How to change the tension on a serpentine belt?
How to change the tension on a serpentine belt?
Loosen the tension on the tensioner pulley again (rotate the tensioner pulley) and put the belt over the last pulley (top left). 6. Check back to your diagram and make sure the belt is on correctly at each pulley, to make adjustments just loosen tension. 9.
Are there any problems with the V6 Commodore?
An error occurred. Please try again later. (Playback ID: jYdhQDrcPmkjG_Od) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
What’s the best way to change a car belt?
1. Buy the right belt – you can pick these up from supercheap or autobahn for around 30 – $50. make sure you dont just pick one unless you know exactly which suits your car, speak to someone. 2. Draw yourself a diagram of the way your belt loops around the pulleys. 3. Take out a spanner or socket wrench set and locate the tensioner pulley.
How do you replace a tensioner pulley on a Commodore?
1. Remove fan belt by using the 18mm spanner and rotating the pulley assembly anti clock wise. 2. Undo the bolt holding the tensioner pulley on, use the 18mm spanner and turn the bolt clockwise to undo the bolt (the bolt is actually right hand threaded.) 3.
How to remove a fan belt from a tensioner pulley?
Remove fan belt by using the 18mm spanner and rotating the pulley assembly anti clock wise. 2. Undo the bolt holding the tensioner pulley on, use the 18mm spanner and turn the bolt clockwise to undo the bolt (the bolt is actually right hand threaded.) 3.
Where does the tensioner start on a Commodore?
It starts at the bottom on the right hand side of the first page, and continues to the top of second page left hand side. Most important, Disconnect your Battery First, since you have to remove the Alternator to get to it. The Alternator NEEDS to be remove, as there is a bolt that goes through the Tensioner Bracket for the alternator.
Loosen the tension on the tensioner pulley again (rotate the tensioner pulley) and put the belt over the last pulley (top left). 6. Check back to your diagram and make sure the belt is on correctly at each pulley, to make adjustments just loosen tension. 9.
