Is wheel rubbing bad?
Is wheel rubbing bad?
Usually when using oversized tires or wrong size, offset, or width will cause tire rub. Tire rubbing is dangerous and can cause a tire blow out. Using the correct size wheel and offset also plays a major roll in avoiding tire rub.
Do wheel spacers prevent tire rub?
Spacers allow a larger wheel and tire to be fitted without rubbing by creating clearance to interior wheel well components. Sometimes by moving the wheel and tire assembly outward from the hub, interior clearance is gained, but rubbing can then occur on the vehicle fender and/or wheel well liner.
Will wheel spacers help with rubbing?
Wheel spacers will make the offset even lower and push the wheel even further outside the fender, causing even MORE rubbing. The only things you can do is get smaller tires or a bigger lift.
Where are the body bolts on a Chevy Camaro?
In particular, the body bolts that thread into the cage nuts at the base of the firewall and under the front seats tend to be difficult to remove. If you don’t add penetrating oil before loosening the bolts, the nuts can break the cage and create a lot of extra work.
What to do if your Chevy Camaro front suspension is bent?
A bent control arm can be difficult to recognize without the arm off the car and sitting right next to another good arm on your workbench. If your frame or body is bent enough that an alignment shop had to compensate, you’ve got some serious work ahead of you that should be done by a frame alignment shop.
Where are the cage nuts on a Chevy Camaro?
The rear-most subframe bolts that are threaded into the cage nuts under the front seats can also break loose and cause problems; these cage nuts are much harder to work on because they are located under the seat frame-support panels. If a rear cage nut breaks loose, you have to perform some major surgery to repair it.
When did Chevrolet start making wheels for corvettes?
Even as far back as 1953, Chevrolet manufactured wheels for Corvette models that showcase a sleek style with the ability to travel at impressive speeds. No matter if you are in search of reproduction, style, replica or Grand Sport wheels, Top Flight Automotive aims to bring your Corvette restoration vision to life.
Why are the rims on a corvette staggered?
A staggered fitment means that the rear wheels and tires are slightly wider than the front, providing better traction and a more aggressive stance for the Corvette rims . Additionally, Cray engineers factor in the related concepts of wheel offset and backspace.
Are there any rallye rims for a corvette?
Whether you are heading to the race track or want to restore your classic Corvette to factory condition, no one stocks C2 and C3 rallye rims like Top Flight Automotive. With the help of one of our sales representatives, we can connect you to compatible rallye style wheels for your Corvette.
Why are Cray wheels used on a corvette?
As one moves up the performance curve, from the base Corvette Coupe and convertible to the 427, Z06 and top-of-the-line ZR1, increased performance can be achieved, in part, through the heroic efforts of Corvette engineers to reduce weight. Cray Corvette Wheels are in sync with this weight reduction manifesto.
