How do you reset the tire pressure sensor on a GMC?
How do you reset the tire pressure sensor on a GMC?
Starting with the vehicle off, turn your key to the “On” position, but don’t start the vehicle. Find the TPMS reset button (check your manual if you need help), and hold it until the tire pressure light blinks three times. Then, start the car and wait 20 minutes for the tire pressure light to reset.
Where is the tire pressure sensor on a GM car?
GM’s tire pressure monitor employs a sensor inside each tire’s valve stem. Reset each tire sensor light when you change tires or your tire pressure gets too low, causing the “TPMS” light to come on.
What’s the low tire pressure warning light on a GMC Sierra?
It was a beefed-up version of the lightweight Silverado / Sierra and was available in the 1500HD, 2500HD, and 3500HD models. If you replacing a spare tire with a road tire containing the TPMS sensor on your GMC Sierra 1500, the system will detect a malfunction and the low tire pressure warning light will blink.
What to do if your GMC tire pressure is low?
If your tire pressure ever falls more than 25 percent below the manufacturer’s recommendations, a light and a Driver Information Center (DIC) message in the instrument panel will remind you to take action. If your vehicle was made before 2007, you can still take measures to help ensure your GMC’s tires are performing as they should be.
How to reset TPMS tire pressure monitoring system?
Also, you need a TPMS Relearn Tool to reset the Tire Pressure Monitoring System. Here’s how to do it: Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
GM’s tire pressure monitor employs a sensor inside each tire’s valve stem. Reset each tire sensor light when you change tires or your tire pressure gets too low, causing the “TPMS” light to come on.
It was a beefed-up version of the lightweight Silverado / Sierra and was available in the 1500HD, 2500HD, and 3500HD models. If you replacing a spare tire with a road tire containing the TPMS sensor on your GMC Sierra 1500, the system will detect a malfunction and the low tire pressure warning light will blink.
If your tire pressure ever falls more than 25 percent below the manufacturer’s recommendations, a light and a Driver Information Center (DIC) message in the instrument panel will remind you to take action. If your vehicle was made before 2007, you can still take measures to help ensure your GMC’s tires are performing as they should be.
Also, you need a TPMS Relearn Tool to reset the Tire Pressure Monitoring System. Here’s how to do it: Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
