When do you turn off the courtesy lamp?
When do you turn off the courtesy lamp?
The courtesy lamps will remain ON, approximately 15 seconds after the door is closed. The BCM will then turn them OFF through the theater dimming feature. If the door locks are activated to the LOCK position, or if the ignition switch is turned to either the RUN or CRANK position the courtesy lamps will turn off immediately.
Where are the courtesy lights on a GMC?
The left and right front door courtesy lamps are controlled, and receive voltage and ground from the drivers door module (DDM) and the passenger door module (PDM) respectively. The body control module (BCM), DDM, and the PDM communicate through class 2 serial data for the lamp illumination commands and the door ajar switches.
Where is the dome lamp control on a Honda Accord?
This control is located on the instrument panel, to the left of the steering column. (Instrument Panel Brightness): Turn clockwise or counterclockwise to brighten or dim the lights. There are front and rear dome lamps. The dome lamp controls are located in the overhead console.
How do you turn on a dome lamp?
(On): Turns the dome lamps on. The dome lamps can also be turned on and off by pressing the buttons next to the lamps. The reading lamps are located on the overhead console. These lamps come on automatically when any door is opened. For manual operation, press the button next to each lamp to turn it on or off.
The courtesy lamps will remain ON, approximately 15 seconds after the door is closed. The BCM will then turn them OFF through the theater dimming feature. If the door locks are activated to the LOCK position, or if the ignition switch is turned to either the RUN or CRANK position the courtesy lamps will turn off immediately.
The left and right front door courtesy lamps are controlled, and receive voltage and ground from the drivers door module (DDM) and the passenger door module (PDM) respectively. The body control module (BCM), DDM, and the PDM communicate through class 2 serial data for the lamp illumination commands and the door ajar switches.
Where are the ground lamps on a GMC?
Ground is provided to the footwell lamps and all courtesy/reading lamps at G203. Ground is provided to the right middle and right rear door at G306. Ground is provided to the left middle and left rear door at G302. When the driver uses the door key in order to unlock the doors, the BCM receives a door unlock signal.
How do you turn off the interior lights in a GMC?
When the driver uses the door key in order to unlock the doors, the BCM receives a door unlock signal. The BCM must have inputs that indicate that the ignition switch is OFF, the courtesy lamp switch is OFF and all the doors are closed. The BCM will then activate the interior lamps.
