Does the starter keep running?
Does the starter keep running?
So, if your starter keep running, the problem could be stuck starter relay contacts, a continuous ground on the starter relay control coil, or a binding ignition lock cylinder that keeps the actually ignition switch in the START position. If the problem persists, it’s not a stuck relay.
Why does my Ford starter keep running even after I Turn Off the engine?
Some Ford owners encounter a situation where the starter run continuously or keeps running even after the engine has started and even after they’ve removed the key from the ignition. At first, this may make you think the starter drive is binding. Or you may think you have a bad starter relay.
What should I do if my Ford F-150 won’t start?
Two days later, after starting it, it continued to try to turn over, even though it started. I checked the connections, all were fine, I took the solenoid back and it checked out fine. I took the starter in and it tested bad, so I bought a new one and put it on. It started right up after putting on the starter.
What to do if you have a bad starter on your truck?
Have one person hammer on the starter body while another turns the key to start in order to free a seized starter motor. This is only a temporary stop gap, and the starter should be replaced as soon as possible. The gear in the nose of a starter is known as a bendix.
What are the symptoms of a bad starter?
Symptoms of a Bad Starter on a Ford Truck 1 Click. When the ignition key is turned to the start position and nothing occurs except a rather loud and heavy-sounding click noise, the starter may be seized up. 2 Motor Without Engine. The gear in the nose of a starter is known as a bendix. 3 Grind Aftershock. 4 Lock Up. …
What should I do if my Ford starter has seized?
While this tends to work more on AC Delco starters, it is worth trying on a Ford starter that has apparently seized. Have one person hammer on the starter body while another turns the key to start in order to free a seized starter motor. This is only a temporary stop gap, and the starter should be replaced as soon as possible.
Two days later, after starting it, it continued to try to turn over, even though it started. I checked the connections, all were fine, I took the solenoid back and it checked out fine. I took the starter in and it tested bad, so I bought a new one and put it on. It started right up after putting on the starter.
How can I tell if my car starter is running?
Next check for ground at the starter relay control. The relay should only get ground from the PCM when the ignition switch is in the START position. If you find ground in the RUN position, check the ignition switch wiring for your year, model/engine the START wire is NOT hot while the switch is in the RUN position.