How to change the wheel bearing on a 2002 GMC Sierra?
How to change the wheel bearing on a 2002 GMC Sierra?
How Do I Change the Wheel Bearing on My 2002 GMC Sierra 1500 Truck? The wheel bearings in your 2002 GMC Sierra are housed in a sealed hub and bearing assembly. The bearings in this truck are not serviceable and must be replace with the hub and bearing assembly as a unit.
How to replace front wheel bearing Assy on 3500srw?
The wire goes UNDER the tab on the dust shield. Tighten down the axle nut and washer on the axle. Tap the dust cover back on with the handle of the hammer. Replace the rotor. Hold the brake pads apart with your fingers and slide the brake assy onto the rotor. Use loctite and reinstall the two 21mm bolts. Do I know the torques? Uh… REAL tight?
Do you need to replace wheel bearings on a Chevy Silverado?
Replacing the wheel bearings is a bit of a tedious process, but definitely important for the well being of your truck. This article applies to the Chevrolet Silverado 1500 (2007-2013). Unless you’ve replaced a wheel hub bearing yourself, chances are you’ve never actually seen one.
Where is the hub bearing on a Chevy Silverado?
Unless you’ve replaced a wheel hub bearing yourself, chances are you’ve never actually seen one. The wheel hub bearing is buried deep inside the wheel assembly of your Silverado, and it plays a big role in safety, but primarily handling and road-worthiness.
How do you change the wheel bearing on a GMC Sierra?
Remove the axle nut in the center of the hub — on four-wheel-drive models only — using a 36 mm socket and ratchet. Unplug ABS sensor wiring from the back of the hub assembly. Remove the three 15 mm hub and bearing assembly bolts from the back of the steering knuckle. Slide the hub assembly out of the steering knuckle.
The wire goes UNDER the tab on the dust shield. Tighten down the axle nut and washer on the axle. Tap the dust cover back on with the handle of the hammer. Replace the rotor. Hold the brake pads apart with your fingers and slide the brake assy onto the rotor. Use loctite and reinstall the two 21mm bolts. Do I know the torques? Uh… REAL tight?
How do you remove a wheel bearing from a truck?
Raise and support the side of the truck that has the faulty wheel bearing using a floor jack and jack stands. Remove the wheel using a lug wrench. Remove the two 15 mm brake caliper bolts that attach the caliper assembly to the steering knuckle, using a socket and ratchet.
What is the GM front wheel bearing Assy number?
You can drive pretty far worn bearings without fear of the wheel departing the truck due to the captive design of the unit. This is a sealed bearing assy that includes the hub, lug bolts, bearings, axle spline, wheel speed sensor, and cable. GM has recently updated the part number to #15225770 or AC Delco #FW289.
