Easy lifehacks

How do you fix window glass on a Ford door?

How do you fix window glass on a Ford door?

Raise the regulator and at the same time pull the motor towards the hinge end of the door. 51 Slowly twist the motor in a clockwise direction and at the same time fold the regulator over the top of the motor so that it comes to rest on the lock side of the door (see illustration).

Can a window be replaced on a Ford F-150?

We will show you how to access the gain access, replace the glass, and put it all together in four easy to follow steps. This article applies to the Ford F-150 (2004-2014). If your window is shattered or pretty scratched up you can get hit with a hefty repair bill at a shop.

How to remove a window regulator from a Ford door?

3 Prise off the inner and outer glass weatherstrips. 4 Lower the window so that the regulator connector is level with the door lower aperture. 5 Remove the single screw which retains the glass run extension (accessible through the small aperture at the lower corner of the door) (see illustration).

How to remove a quarter window from a door?

Remove the door quarter window. 25 Detach the window channel from the regulator ball and socket joints then raise and remove the window from the interior side of the door. 26 Refitting of the door glass is the reversal of the removal procedure.

We will show you how to access the gain access, replace the glass, and put it all together in four easy to follow steps. This article applies to the Ford F-150 (2004-2014). If your window is shattered or pretty scratched up you can get hit with a hefty repair bill at a shop.

What to use to replace window glass on Ford truck?

If the glass is tight in the channel, you can use silicone spray to help it slide more freely. Using the window controls, test the movement of the window now before re-installing everything else. This step is pretty straightforward.

What to do if your front door window is shattered?

If your old window is shattered inside the door, you’ll have to remove all the big pieces by hand. Wear very thick gloves when doing this and dispose of it properly. Once all the big pieces are out of the way you’ll need to use your shop vac to vacuum up all the small pieces.

Author Image
Ruth Doyle