How do you turn off the fuel light on a 200 Landcruiser?

Re: 200 series question- resetting the fuel filter sensor dash light

Disconnect top wires/plug on filter housing.
Turn Ignition Key on.
Plug top wires/plug back in.
Turn Ignition Key off.
Turn Key back on and start vehicle.

How to reset fuel system warning light on Land Cruiser?

1. Disconnect top wires or plug on filter housing with the ignition OFF 2. Turn the ignition ON 3. Plug top wires or plug back in within 60 seconds 4. Turn ignition OFF 5. Turn ignition back ON and start vehicle The light should now be off.

How to change the fuel filter in a landcruiser?

With the electrical plugs still disconnected, move into the vehicle and turn on the ignition, by pressing the start button twice without your foot on the brake pedal. With the ignition still on, move back to the filter and re-attach the two electrical plugs. The dash light is now reset.

When to change fuel filter on Toyota 200?

dash light reset The dreaded ‘fuel filter warning light’….. Because Toyota don’t specify a regular interval to change the fuel filter on the 200, the first indication it requires replacement is when the warning light appears on the dash, usually after a squirt of high throttle.

How to turn off the fuel system warning light?

Turn ignition back ON and start vehicle The light should now be off. If the light is still on try bleeding the system again then go through above procedure to turn the light off. 1. With the ignition switch OFF, disconnect the fuel filter warning switch connector. 2. Turn the ignition switch from OFF to ON. 3.

Is there a fuel filter warning light on my Landcruiser?

I have a Toyota Landcruiser Gxr V8 2014 and my problem is that even replacing the fuel filter, the light indicator on dashboard appears, I have reset it several times, it disappears and after a short time it appears again. Any idea? Can someone help me? This is the first time i have this.

How to reset the fuel system on a Land Cruiser?

fuel system warning light reset on Land Cruiser model year 2009 1 Disconnect top wires or plug on filter housing with the ignition OFF 2 Turn the ignition ON 3 Plug top wires or plug back in within 60 seconds 4 Turn ignition OFF 5 Turn ignition back ON and start vehicle

How to reset the fuel system warning light?

With the ignition switch OFF, disconnect the fuel filter warning switch connector. 2. Turn the ignition switch from OFF to ON. 3. After more than 3 seconds but less than 60 seconds have elapsed, reconnect the connector. 4. After approximately 3 seconds have elapsed with the fuel filter warning switch closed, the

How do you turn off the fuel light on a 200 Landcruiser?