How to use forscan to program a new Pat key by?
How to use forscan to program a new Pat key by?
If both access types are available, FORScan asks user to select the preferred one. Coded access can be done fast, but requires incode/outcode calculator. Timed access doesn’t require any code exchange, but requires signfificant timeframe (at least 10 mins).
What does no start no crank no click mean?
If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that. In the old days, power flowed through the ignition switch and down to the starter solenoid. Not anymore.
How to relearn Pats ignition key code program?
Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. Cycle an unprogrammed key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.”
What to do if your Ford key code is b1601?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the B1601 FORD code is 1.0 hour of labor.
How does the Pats work on a b1601 Ford?
Engine Light ON (or Service Engine Soon Warning Light) During each vehicle start sequence, the transceiver reads the Passive Anti-Theft System (PATS) key identification code and circuit send the data to the Powertrain Control Module ( PCM ). Need more information on how to fix the B1601 FORD code? Need more help?
Cycle key 1 to RUN. Select “Ignition Key Code Erase.” Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. Cycle an unprogrammed key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Ignition Key Code Program.”
How much does it cost to repair a b1601 Ford engine?
The cost of diagnosing the B1601 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. Engine Light ON (or Service Engine Soon Warning Light)
