How to reset the oil in a Chevy Silverado?

How to reset the oil in a Chevy Silverado?

Turn the IGNITION ON, Don’t start the ENGINE of CHEVROLET SILVERADO. IMMEDIATELY PRESS the ACCELERATOR PEDAL 3X, Within 5 Seconds. CHANGE ENGINE OIL will flash. The OIL LIFE RESET will display for 15-20 seconds. ENGINE OIL LIFE: 100% will display. That means the OIL LIFE is RESET. Turn Ignition OFF. Oil Reset is now Complete.

How to reset the oil change and service warning?

Typically, 2006 or newer come with the GM Oil Life System. Here’s a general guide to resetting your truck’s oil change and service warning message. Insert the key into the ignition and turn it to the accessory power position. Within five seconds, press on the accelerator and push it to the floor three times.

How to reset your Chevy or GMC oil change light?

Here’s the easy way to reset the oil light on your Chevy or GMC. Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.

How do you reset the oil light on a Honda Accord?

While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.

How do you reset the change oil light on a Chevy?

Reset Oil Change Due Light on Chevy HHR Procedure: 2006-2011. Turn ignition switch to ON position with engine off. Press the INFO and RESET buttons on the DIC at the same time to enter the personalization menu. Press the INFO button to scroll through the menus until you see “Oil-Life Reset”.

How do you turn off the change oil light?

Watch for the change oil light to flash. If it does not flash and remains on, turn the ignition key to the off position and then retry the procedure. After the change oil light flashes, it should go out. If the change oil remains on for five seconds (depending on the year and model Chevy), it may not have reset.

How do you reset oil change indicator?

Hold the button down until the “Oil” icon or word starts to flash, or the indicator lights show some other sign of resetting. Some cars will flash the word “Reset,” or display the numeral “100” to show that 100 percent of oil life remains after the oil change. Turn the ignition off, wait a few moments, and then start the engine.

Do you reset the oil life when you change the oil?

When you change the engine oil, be sure to reset the Oil Life System. The Oil Life display must be reset after each oil change. It will notreset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change.

Where is the oil pan on a Chevy Silverado?

This article applies to the Chevrolet Silverado (2007-present). The Vortec engine has a baffle about 6″ above the bottom of the dipstick tube that prevents the insertion of an oil extractor hose. So we are stuck with the characteristic messiness of oil pan draining.

How many quarts of oil do you need for a Chevy Silverado?

Topping up the last half-quart carefully will prevent over-filling. The Vortec 4.8, 5.3 and 6.0 liter engines should all hold about 6 quarts total. Turn the key to IG2 with the engine off. Use Fuel button (lower left) to scroll to the “Engine Oil Life” display.