge. All fuses and relays are good. I’ve even changed the instrument cluster and the BCM. Still none of the gauges work.

What does an instrument cluster on a car do?

An instrument clusteris the collection of gauges, dials and lights right above the steering wheel that tell you what’s going on in your vehicle. Generally, your car’s instrument clusterwill last the lifetime of the car and you’ll never have a problem with any of them.

What causes the insturment cluster on a Silverado to fail?

While driving all of the gauges (speedometer, gas, voltage, fluid, etc.) simultaneously fail. Once this happens all of the indicator lights will flash on then go off and the gauges will come back to their proper level. Sometimes it will continue to do this over and over, many times in row.

How is the speedometer connected to the dash?

All other dash gauges are connected to sensors or sending units via wires, while your speedometer may utilize either a speed sensor or a physical cable. In vehicles that use cables, the speedometer is physically coupled to the transmission via a cable. The cable is usually square on both ends or square on one end and slotted on the other.

Why do fuel gauges go off on Dodge Ram?

Yes they did. However when I turn it on to cycle fuel pump none of the gauges come on although the lights do. Also the overhead computer reads all zeros including temp (blank) and the wipers don’t work right. If I turn the key on they don’t work.

When does the indicator light stop flashing on a Toyota?

The indicator light stops flashing after the ENGINE START STOP switch has been turned to ACCESSORY or IGNITION ON mode to indicate that the system has been canceled. The indicator light flashes after the key has been removed from the engine switch to indicate that the system is operating.

Why do the gauges move with the key off?

YOU CAN HAVE KEY OFF AND SOMETIMES GAUGES WILL TWITCH. JUST NOTICED THAT WITH KEY OFF IF YOU HIT THE WINDSHIELD WIPERS THAT GAUGES WILL MOVE. JEEP DEALERSHIP CAN’T FIGURE IT OUT AND NEITHER CAN MY MECHANIC. MECHANIC THINKS ITS A ELECTRIC PROBLEM? WHAT ABOUT IGNITION? OBVIOUSLY THERE MUST BE SOME JUICE GETTING TO GAUGES WITH KEY OFF.

What do you do when your steering wheel is locked?

Determine what direction you need to turn the wheel so you can feel it wanting to spring back, then go to step 2. Note: Steering wheels most often get locked when people use the steering wheel to assist them getting out of the vehicle. With that being said, the “springy” feel in the steering wheel tends to be to the left.

Why does my steering wheel lock up when I Turn on the ignition?

In general, car steering wheels lock as a safety feature on the car. For a driver to unlock his/her steering wheel, only the key needs to be inserted in the ignition. But there are times when there is some sort of faulty technical glitch, locking system issue or some other factor that prevents a driver from utilizing his/her steering wheel.

What happens if you lose power steering assist?

Also, you will lose power steering assist, air conditioning, as well as the water pump will not circulate coolant and cause the engine to overheat. Have a certified technician inspect the vehicle and correct the cause.

Why does my car lock up at high speed?

It’s a condition mechanics refer to as “sudden lock up” and is very dangerous if it occurs while you are driving at a high speed. Sudden lock up is a fatigue failure of the ignition system so if you notice anything weird about your ignition contact a mechanic as soon as you can.

What kind of problem is a lost gauge?

First instinct would be a ground problem but from your description it sounds like a Class2 data line problem and not an easy fix without some advanced knowledge and a scantool.

Why does the EGT sensor shut off without warning?

While driving, the “pull over safely now” warning indicator illuminated and the engine shut off without warning. The contact was able to manually bypass the failure. The vehicle was towed to the dealer where it was diagnosed that the egt sensor was defective and needed to be replaced. The vehicle was repaired. The manufacturer was notified.

Why are my gauges not working on my GMC Sierra?

Of course they couldn’t read it with a scanner when it wasn’t working, there was no communication on the Class2 data line. This isn’t something you’re going to fix poking and prodding, and you may even do more damage. The dealer is the best bet to diagnose this, it could by any of the dozen or so modules causing this problem or any of the wiring.

First instinct would be a ground problem but from your description it sounds like a Class2 data line problem and not an easy fix without some advanced knowledge and a scantool.

Why did my Dodge Journey engine shut off twice?

My Dodge Journey’s engine shut off twice while I was driving with no warning. No loss of lights or radio, but the engine just shuts off and car cannot be restarted. The first time I was driving on a highway, and right after accelerating from a stop at a red light the car died.

What to do if your speedometer is not working?

When the cable breaks, the gauge may not move at all, or it may jerk a little intermittently. The fix for that problem is to simply replace the speedometer cable, which involves unbolting it from the transmission, disconnecting it from the instrument cluster, and then sliding it through the firewall.

Why does my Chev Silverado have no tach?

2003 Chev Silverado. All instrument cluster gauges quit today. No speedo, tach, fuel ,temp, oil etc. Never any problem 2003 chevy: All instrument cluster gauges quit today..speedo..tach… My oil pressure, fuel, coolant temp, and battery voltage gauge don’t work. My Speedo and tach work fine. I also have a battery and abs light on.

Is the Tacho, Speedo, and temp gauge working?

Still no tacho, temp gauge or back lighting though. 1) joining pink wire to black wire gives no result/no dash lights. On a side note, joining black to blue/black makes sparks ha ha! 2) alternator warning light (I assume this is the one that looks like a battery) and the oil pressure warning light are functioning.

Why is my Tacho not working on my GU1 zd30di?

It is in a 2000 GU1 ZD30Di I have converted to TD42. The most common causes I found (from the experience of others) seem to be as below- I have checked all these and found no fault. 1.

Why are my dash lights not coming on?

1. The dash light dimmer switch works on the earth side of the dash lights. Having power in two wires indicates the dimmer switch might be faulty. Try joining the Pink wire to the Black wire. If the switch is faulty the dash lights should come on at full brightness.

When does the engine temperature warning light go out?

The symbol should briefly illuminate on your dashboard when you start the car and go out shortly after the engine has started. This is perfectly normal, but if the temperature light comes on while driving, immediate action should be taken, particularly if the symbol is red.

What causes the Check Engine light to come on?

Problem seems to cycle – driving along, suddenly the check engine light comes on along with the electronic throttle control warning light, as the temp gauge drops to zero – which triggers the Check Gauges warning light to come on. Drive more, stop a few times, ETC light goes off, temp gauge starts working again.

Why is the temperature gauge on the dashboard not working?

Thus, the temperature gauge on your dashboard is your window into the coolant temperature as seen by the temperature sending unit. It lets you know when the engine is cool, at operating temperature, overheating, or fluctuating. The sending unit is a thermistor. It is exposed on one side to engine coolant.

How does the temperature gauge work on a car?

Its operating principles remain the same: A temperature sensor that reads engine temperature, and a display to show the temperature. Thus, the temperature gauge on your dashboard is your window into the coolant temperature as seen by the temperature sending unit.

What does it mean when your temperature gauge is too low?

Unfortunately, when the temperature gauge reads too low, too high or fluctuates, you don’t know whether something is wrong with the engine, the gauge, or something else. Unless the gauge is in the red zone and you see steam coming out from under the hood, of course.

What to do when your gauges go crazy?

Retouch them with a soldering iron even if you can’t see cracks. They can be tiny. One way to detect them is to smack the dash above the cluster next time they go crazy. If they straighten up then get the soldering iron out.

Why are all the gauges shooting up and down?

All gauges in dashboard shooting up/down like crazy and all indicator lights turn on! Yesterday my wife complained that the gauges on the dashboard are suddenly shooting up and down like crazy, and also all the indicator lights, abs, coolant, door indicators, etc. light up when this happens.

What to do when your car gauges are not working?

The fuse should have power on both sides when the ignition key is turned to the on position. You can check this with an inexpensive test light or multimeter, or take your car to a mechanic if you don’t have the right tools or aren’t comfortable digging into a diagnostic like this.

What will cause all of your gauges drop to zero while driving?

What will cause all of your gauges drop to zero while driving. When I am driving my car my service vehicle will come on and all of my gauges will drop to zero,temp.gauge,oil pressure,fuel gauge,battery gauge and RPM gauge sometimes they will stay at zero and sometimes they will copme back up, and may do it several times.

What does it mean when your dash lights go out?

My ’05 also did that a couple of times, driving down the road and the dash lights go out for several seconds, also no gauges, then pop right back on. Also, started it one night, all dash lights are flashing, seatbelt/door chime chiming away furiously, no gauges.

Why are my fuel gauges always on and off?

Over time the vibrations from the road may have worn a hole in the insulation of one such wire. As you drive, the exposed copper is grounding to the chassis, making the gauges do their little on/off dance. If that’s not the case, you’re looking at having to replace the cluster.

Why does my radio cut out and dash lights flash?

Yesterday, several times, my radio cuts out and several dash lights flashed and my needles dropped to the bottom on the gauges. I did not lose engine power – car felt the same.

How can I Fix my Ford gauge cluster?

Also, red. I bought an led kit. Pulled the dash, unscrewed the cluster, left the two giant harnesses plugged in, unhooked the gear position needle and flipped that cluster up on the dash to have at it….bad move.

Why is the gauge cluster on the dash?

Pulled the dash, unscrewed the cluster, left the two giant harnesses plugged in, unhooked the gear position needle and flipped that cluster up on the dash to have at it….bad move. My theories; either i broke a foil on the pcb by applying tension to the harnesses i left plugged in, or the burnt out bulbs were burntout for a reason.

Why do the gauge lights stay on when the truck is parked?

Gauge lights stay on after truck is parked happens intermittently no reason.Thought I had bumped interior/dash dimmer switch.Out side cargo dome not on only tach and speedo. Had gauges go dim while driving 3 weeks ago could not brighten had to turn ignition on and off then everything back to normal.

What should I do if my dash cam is not working?

Solution: There is no known solution to this problem. Trying different firmware might help. Reason: Lens need adjustment, wrong exposure values. Solution: Adjust the camera so that you have about 1/3 sky and 2/3 land on the screen, even if it means that you have the car hood in view.

What to do if your oil level sensor is beeping?

Oil low indicator – Check your oil reservoir levels and make sure they are topped up. If they are topped up, while the beeping is going on you can try removing the blue wire from the oil reservoir cap. Now if this stops the beeping, then the problem could either be that the oil level sensor is bad or the level of oil is too low.

Why does my dashcam keep beeping while driving?

Try turning that function off to see if the beeps go away. The Roav doesn’t have lane departure warning. I wonder if the beeps are triggered by the shock sensor, which I understand is quite touchy. Try turning that function off to see if the beeps go away. Click to expand…

What should I do if my gauges are not working?

The first step in diagnosing this type of issue is to identify the fuse associated with the instrument cluster or gauges. The fuse should have power on both sides when the ignition key is turned to the on position.

Why are the warning lights on my car not working?

One or more dashboard warning lights don’t work. If one or more warning lights fail to illuminate when you first turn the key on, it usually indicates a blown bulb. If none of the lights come on at all, check the fuses and wiring to the instrument cluster first.

What to do if your dash gauges keep flickering?

The gauges: work sometimes, and other times they don’t…and not all at the same time. Banging on the dash doesn’t help, wiggling the battery cables doesn’t help (new battery), tilting the up and down doesn’t help.

What happens when your gas gauge is not working?

The gas gauge tells you how much fuel is in your gas tank and alerts you when it’s time to refuel. If your gas gauge is not working, the inaccurate information it provides may cause you to run out of gas unexpectedly.

What are the warning lights on a Dodge?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Dodge. Click a link to learn more about each one.

How can I check the voltage on my Street Glide?

Pull the headlight out and hook it to a battery charger. Clamp the negative leed and touch the positive leed and if it’s good it will light up. If it lights up it will do so on low beam. You need to check your charging/ output voltage with a Multimeter-as already mentioned by Bowden.

What’s the voltage reading on a Harley Davidson?

Question: is the fluctuation to 13v at freeway speeds the regulator cutting back the voltage with the battery now fully charged at freeway speed/rpm and recharging at the 14.5-14.7 when on streets or…..? Thanks again for such a great site!

Why does my voltage guage only show 9-10 volts?

My voltage guage usually points near the red mark at 9-10 volts. Batteries cranks the starter quickly and it does not seem to lack any electric power. Some times driving, it will raise to about 12 V, but never above, and the next minut point at 9 again.

How to troubleshoot a daytime running lights problem?

Use a Phillips screwdriver to remove the light assembly. Place all of the screws in a safe place so that none of them are lost. Tug on the electrical connector at the rear of the assembly. If the connector comes out or is loose, plug it securely into the rear of the assembly.

What to do if your dash gauges are not working?

You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert that has 1 follower. An expert whose answer got voted for 2 times. Pull out and re-set the DIC fuse. It’s i the fuse box under the hood. This solution worked for me.Kind of funny the DIC was still working but all the guages weren’t.

Why do my car gauges turn off and on?

Now the gauges turn off and on, is says damaged keys. Window wont come up, says pass door is open. Headlights flicker, turn signals dont work, inside lights come on and off, and now push start wont work. I can work on the mechanical but don’t know much on the electrical.

Why does my Ford gauge cluster stop working?

I am assuming the cluster is never the issue in the condition it continues to work koeo and you flexed the board, and it never stopped working in those conditions. If it is dead while running, voltage is killing it or THE CHEAPEST EASIEST FIX EVER IS NEEDED. read the next trouble maker.

When do all the dash lights come on?

All the dash lights come on and gauges drop to 0, then the light go off gauges go back to normal, it can do it ones or sometime it does it 3, 4 time in a row My car has 106000 miles. My car has an automatic transmission.

When does the dash light come on on a Chrysler 300?

Reference Number (s): 08-049-06, Date of Issue: December 05, 2006 CHRYSLER: 2006 – 2007 (LX) 300, Magnum, Charger GROUP: Electrical SUBJECT Instrument Cluster Resets If Driver Exits Vehicle With The Engine Running Or Ignition In The Run Position.

Is it fun to drive with headlites flashing?

Its fun in the dark driving down the road with the headlites flashing people actually pull over and let me by. Oh and on a side note if the truck is plugged in and the block kept warm this does not happen.

What to do if your dashboard light does not work?

A blown fuse can disable the vehicle’s dashboard light. The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.

What are the symptoms of an instrument cluster failure?

Common Failure symptoms: Loss of all instrument cluster functions and lights. Speedometer, temperature and rev counter drops to zero. Engine cuts out while driving. Non start. Immobiliser light flashes.

What are the symptoms of a 6.7 Cummins Engine?

Symptoms that indicate the Dodge, Ram 6.7 diesel particulate filter is clogged include: One of the main symptoms you may notice is power loss on the 6.7 Cummins with a clogged DPF. If exhaust gases can’t escape efficiently you’ll have a build up in pressure.

Why does the dash gauge switch from battery to alternator?

OK now that is starting to make sense. If the dash gauge switches over from reading battery voltage to alternator voltage after the engine starts, and there’s a diode between the alt. output and the battery, it would explain a lot. I will take readings at the alternator and let you know what I find.

What are the symptoms of a bad ECM power relay?

A bad relay may cause the vehicle to crank, but not start, or sometimes not even crank at all. 3. Battery drain or dead battery. A failed ECM power relay can also cause a battery drain or dead battery. If the relay shorts it can leave power on to the computer, even when the vehicle is turned off.

What are the signs on the dashboard of a car?

This list covers general symbols that appear in the most common car models. 1. Engine/Check Engine Warning Light 2. Service Engine Soon Warning Light 3. Battery / Alternator Charging Warning Sign 4. ABS / Brake Control Warning Light 5. Airbag/SRS Warning Dashboard Light 6. Washer Fluid Level Warning Sign 7.

Why does the gas gauge drop when the car is idle?

When the car is filled up, the gauge registers properly, but when the tank is at least a 1/2 tank or less, when sitting idle the gauge will drop down to empty. We figured it was an electronic float sensor issue but after seeing this I’m not sure. As far as we know we do not have any other dashboard issues.

What happens when all dash lights come on?

While driving all dash… While driving all dash lights come on and gauges do not work. Alternator is fine This has happened twice so far. while driving all of a sudden all dash lights go on and the gauges stop working (the fuel gauge goes to E, etc.).

What causes the odometer gauge to drop off?

All of the gauges will momentarily drop to the off position and the fluorescent display could change from temperature or trip mileage to the odometer mileage. If a customer indicates that the symptoms have occurred, perform the Repair Procedure.

How to test the mileage of a car?

1. Test voltage backprobed at the Instrument Panel Cluster (IPC) powers and ground. May use a headlight at disconnected IPC connector Key On, Engine Off (KOEO) to load the powers and grounds, then test voltage with a meter. 2. Replace the Instrument Panel Cluster (IPC). Must be programmed and calibrated. Ok thanks for your help!

Why are the lights on my dash not working?

Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.

How many miles to go when low fuel light comes on?

That’s where this handy chart from Your Mechanic comes in. The table, shared in a post on the company’s website, lists America’s 50 most popular models, based on purchasing data from 2015. According to the chart, you could have anywhere between 25 and 114 miles to go when that low fuel light comes on.

How can i dim the lights on my dashboard?

Begin the process by trying the simplest of solutions first. Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch.

Why are the lights on my dashboard not working?

Adjust the dial or knob to see if that fixes the problem. If the switch was accidentally bumped, your dashboard lights might have been turned off. Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb.

What should I do if my gas gauge stops working?

Gas gauge, almost empty. Water temp, cold. No oil pressure. The alt wasn’t charging. No tac and no speedometer. The Lights work fine, The odometer is still rollin over, cruise control works, Gear selection indicator read out works fine.. Any ideas?

What happens to the gas gauge when the blower turns off?

Randomly the dashboard will have all the idiot lights light up while the gas gauge, speed, rpm and temp gauge drop to empty, 0, 0 and cold. If the heater is on the blower turns off.

Why are my fuel gauge bulbs burnt out?

The temerature outside did not matter (30f-100f) At first dash slapping worked, then it didn’t. How it all started. So, i had 239,000 miles on her. Bulbs were burnt out in the cluster to key gauges (fuel level, mph, etc…) and i wanted them to be on and better.

Why do I have trouble shooting my gauge cluster?

I have been trouble shooting my instrument cluster for months! My gauge cluster, windows, radio would all come and go as they pleased for any amount of time you can think of. Seconds, minutes or days. It would happen in every circumstance you can think of; key on engine off, engine running at idle, left turn, right turn, braking, or accelorating.

How to fix Ford Power Stroke gauge cluster?

So you keep blowing fuse (#43?) And the tow trailer overdrive deal is acting up… On the steering column, underneath, there is a hole to release the ignition core. Insert key and turn to run (may want to unhook negative battery cables before hand) and insert a philips screwdriver into hole under column.

Why are the gauges on the dashboard important?

CHECK ALL THAT APPLY. The gauges on a vehicle’s dashboard is very crucial, mainly because it both displays and conveys various meanings using a variety of gauges. These gauges also show us when a problem exists. If we know what they’re telling us, the gauges can also let us know before a problem occurs.

What is the purpose of the RPM gauge?

RPM gauge….what is it’s purpose. It is an engine management system, and monitors the engine on levels that a full set of gauges cannot give to a driver. But, it doesn’t always set a trouble code or warn the driver of problems developing with the engine. It doesn’t monitor the oil pressure, fuel pressure system,…

Why do my gauges sweep to Max and back when I start my truck?

09 and newer trucks do this everytime at startup while 08 and older (not sure of how old but wanting to say 97) do this on two conditions. 1. Bad battery or alternator. 2. You’ve entered the dealer ic test mode (some call it engineering test mode). It’s purpose is for the gauges to find their min and max points of their ranges.

Why does my car gauge move up and down when I start the car?

I don’t think that the battery was on the way out. On the other hand, when this happened in the 2000 Ford Windstar I once owned, this was an indication of a battery problem. Actually on most newer cars you can make this happen by holding down the button that resets the trip counter when turning on the ignition.

Why do the needles on the fuel gauge go up and down?

I noticed that during the last few days, when I start the car, the needles on the fuel, speedometer and temperature gauges go all the way up and then back down. After they finish moving, I then see the engine lights go on and off. Normally, when I start the car, just the engine lights go on and off. The movement of the needles on the gauges is new.

Why does the instrument cluster shut off intermittently while driving?

The batt light goes on and the entire instrument cluster (spedo fuel turbo temp etc ) shuts off .. when it’s off the climate control won’t work and the sun roof won’t work . Sometimes the abs light comes on before it shuts off. Turns on and off intermittently. I’ve checked fuses and cleaned battery connections and ground connections .. please help

What does it mean when your gauges go crazy?

YOU MAY GO BACK LATER AND IT WILL START. GAUGES GO CRAZY. WILL COME ON. ODOMETER AND CLOCK WILL FLASH. SOMETIMES SPEEDOMETER WILL GO FROM 60 TO ZERO AND BACK. WILL NOT LOSE POWER THOUGH. YOU CAN HAVE KEY OFF AND SOMETIMES GAUGES WILL TWITCH.

Why is it when driving the RPM gauge drops or jumps up?

Somewhere the fuel drop then suddenly rpm decrease better check the complete fuel system from tank to injectors also check the rpm sensor . Was this answer helpful? This could possibly be your output speed sensor, related to the transmission.

Why does my Jeep gauges go crazy with the key off?

JUST NOTICED THAT WITH KEY OFF IF YOU HIT THE WINDSHIELD WIPERS THAT GAUGES WILL MOVE. JEEP DEALERSHIP CAN’T FIGURE IT OUT AND NEITHER CAN MY MECHANIC. MECHANIC THINKS ITS A ELECTRIC PROBLEM? WHAT ABOUT IGNITION? OBVIOUSLY THERE MUST BE SOME JUICE GETTING TO GAUGES WITH KEY OFF. ALSO, JEEP IS IN WON’T START MODE NOW.

Why does the battery light come up on low rpm?

The Battery light on the dash used to light up as the car used to idle. (The idling rpm is not abnormally low) . On giving some accelerator, the light used to go off. Its worse with the headlamps on. In case of no accelerator, the car used to stall. I think its a faulty alternator not charging up on low rpms. Gurus pls advice on the fault.

When does the battery warning light come on?

May 25, 2016. The battery light or charging warning light, available on the dashboard of your car, indicates malfunctioning or poor charging of the battery. This light illuminates whenever the charging system does not charge the battery with a voltage above approximately 13.5 volts.

How to troubleshoot intermittent Battery Light issue in..?

The easiest what to check for this is to have a helper in the driver’s seat, engine running, then you go through and move wires associated with the charging system around a little bit and see if you can get the light to come on. Like I said, a long shot, but about the only other thing you could check.

What happens when there is no battery light?

The Alternator cut-in speed is increased if there is no warning light on when in the ignition position Is the warning light coming on as it should with ignition on and no engine running ? Charging light is battery backed.

What’s the voltage of a car battery when it is shut off?

13.2V when car is shut off after running for a while (key in off position no lights etc.) These measurements were taken on both the battery itself and the terminal connections and were consistent; there is no visible battery corrosion.

Is the battery light on but battery charging OK?

Going nuts – Battery light on but battery charging OK. The battery light is on but the voltmeter says 13.5 to 14.5 volts depending on the engine revs. When engine is off the volts drop to about 12.

Why does my battery have intermittent starting difficulty?

If the battery has an intermittent inter-cell connector problem, the voltage will drop to very close to zero yet if the key is released the voltage will mysteriously go to nearly a full charge condition or whatever it was when the ground cable was reattached as mentioned earlier. I hope this is helpful.

Randomly the dashboard will have all the idiot lights light up while the gas gauge, speed, rpm and temp gauge drop to empty, 0, 0 and cold. If the heater is on the blower turns off.

Can a new gas cap turn off the Check Engine light?

Searching the internet will turn up tons of results saying that a new gas cap will turn your check engine light off. The reality is, it won’t do a thing if your check engine light is on because you need a new O2 sensor (or any other problem).

When to call a mechanic for a bad gas pedal sensor?

If any of these symptoms occur or your car isn’t responding accurately when you press the gas pedal, you should pull over immediately and call a mechanic. Here is a more detailed list of the most common symptoms of a bad accelerator pedal position sensor.

Why does my car not respond when I press the gas pedal?

You may not be noticing a delayed response from the pedal, but if you see low gas mileage, it could mean that the car’s throttle position sensor is working but not as accurate as it should be. Modern cars have a monitoring system over all the sensors in the car engine.

What should you do when your brake warning light comes on?

Vehicles with ABS brakes have two warning lights — one for ABS system malfunctions and one for mechanical problems. If one of the brake system warning lights come on, it can be a relatively minor problem or a major safety issue. Regardless of which brake light is illuminated, always check your car over before continuing to use your car.

What happens if your brake light is burnt out?

If there are no other brake lights on, your car is safe to drive and your problem has been solved. On some vehicles, if a brake light is burnt out, a warning message for that bulb will be displayed on the dash.

What happens when your abs and brake light is on?

An illuminated ABS or BRAKE light is not only a minor annoyance but can affect resale and trade-in value, as well as raise a few eyebrows when it comes time to get the vehicle inspected. (State laws may vary) With a keen eye and a DIY approach, most ABS and brake system repairs can be done at home.

What does it mean when your brake warning light comes on?

What’s the best time in the 100 meter dash?

100 meter Dash – M 60 – 64 100 meter Dash – M 65 – 69 100 meter Dash – M 70 – 74 100 meter Dash – M 75 – 79 100 meter Dash – M 80 – 84

What’s the secret to the Ford Focus dashboard?

1. To enter the instrument cluster self-diagnostic mode simultaneously depress and hold the tripmeter reset button then turn the ignition switch to position II or III. 2. Release the tripmeter reset button when TEST is displayed on the LCD. This will take between 5 and 8 seconds. 3. The instrument cluster will enter the gauge sweep test. 4.

How long does it take to ship a Ford F250 dash cover?

Usually ships within 1 to 3 weeks. . Usually ships within 3 to 5 weeks. . . Only 1 left in stock – order soon. . Usually ships within 3 to 5 weeks. . . . . . Usually ships within 3 to 5 weeks.

What does h and L mean in Ford Focus?

(H = Ignition, L = Ground or over-charging). #. (Crank sense it the Pos I (Accessory) supply to the cluster. If this is missing then the cluster will remain dead for about 20 seconds after key on. Then it will function normally.

Why is the headliner on my car sagging?

It could be an old car, poor maintenance, or that long trip you took in the sunny (aka HOT) southern California. Yes, overheating, just like lack of upkeep and dampness, can make the fabric slump by dissolving the glue that holds it to the roof frame. Is there any way to avoid these hassles? How to fix sagging headliner without removing?

What to do if your headliner is coming off?

Pin it down. It’s another quick fix that won’t require much time and money. The method is quite effective and you can push back the headliner to its place even if half of it is coming off. Use sequin pins or anything that serves your purpose. Push the pins through the fabric to the foam backing board.

How to fix sagging headliner in car without removing?

To fix headliner in car without removing, you have to apply a special headlining adhesive because the ordinary glue will be of no use. A spray can adhesive is likely to be the best solution to apply and distribute the glue evenly. 2.

What does a headliner do on a car?

A headliner, or headlining, is a fabric that is secured to the roof framing. It gives the car’s roof a smooth texture, absorbs noises, and keep a pleasing interior temperature by buffering the outside cold and heat.

What kind of pin do you use to make a headliner?

Use sequin pins or anything that serves your purpose. Push the pins through the fabric to the foam backing board. You can arrange the pins in a pattern to make the headliner looking visually pleasing. 3. Clear-headed Twist Pin

Why is my speedometer, rpm gauge and fuel gauge not working?

Q: My speedometer, rpm gauge and fuel gauge are not working; possible gear slipping and high rpm. I recently had a used motor put in my vehicle about 6 months ago when there was an oil build up which is commin in this engine i guess, and a new starter about 6 weeks ago.

Is the temp gauge on my Car working?

As stated in the thread title, my dash backlighting, speedo, tacho, and temp gauge are not working. However all of the warning lights and high beam indicator light work. The problem has me stumped, I have searched and searched here but haven’t found an answer yet.

What makes my car voltage gauge read low?

As a vehicle slows, engine/generator RPM slows and the current (amperage) output of the generator may not be sufficient to supply the loads, the vehicle system voltage will drop and the lights will dim. Dimming of the lights is an indication that current is being pulled from the battery.

Why does my car not start when I Turn on the lights?

If it accepts a charge or a jump from another battery and the vehicle starts, then the problem is solved. If it doesn’t start, it may be a blown fuse, a broken ignition switch, or a bad starter. If the battery is in good shape, check for a blown fuse or fusible link.

Why does my check engine light not come on?

The dome light did NOT come on when the door was open. I turned it on with the switch. The check engine light went off immediately after I turned the key to start. Yesterday it stayed on. When starting, the dome light flickered (I had turned it on manually today) , as it should.

Why does my gas gauge drop to empty?

About 5 years ago, my gas gauge started acting up on my 2002 Pontiac Montana van. The gauge dropped to empty although I knew I had gas in the vehicle. When the car is filled up, the gauge registers properly, but when the tank is at least a 1/2 tank or less, when sitting idle the gauge will drop down to empty.

Why are dashboard lights important in a car?

Vehicle dashboard lights assist the driver in monitoring the various gauges of their car. These important lights include the speedometer, the fuel and temperature gauges among others. Having these lights work properly is particularly useful when driving at night.

What to do if your dashboard light is not working?

Switch on your car and check to see whether your dashboard lights are working properly. If the dashboard lights are still not illuminating or if you donâ€™t feel comfortable attempting this process, enlist the services of a certified mechanic to replace any blown fuses and replace the light bulbs for you.

How do you remove a bulb from a Dashboard Light?

Step 3: Remove the gauge cluster. Unplug the multiple electrical connectors that attach the gauge cluster to the wiring harness. Take care to disconnect all connectors and then remove it completely from the dashboard. Step 4: Remove the bulb socket.

What does it mean when your airbag warning light is on?

Airbag Warning Light – Depending on your car, the airbag warning light might also be called the SRS light. This light basically covers the inside safety system of your car. If the SRS or airbag warning light is on, this means something is wrong with the system.

What does it mean when the engine warning light comes on?

Engine Warning Light – This is the symbol that most of us see light up that means there are problems with your car. The thing with this symbol is that it can mean a lot of things. When the Engine Warning Light goes on, it is usually accompanied by different symptoms.

When do dash lights come on and gauges drop to zero?