When to replace fuel pump module on Jeep XJ?
When to replace fuel pump module on Jeep XJ?
Please try again later. Replacing fuel pump module on 1999 Jeep Cherokee XJ. Bosch pump module. Should be same procedure for all 1997+ XJ’s. Used my old FlipHD to record this, as it fits onto of my tripod and I don’t mind getting it dirty, still works well. Loading…
What to do if your Jeep Cherokee stops running?
If the Jeep Cherokee has stopped running or will not start and you feel that the fuel pump has failed, then this is the proper way of diagnosing the problem before replacing an item that may not be needed. Starting from the basics, take off the fuel cap and listen closely for the fuel pump to come on as a helper turns on the ignition key.
Where is the fuel pump connector on a jeep?
Unplug the fuel pump connector at the back of the fuel tank. It will be easy to find and has four wires in the connector. Use a circuit tester and test the harness side for power as your helper turns the key on and off.
What to do when your fuel pump wont turn on?
The computer shuts the power off to the pump if it does not see a signal from the crankshaft sensor. Have the helper turn on the key for 3 seconds and off for 5 seconds and on again a couple of times. If the pump cannot be heard, then replace the cap and lift the hood. Check to see if the fuse to the fuel pump is good.
Please try again later. Replacing fuel pump module on 1999 Jeep Cherokee XJ. Bosch pump module. Should be same procedure for all 1997+ XJ’s. Used my old FlipHD to record this, as it fits onto of my tripod and I don’t mind getting it dirty, still works well. Loading…
Where is the fuel filter located on a Jeep Grand Cherokee?
Jeep Cherokee (1984-2001); Grand Cherokee (1993-2004): nut/bolt sizes may vary, but the removal process is similar. Pull Tip: On later model Cherokee there is no replaceable fuel filter. The fuel filter resides in the pump and is suppose to last the lifetime of the pump.
How to remove a jeep fuel tank sender?
TIP – Those hose clamps are hard to reach so if you want you can just remove the sending unit from here. Use a large flat bladed screwdriver and a hammer to unscrew the retaining ring from the top of the tank. Remove the ring and carefully pull the sending unit and pump out. What’s up, guys. It’s Matt with the YouTube channel BleepinJeep.
If the Jeep Cherokee has stopped running or will not start and you feel that the fuel pump has failed, then this is the proper way of diagnosing the problem before replacing an item that may not be needed. Starting from the basics, take off the fuel cap and listen closely for the fuel pump to come on as a helper turns on the ignition key.
