How to replace the low beam bulb on a Chevy Traverse?
How to replace the low beam bulb on a Chevy Traverse?
Here is how to replace the Low Beam Bulb on a 08-14 Chevrolet Traverse with out removing the headlight. This will also work on the GMC Acadia, Buick Enclave & Saturn Outlook. Very Easy as you can see. No Need to remove bumper cover. If this video has helped you please leave a thumbs up and subscribe to my channel. Loading…
What kind of headlight does Chevrolet Traverse use?
Use the fitment form at the top of the page to select your exact year and engine type for your Chevrolet Traverse. The SYLVANIA XtraVision® halogen headlight delivers more downroad visibility using a brighter light bulb with no added glare.
How do you remove a low beam light bulb?
To remove the LOW beams— remove cover– reach in- and press the connector on the sides– it comes right off… you can then turn the old bulb- and pull out. Reverse procedure. (or to put back on you may want to connect plug and then turn into place)…
Here is how to replace the Low Beam Bulb on a 08-14 Chevrolet Traverse with out removing the headlight. This will also work on the GMC Acadia, Buick Enclave & Saturn Outlook. Very Easy as you can see. No Need to remove bumper cover. If this video has helped you please leave a thumbs up and subscribe to my channel. Loading…
How do you replace a burned out headlight?
In case you plan on replacing a burned out headlight- or upgrading— heres how…. There are a total of 4 screws to remove. A simple phillips will do. There are 2- behind the air dam…. Here I have a screwdriver to one… the other is to the left- visible in the pic. Remove these. Then- remove these 2 other screws in the wheel well.
To remove the LOW beams— remove cover– reach in- and press the connector on the sides– it comes right off… you can then turn the old bulb- and pull out. Reverse procedure. (or to put back on you may want to connect plug and then turn into place)…
Can you change the bulbs on a headlamp?
From oil changes, to changing the bulbs, to changing the timing cover “gasket”, etc. They are designed for the professional only to service them, unless you want to spend a lot of time doing what used to be simple repairs.
Where to put a new headlight bulb on a Chevy Traverse?
Push the power plug on to the base of the new H11 low beam bulb and insert it into the headlight housing. Rotate the base of the bulb 1/4 turn clockwise to lock it into place. The round black plastic dust cap for the High Beam bulb is located further in closer to the center of the vehicle.
What do I need to replace headlight bulbs?
Replacement headlight bulbs with their part numbers are as follows: Low Beam # H11, High Beam # 9005, Turn Signal # 4157NA, and Side Marker # 194NA. The only tool needed to access any of the bulbs is a Torx T20 star bit screwdriver.
How can I see the back of my headlamps?
You may find it easier to turn the wheel INWARD so you can have better access…. You will then be able to tug the wheel well cover- giving you access to the area. Using a flashlight- shine in to the area- looking up— you will see the back of the headlamps. the high/low bulbs have a hard plastic screw on cover.
