How do you program a 2007 Chevy Silverado?
How do you program a 2007 Chevy Silverado?
PRESS and HOLD the Trip Odometer Reset Button for 3 seconds until “REMOTE KEY LEARNING ACTIVE” displays. Vehicle is now in Programming Mode. PRESS and HOLD LOCK and UNLOCK buttons at the same time on the first remote for 15 seconds. The vehicle will emit a sound indicating successful programming of the remote.
How to program a Chevrolet Silverado remote key fob 2007?
An easy to follow video on how to program a remote key fob for a 2007 – 2010 Chevrolet Silverado. 1. Insert Key and turn to ON position so you can access Driver Information Center 2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays 4.
Where is the remote learning button on a Chevy Silverado?
Switch ignition ON. Repeatedly press vehicle information button (it is usually located on the right or left from the steering column depending on year make and model) until PRESS TO RELEARN remote is displayed. Press set/reset button until remote key LEARNING ACTIVE is displayed.
How do you program Homelink on a Chevy Silverado?
Enter your vehicle, and then immediately press and hold the button on your rear view mirror that you programmed in Step 2. You will need to hold down the button for several seconds. The lights on your truck and garage door opener will both flash once the process is complete. Figure 1.
Where can I get a 2007 Chevy Silverado owner manual?
Canadian Owners A French language copy of this manual can be obtained from your dealer/retailer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 Litho in U.S.A. Part No. 25817255 A Second Printing©2006 General Motors Corporation. All Rights Reserved. 3 How to Use This Manual
An easy to follow video on how to program a remote key fob for a 2007 – 2010 Chevrolet Silverado. 1. Insert Key and turn to ON position so you can access Driver Information Center 2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays 4.
How to enter programming mode on a Chevy Silverado?
1 Close All Doors CLOSE all doors. 2 Enter Programming Mode – Step 1 INSERT key into the Ignition (DO NOT TURN). 3 Enter Programming Mode – Step 2 PRESS and HOLD the power UNLOCK button on the Driver’s side door.
What’s the exit button on a Chevy Silverado?
REPEAT Step 7 for any additional remotes to be programmed, including existing ones. SCROLL until “EXIT” appears on the display. PRESS the DISP button to EXIT Programming.
Where is the power unlock button on a Chevy Silverado?
PRESS and HOLD the power UNLOCK button on driver’s side door panel. DO NOT release until instructed to do so in Step 5. Quickly TURN the Ignition ON, OFF, ON, OFF. (ON is the position just shy of starting your vehicle, OFF is the position where you can remove your key) RELEASE the power UNLOCK button on the Driver’s side door panel.
