Common questions

What kind of rear differential does a Chevy 10 bolt have?

What kind of rear differential does a Chevy 10 bolt have?

The rear cover’s shape and the number of bolts are identifying features for GM rear differentials. The round 10-bolt cover with a bulge for the ring gear identifies this axle assembly as an 8.5-inch 10-bolt.

When did GM stop using 10 bolt rearends?

After 1972, General Motors was only installing its 10-bolt rearend in cars, but the 12-bolt remained an option for trucks until 1987. When looking at a 12-bolt rearend, it is important to know that 12-bolt axle assemblies use different components for cars and trucks.

How to rebuild a GM 8.5 rear axle 10 bolt Chevy?

If playback doesn’t begin shortly, try restarting your device. I post great videos of automobile builds, “How-to’s”, Car Show footage, ride-alongs and more!

When did the Chevy 10 and 12 bolt come out?

History and Identification of Chevy 10 and 12 Bolt Chevy Differentials Chevy 10- and 12-bolt axle assemblies have been standard equipment on GM passenger cars, muscle cars, and trucks for decades. The rugged, reliable, and efficient Chevy 12-bolt has established itself as the preeminent rear differential for GM muscle cars since its debut in 1965.

The rear cover’s shape and the number of bolts are identifying features for GM rear differentials. The round 10-bolt cover with a bulge for the ring gear identifies this axle assembly as an 8.5-inch 10-bolt.

If playback doesn’t begin shortly, try restarting your device. I post great videos of automobile builds, “How-to’s”, Car Show footage, ride-alongs and more!

Where can I find the 10 bolt rearend code?

That way, you don’t unknowingly spend money on something you really do not want. While the 10-bolt rearend’s lineage can be identified by the code stamps, which are usually on the passenger’s side axle tube, there are literally hundreds of potential codes for the three different 10-bolt rearend housings.

What happens to the cover on a 10 bolt Chevy?

The outer cover matches; 10 bolts hold the cover onto the housing. This ring-and-pinion gear has suffered catastrophic failure. Be sure the mesh is correct and that the installed parts are correct so you don’t destroy components.

What kind of differential cover do I need for a Chevy truck?

Classic Industries offers Chevrolet Truck Differential Covers. Moser rear end cover for 12 bolt rear ends. Semi Gloss Black to make your rear end look amazing Add a custom look to the underside of your truck with this high quality finned aluminum differential cover.

Which is the best Chevy differential for sale?

With over 30 years of experience providing customers with Chevrolet front and rear differentials for sale, we set the standard in the remanufacturing process. Our goal at National Differential is to ensure that you receive only the highest grade remanufactured Chevrolet differentials available at the best possible price.

What kind of rear axle does a Chevy 3.4 ton have?

A Chevy 3/4 ton pick-up may have a 14 bolt semi-float rear axle or a 14 bolt full-floating axle. All of these axles take different parts so we need to properly identify the axle you have to get you the right part.

What kind of rear axle does a Chevy pick up have?

Not all vehicles are set up the same, even though they may be the same make and model. A Chevy 1/2 ton pick-up may have a Chevy 10 bolt rear axle or a 12 bolt rear axle. Both of these are semi-floating axles. A Chevy 3/4 ton pick-up may have a 14 bolt semi-float rear axle or a 14 bolt full-floating axle.

What kind of differential does a Chevy 9.5 have?

Below is a list of the information and parts that we can supply for your GM 9.5″ 14 Bolt differential applications: Specifications are provided below to assist you in the identification and setup as well as torque spec’s for your Chevy or GM 9.5″ differential.

What kind of rear axle does a 3.4 ton truck have?

Both of these are semi-floating axles. A Chevy 3/4 ton pick-up may have a 14 bolt semi-float rear axle or a 14 bolt full-floating axle. All of these axles take different parts so we need to properly identify the axle you have to get you the right part. Find your AMC/Jeep vehicle in the chart below and click on the illustration for a larger view.

How big is the rear differential on a Chevy Colorado?

We are proud to offer this remanufactured 8.6-inch Rear Differential for the 2005-2007 Chevrolet Colorado with Two-Wheel Drive or Four-Wheel Drive. This rear diff is configured with a 3.08, 3.42, or 3.73 gear ratios depending on the stock…

How big is the pinion shaft on a Chevy 8.5?

The distance between the lower center cover bolt and its adjacent bolts is 3 1/4 inches. Inside, the ring gear bolts are the same as the 8.5 corporate unit. However, the pinion shaft measures 1.438 inches. The axles are retained by a set of C-clips on the inner end of the axle shaft inside the carrier.

Are there any Chevy differentials that are in stock?

Our Chevrolet differentials are in stock and ready to ship. Each of our Chevy differentials is complete and can be installed immediately upon receipt rather than needing additional assembly when you get it, getting you back on the road quicker. National Differential’s Remanufacturing Standards for Chevrolet Differentials.

How much does a Dana K10 front axle cost?

1973-80 K10, K20 FRONT AXLE (DANA DESIGN) ILL. No. Group No. Per Car Qty. Description Price Each Price Ext. 1 6.008 6.008 6.008 376849 458473 14008865 1 1 1 HOUSING ASM-1 973-76 1st Des.

Where are the code stamps on a 10 bolt Chevy?

While the 10-bolt rearend’s lineage can be identified by the code stamps, which are usually on the passenger’s side axle tube, there are literally hundreds of potential codes for the three different 10-bolt rearend housings. Since listing them all within this article is impossible, we’ll be focusing only on visual identification.

That way, you don’t unknowingly spend money on something you really do not want. While the 10-bolt rearend’s lineage can be identified by the code stamps, which are usually on the passenger’s side axle tube, there are literally hundreds of potential codes for the three different 10-bolt rearend housings.

1973-80 K10, K20 FRONT AXLE (DANA DESIGN) ILL. No. Group No. Per Car Qty. Description Price Each Price Ext. 1 6.008 6.008 6.008 376849 458473 14008865 1 1 1 HOUSING ASM-1 973-76 1st Des.

Where are the casting numbers on a Chevy 10 bolt?

The casting numbers for 10-bolt rear differentials are typically located either on the forward side of the passenger-side axle tube or on the driver’s side. These numbers are approximately 3 inches from the center section. The two examples at right show you how to decode 10-bolt housings. 1970 axle code: COZ 01 01 G E

What are the rear end codes for 1973 to 1977?

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies Search Query Display results as :PostsTopics Advanced Search Updated rear end codes page G3GM :: G3 Tech :: Engine & Driveline Page 1of 1

How big is the rear end of a GM 10 bolt?

When it comes to getting power to the pavement, GM’s 10-bolt, 8.5-inch rear end with Positraction is a hero. Like Superman in street clothes, however, it can be hard to identify this beefy unit among its weaker cousins, the 10-bolt, 8.2-inch with open differential.

How are the rear ends of a Chevy named?

Rear ends with measurement designations are named after the diameter of the ring gear, i.e. 7.2 and 8.5 inch. As Chevrolet used many different rear-end models throughout the years, casting codes vary in both location and translation. Information given is for GM-manufactured rear ends.

What kind of rear end does a Currie C-10 have?

Currie ® 9-inch rearends for 1960 thru 1987 Chevy C10 trucks, provide a direct bolt-in solution for those looking to upgrade the rearend of their classic truck car or restomod build.

What kind of differential does a GM C10 have?

The Type-2 differential is typically found in cars that came with smaller-displacement V8 engines, and were not intended to be used in high-performance applications. The ’68 to ’72 C10 is a very popular platform for building a hot rod, and these trucks – like many other pre-1973 trucks came with a trailing arm suspension.

What are the rear end codes for a 1973 Chevy?

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies Search Query Display results as :PostsTopics Advanced Search The most inclusive G3 rear axle information on the internet!

What kind of axle does a 12 bolt Chevy have?

This is the Moser Engineering 12-bolt axle assembly. As you can see, the Chevy 12-bolt differential is one stout axle, and it was the rear axle of choice for GM muscle cars and many GM competition cars.

How big is the pinion on a Chevy 10 bolt?

The pinion diameter is 1.438 inches, and has 25 splines. Like all Chevy 10-bolts, the axles are retained by C-clips on the inner end of the axle shaft inside the carrier. If you find a rearend that uses a large spring perch like this, it is from either an X or F-Body.

What’s the rear end gear ratio in a GMC?

General Motors rear end differentials are referred to by the diameter of the ring gear, i.e. 7.5 inch, 8.5 inch, 10.5 inch. Our experts will help you find the correct ring and pinion set for your particular application.

History and Identification of Chevy 10 and 12 Bolt Chevy Differentials Chevy 10- and 12-bolt axle assemblies have been standard equipment on GM passenger cars, muscle cars, and trucks for decades. The rugged, reliable, and efficient Chevy 12-bolt has established itself as the preeminent rear differential for GM muscle cars since its debut in 1965.

What’s the gear ratio on a 10 bolt Chevy?

The X and F-body spring perches come in two versions: mono-leaf (left) which is shallower than the multi-leaf (right). The 8.5-inch 10-bolt rearend is hugely popular because aftermarket carriers and gears are easily interchangeable. Originally, gear ratios ranged from 2.41 through 4.10.

Author Image
Ruth Doyle