How to replace rear axle seal on Chevy 2500 HD?

In this video The Disgruntled Mechanic replaces the rear axle seal on a four wheel drive with a AAM 1150 14 BOLT GM 11.5″ REAR in a 2002 Chevrolet 2500HD with the 6.6 Liter Duramax diesel engine with an Allison 1000 transmission . Should be fun! Haven’t done one in awhile! MUSIC: http://www.bensound.com/royalty-free-

How to remove rear axle shafts with locking differential?

On axles WITH a locking differential, keep the pinion shaft partially withdrawn. 16. On axles WITH a locking differential, place the C-lock (1) on the axle shaft (3) so that the ends are flush with the thrust block (2) (Illistation # 8).

How does Tow / Haul mode work on a Silverado?

When the system detects that a trailer is hooked up to your Silverado, this feature can remind you to engage Tow/Haul mode, which improves acceleration while hauling a heavy load. This available feature checks the pressure and temperature of the air inside of up to four trailer tires to help detect potential blowouts.

What kind of transmission does a Chevy Silverado have?

A mountain rescue volunteer explains why the capability of Silverado is essential every day. 8-speed automatic transmission (LT Trail Boss and High Country 4×4 include 10-speed automatic transmission)

Is there a leak in the rear axle seal?

To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: djrRZ1AI5O2dSboj) An error occurred while retrieving sharing information. Please try again later.

When to know if your transmission seal is leaking?

If you start to notice oil drops on your driveway, it could be a sign of a leaking axle seal. Transmission slipping at highway speeds. While an oil spot on the driveway is a common sign, it does not always happen because the axle seal leaks more during highway driving. Instead, you may notice your transmission slipping at highway speeds.

How much does it cost to replace an axle seal?

$107.33 – $1,033.10. Price range for all vehicles. Average rating from 65 customers who received a Axle Shaft Seal Replacement. An axle seal is the part of the vehicle that connects the axle to the rear differential, or the transmission. The purpose of the axle seal is to keep transmission fluid from leaking.

Where to find the rear axle assembly on a Chevy Silverado?

To find your Chevrolet Silverado 2500 Pickup Rear Axle Assembly from a RECYCLER NEAR YOU, just enter the YEAR of your vehicle and your ZIP code in the above form and press the “FIND” button.

How to rebuild a GM 8.5 rear axle 10 bolt Chevy?

If playback doesn’t begin shortly, try restarting your device. I post great videos of automobile builds, “How-to’s”, Car Show footage, ride-alongs and more!

How to remove rear rotors on Silverado 3500HD?

We tried to find a service manual for the truck (2008 Chevrolet Silverado 3500HD 6.6L duramax diesel dually) with no luck. ANY help on removing the rotors to be replaced OR finding a service manual for the truck would help so much!

What kind of rear axle does a Silverado 2500 have?

There are 8 choices for the 2004 Chevrolet Silverado 2500 HD Rear Axle Assembly !!! 4-7 Days Delivery! This is an original used OEM Rear Axle Assembly that’s guaranteed to fit a 2004 Chevrolet Silverado 2500 HD with the applicable vehicle manufacturer’s specifications (). SEMI-FLOATING AXLE, 4.10 RATIO (OPT GT5)

How much does a rear axle assembly cost?

There are 8 choices for the 2004 Chevrolet Silverado 2500 HD Rear Axle Assembly !!! Buy in monthly payments with Affirm on orders over $50. Learn more Have a question?

How to replace a CV axle in 20 minutes?

HOW TO REPLACE A CV AXLE IN 20 MINUTES! – Chevrolet Silverado 2500 HD 2000-2007 – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

How to replace rear axle seal on GMC Terrain?

Just like 24882 shows in his pic in post #8, much less components to deal with. You will need a socket to remove the axle nut, a three bolt puller if the splines on the axle are frozen in the wheel hub, and a “suitable tool” to coax the axle out of the diff assembly.

What kind of sealer is used for rear axle bearings?

Most seals have a sealer allied to them as a thin coating, this seal uses an orange colored sealer. Next, you can use the seal installer which is one and the same to the bearing installer but we thought we would show you how we did it in the old days in this example.

What should I do if my rear axle seal is leaking?

If gear oil doesn’t start to leak you should help break the seal loose by using a flat blade (standard) screwdriver and allow the gear oil to drain out. Once most of the gear oil has drained into the catch basin, remove the remaining three bolts to remove the cover. Use a large screw driver to continue releasing the seal.

How do you replace rear axle seal on GMC Sierra?

Pull the clip out (you’ll need to push the axle in a little to get it out). Then you can pull the whole axle shaft out. Your seal will be in the end of the axle tube. Pop that out being careful not to damage the bearing. Now inspect the bearing for any damage and look at the bearing seat on the axle shaft. Make sure it’s not damaged.

How to replace rear axle bearing and seal?

Your source for a start for your DIY automotive repair. Emissions, OBD II codes, Brakes, Filters, and more. If you have a car, I probably have a video about it. ⫷ VW Jetta Brake Pads & Rotor remove and replace. A simple, low cost brake job ⫸ Videos you watch may be added to the TV’s watch history and influence TV recommendations.

How do you install a new rear axle?

You have to open the differential, remove the lock pin and the axle retaining clip, then you have to pull the axle out which may require removing the rear caliper and rotor if you have disc brakes, or the drum if you have drum brakes. Then you can remove the old axle seal. Be sure to inspect the mounting area before you install the new one.

What to do about a leaking rear axle seal?

I would use an Aftermarket brand seal not an OEM replacement.. and make sure you put the OEM suggested weight fluid back in there… if they still wear and leak then it beats the hell outta me!! goodluck! What would rear blocks have to do with a leaking axle seal?? Click to expand… Click to expand… What? That makes no sense at all….

Is the rear wheel seal leaking on a 2002 Silverado?

2002 Silverado 2500HD had a rear wheel seal leaking. This is what is involved with replacing the seal. Should be the same for most trucks with the floating axle. This video contains affiliate links, which means that if you click on one of the product links and buy, I’ll receive a small commission. Loading…

What kind of wheel seal does a Silverado have?

If playback doesn’t begin shortly, try restarting your device. I try to make videos that people find helpful or enjoyable. I take you along while I fix or modify trucks, tractors and everything in between.

What kind of rear end does Chevy 2500 HD have?

We took our high-mileage 2001 Chevy 2500 HD to the pros at RPM Offroad in Bristol, Tennesee. The truck’s rear end was operating like an open diff causing one tire to spin just about any time we got on the throttle hard, especially in turns.

Which is the best aftermarket axle for a truck?

Differentials, gears, axle shafts and even the axle housing itself can prove our undoing at the most inopportune times. In this article we’re going to highlight some of the best aftermarket products available to improve the strength of the 11.5-inch AAM rear axle found in most Dodge and GM 3/4- and 1-ton trucks.

What to do with GM 11.5 AAM rear end?

3. The GM 11.5 AAM axles feature a drain plug that can be used to easily drain the gear oil. For some reason the Dodge versions do not; the diff cover must be removed to drain the oil. 4. While the old gear oil is draining Nelson begins to tear down the axle removing the calipers, rotors, hubs, backing plates and parking brake cables.

Can a GMC Sierra rear axle shaft seal be removed?

Mine was not hard to remove but the old seal did come apart and part of it was still on the truck. Worked great on my 2001 GMC Sierra 2500HD Duramax’s rear axle. Both sides started to leak and this fixed it. You will need a special socket for the spindle nut and be sure to top off on gear oil.

How often do you change rear axle seals?

I have an 05 GMC 2500 duramax. I have changed 2 rear axle seals in the last 4 months. This is not normal, rite ! Where are you getting your seals?? check the wheel bearings they could be bad seals dont go bad that fast by their self. they were after market. The dealer told me they would change bothe side bearings and seals for $800

Why does my Silverado have a floating wheel seal?

I am always doing something different. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later.

Where is the rear main seal on a car?

The major job was reaching the seal. By removing all the additional parts, you are almost done with the process – how to change rear main seal. Generally, the rear main seal is pressed into the hood through bolts into the engine block. Here in the middle, you can see the crankshaft that comes into action when the engine is running.

How to remove pinion seal from Chevy differential?

Pinion Yoke Removal 1 Remove Pinion Nut A fair amount of torque is required for removing the pinion nut. 2 Remove Yoke A few blows with a soft hammer usually gets the yoke free from the splines. 3 Remove Pinion Seal (Special Tool)

What are the symptoms of a rear main seal leak?

The main symptom of a rear main seal leak is when your car starts leaving black stains on your driveway or parking lot. Another sign is aggressive oil loss: you find yourself needing to top-off your oil more frequently, despite the same routes and driving conditions.

What was the rear axle carrier on a 1956 Chevy?

“Make sure your 3.55 rear end is not the original 55-56 rear (306 casting) if you are going to change the ring and pinion. The 57 and later ring gear carrier has a different offset for a thicker ring gear. 55-56 rearend had one carrier for all their different ratios because the had thinner ring gears.

How to shorten rear axles on a 1956 Chevy?

You can shorten your own axles pretty easy. Just use a chop type saw like a power miter saw and use a composite carbon blade ($10.00). Lay it flat and cut away. Not real critical on the cut but it looks nice with a square end. Could do it by hand with a hacksaw if you have the time.

What kind of ring gear does a 57 rear axle have?

The 57 and later ring gear carrier has a different offset for a thicker ring gear. 55-56 rearend had one carrier for all their different ratios because the had thinner ring gears. The aftermrket ring gears are set up to fit 57 and later 899 housing carriers and also the posi housings carriers, 833 and 812.

What to do if your rear axle seal leaks?

I’m replacing the rear passenger oil seal on my 2009 2500. It leaks so bad that it was throwing gear oil in the wheel well. All fasteners are removed however the hub assy. will not come off. Thought I would ask for ideas before using a BFH or slide hammer. I found the same issue today. Right rear axle seal on my 2009 2500 4X4.

What happens if a pinion seal fails on a differential?

As long as the pinion seal is in place and performing well, the differential will stay in good shape and operate as it is supposed to. A failed pinion seal can result in a minor leak where fluid seeps out, or a major leak that can ruin the differential bearings and gears.

What’s the best way to replace a pinion seal?

Step 1: Apply RTV silicone. Apply a thin layer of RTV silicone on the mating surface of the new seal. The mating surface will in most cases have an orange or green sealing surface. Step 2: Install the new pinion seal. Position the seal according to how it needs to be installed against the axle housing.

Can a 2002 Dodge Ram 3500 rear wheel seal ride?

This also means that a new seal size will be required. will this fit a 2002 dodge ram 3500 axle where the rear wheel seal rides? These repair kits are purchased by measurement. Feel free to contact us at 1-800-358-4751 if you have any questions or need assistance. These repair kits are purchased by measurement.

Is there a shaft repair sleeve for a Dodge Ram 3500?

1998 dodge ram 3500 dully dana 80 differencal axle shaft wheel end under seal ? These shaft repair sleeves are listed and sold by measurements. They do not have a listing by vehicle application. Accurately measuring the shaft that has been damaged is important in ordering these sleeves to ensure that it will be a lasting repair.

Is there rear axle seal leak in 1996 SPEEDI?

1996 F350 4×4 Single rear wheel. Rear axle seal leak, please explain the process of measurement for a speedi sleeve. To determine the appropriate sleeve size, it is first necessary to clean the damaged shaft that needs repair.

How to replace rear axle seal on Chevy 2500 HD?