What are the parts of a GMC Sierra 2500?
What are the parts of a GMC Sierra 2500?
Electrical – Like all vehicles, the Sierra 2500 HD has a lot of electrical equipment on board. It consists of parts like the lamps, antenna, seat belts, starter, heated seats and wipers. You will find these parts and all other electrical parts and components here.
How much does a GMC Sierra 2500HD cost?
Includes $450 in cash and discounts. Includes $450 in cash and discounts. Includes $950 in cash and discounts. Includes $950 in cash and discounts. Includes $950 in cash and discounts. Includes $1,450 in cash and discounts.
How can I find a GMC Sierra near me?
No exact matches found For better results, try removing filters, or using the sorting menu. Includes $450 in cash and discounts. Includes $450 in cash and discounts.
What do the symbols mean on a GMC Sierra?
Info symbols indicate there is more information as well as important terms, conditions, or limitations associated with a feature or product. Click on the symbol for details. Dagger symbols indicate there are important terms, conditions, or limitations associated with a feature or product. Click on the symbol for details.
Electrical – Like all vehicles, the Sierra 2500 HD has a lot of electrical equipment on board. It consists of parts like the lamps, antenna, seat belts, starter, heated seats and wipers. You will find these parts and all other electrical parts and components here.
What kind of bolts are on a Silverado brake caliper?
I just did the brakes on my 05′ Silverado, and the caliper bolts were a T55 Torx head bolt. Just a little FYI if you don’t want to reuse those rusty Torx head bolts, go to the auto parts store and buy a new set of bolts.
When to re torque a leaf spring U-bolt?
New U-Bolts Are The Foundation Of Your Leaf Spring Install For Cold-Formed U-Bolts which have been torqued to a set preload are recommended to be re-torqued after a short time to take up the stretch in the set of the material.
What kind of engine does a Sierra 3500HD have?
The 30,990 lbs. rating requires properly equipped Sierra 3500HD Crew Cab Long Box 4WD DRW with available Duramax 6.6L Turbo-Diesel V8 engine. Before you buy a vehicle or use it for trailering, carefully review the trailering section of the Owner’s Manual.
Where was the GMC Sierra 2500HD last serviced?
Purchased on 11/28/18 and owned in FL until 12/01/20. Driven an estimated 37,126 miles/year. Last serviced at 75,382 miles in Cookeville, TN on 04/06/21 • Vehicle serviced. No accident or damage reported to CARFAX. Purchased on 09/24/19 and owned in SC until .
Includes $450 in cash and discounts. Includes $450 in cash and discounts. Includes $950 in cash and discounts. Includes $950 in cash and discounts. Includes $950 in cash and discounts. Includes $1,450 in cash and discounts.
Front Replacement Control Arm Ball Joint Tie Rod and Sway Bar Link Kit – for 2003 GMC Sierra 2500 HD 8.1L 496Cu. In. V8 GAS OHV Naturally Aspirated – SLE Cab & Chassis 4-Door 8.1L 496Cu. In. V8 GAS OHV Naturally Aspirated Loading Reviews… Quality: Premium – High quality new replacement part. Loading Reviews… Loading Reviews…
What kind of trailer does GMC Sierra 3500 have?
We appreciate your interest in GMC and we’ll send the information you requested soon. Requires Sierra 3500 HD Regular Cab Long Bed 2WD DRW with available Duramax 6.6L Turbo-Diesel V8, Max Trailering Package and gooseneck hitch. Before you buy a vehicle or use it for trailering, carefully review the Trailering section of the Owner’s Manual.
Is the GMC Sierra a light duty truck?
The HD version of the Sierra is still considered a light truck (vehicle weight) but characterized as “heavy-duty” because of it’s towing and cargo capacity. The GMC Sierra is available in 1500HD, 2500 HD, and 3500 HD models.
What kind of transmission does a GMC Sierra have?
Earlier versions of the 2500 HD had a five-speed automatic transmission, which was later replaced with a six-speed auto. HD versions of the Sierra are primarily useful for heavy cargo and high performance towing.
Front Replacement Control Arm Ball Joint Tie Rod and Sway Bar Link Kit – for 2003 GMC Sierra 2500 HD 8.1L 496Cu. In. V8 GAS OHV Naturally Aspirated – SLE Cab & Chassis 4-Door 8.1L 496Cu. In. V8 GAS OHV Naturally Aspirated Loading Reviews… Quality: Premium – High quality new replacement part. Loading Reviews… Loading Reviews…
Where to buy parts for a 2003 GMC Sierra?
If you are consulting your 2003 GMC Sierra 2500 HD parts diagram or searching high and low for GMC Sierra HD accessories, you may want to consider an online auto parts retailer like PartsGeek.com.
The HD version of the Sierra is still considered a light truck (vehicle weight) but characterized as “heavy-duty” because of it’s towing and cargo capacity. The GMC Sierra is available in 1500HD, 2500 HD, and 3500 HD models.
Earlier versions of the 2500 HD had a five-speed automatic transmission, which was later replaced with a six-speed auto. HD versions of the Sierra are primarily useful for heavy cargo and high performance towing.
Do you need a PCM for a GM car?
Depending on the year, model and engine of your GM vehicle, your starting system may be less complicated or use only some of the components shown here. For example, earlier anti-theft systems didn’t communicate the same way with the PCM. The bottom line is you MUST get the wiring diagram for your particular vehicle.
What kind of engine does a GMC 3500 have?
Requires properly equipped 3500 Regular Cab DRW Long Box 2WD model with available 6.6L Duramax Turbo Diesel engine and gooseneck hitch. Before you buy a vehicle or use it for trailering, carefully review the trailering section of the Owner’s Manual. The weight of passengers, cargo and options or accessories may reduce the amount you can tow.
Why does my GM car say no start no crank?
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
Depending on the year, model and engine of your GM vehicle, your starting system may be less complicated or use only some of the components shown here. For example, earlier anti-theft systems didn’t communicate the same way with the PCM. The bottom line is you MUST get the wiring diagram for your particular vehicle.
Requires properly equipped 3500 Regular Cab DRW Long Box 2WD model with available 6.6L Duramax Turbo Diesel engine and gooseneck hitch. Before you buy a vehicle or use it for trailering, carefully review the trailering section of the Owner’s Manual. The weight of passengers, cargo and options or accessories may reduce the amount you can tow.
What is a typical GM starting system wiring diagram?
Click on the image here to pull up a PDF of a typical GM starting system wiring diagram. Depending on the year, model and engine of your GM vehicle, your starting system may be less complicated or use only some of the components shown here. For example, earlier anti-theft systems didn’t communicate the same way with the PCM.
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
Can a cab light be installed without the headliner?
Drop the headliner: The cab lights can be installed fairly easily without removing the entire headliner. Loosen the side pillars that are held in by a clip in the top center. Remove the visors and visor clips that are held in with a size **** Torx Bit (looks like a star).
Where is the power junction box on a Chevy Silverado?
Locate the red wire taped between the fender well and the power junction box on the passenger side. Once you find it you’ll need to pull it out and you’ll notice it already has a ring terminal installed. Figure 7. Power wire location. Figure 8.
How many GMC cab roof lights are there?
Only 14 left in stock (more on the way). . Only 5 left in stock – order soon. . . . Only 8 left in stock – order soon. . Only 14 left in stock – order soon.
How to install cab lights on a truck?
In my head it seems simple measure the mounting locations off so they are straight, drop the headliner, drill small holes with a step-bit, route the wiring through the headliner and down the a-pillar and tap into a key-on 12V source. It sounds easy enough. My only questions are, do the lights bolt on or stick on?
