What are leaf spring clamps for?

What are leaf spring clamps for?

Our leaf spring clamps are a perfect choice when renewing or modifying your truck’s leaf spring suspension. When adding or removing a leaf, our spring clamps allow the springs to be clamped exactly as desired.

Why does spring not break on Ranger truck?

The spring is less likely to break due to not forcing it past is Zero point. This is when the spring is lost all arch in the normal direction to hold the truck up and starts in the negative arch. This is the major factor in spring breakage.

Can a broken leaf spring be salvaged?

Depending on the extent of the wear or damage, you may find yourself needing to replace one leaf, two leaves, one spring or both springs. Add an individual leaf: If one of your leaf springs has a single broken leaf, you can salvage the spring by replacing the leaf.

How big are the springs on a Chevy Ranger?

Lets first clarify that there isn’t a 63-inch Chevy leaf spring. The fullsize Chevy truck (from 1973-1999) came with either 54-Inch, 56-inch or 64-Inch leaf springs. Those that are measuring their springs at 63-Inches aren’t measuring correctly. You have to follow along the springs when you measure.

Can you replace the shackle on a Ford Ranger?

Some guys have used them to replace the Ford Ranger shackle for lift when mounted in the stock configuration. In a shackle flip setup, they would actually make the spring sit higher and reduce ride height, which is what they were designed to do on the Chevy’s. Kartek offers a replacement Shackle Mount for the Ranger.

When to replace leaf brackets on Ford Ranger?

This is a “How To” on replacing the leaf spring brackets on the Ford Rangers. After having my mechanic replace the rusty rear leaf spring brackets and shackles, I took it upon myself to replace the front leaf spring brackets after one had rusted and broke on me.

How much does it cost to replace leaf spring brackets?

First thing of course is to purchase the replacement brackets. I got mine from the for dealer for around $23.00 each. Though they are a cheap part, they can be a pain to install. Now that you bought the brackets you need to go and buy the bolts, washers, and nuts to mount them to the frame of you truck.

How do you replace a leaf spring hanger?

Take the screw out, unplug the bulbs and feed the wires down through the bed. After the wires are dropped down though the bed, you need to pull the wire loom from the bed where they are attached, making sure you get all the plastic push clips out.