What kind of nut to use for exhaust flange?

What kind of nut to use for exhaust flange?

Click to expand… When I replaced the exhaust on my FJ that is what I did. Cut the nut off. Then you can use a 3/8 stainless bolt. 3/8 is as close to 10mm as you can get other than a 10mm. Fine thread will likely be best. Hard part is finding stainless all steel lock nuts/crimp nuts.

What’s the best way to remove broken exhaust studs?

Here’s the best way I’ve found to get them out. By the way, it works on most any kind of broken off bolt as long as you have enough sticking out where you can get a grip on it. Also, don’t waste time with vise-grips. Get a good quality set of gripping pliers. You’ll be glad you did. Loading…

How to repair exhaust flange on catalytic converter?

This will save replacing the entire catalytic converter as in this application the end of the pipe is flaired and/or in some applications the flange is spot welded to the end of the pipe. Step 4: Place One Flange Over the Other and Drill Holes As Indicated.

What’s the best way to replace an exhaust bolt?

My general rule for exhaust bolts/nuts is to order new ones with the part you are replacing, knowing full well that there is a good chance you’ll destroy the ones you are removing. Better to be prepared ahead of time than to be stuck waiting for new parts from another country after you’ve disassembled everything.

How to get rid of stuck exhaust manifold bolts?

Learn how to remove stuck exhaust manifold bolts or studs. Wades shows you a little-known trick to help loosen up some of those old, seized and corroded exhaust manifold bolts. This can be a life saver tip and is a very common problem for gas and diesel applications.

What did old mechanic teach me about exhaust manifold bolts?

Old Mechanic Taught Me This Trick To Removing Rusty Exhaust Manifold Bolts! If playback doesn’t begin shortly, try restarting your device. I’m a mobile heavy equipment, diesel, and fleet mechanic. Throughout the week I get to work on lots of different machines.

Why do I have rusted exhaust bolts on my car?

And, the frustration comes in the form of rusted stuck exhaust bolts. This usually happens in the automobiles because of the corrosion and aging of the nuts and bolts. The rusted exhaust bolt never moves or bidges easily and one might have to apply certain methods to do so.

What’s the best way to remove exhaust nuts?

Good luck. this also is a really common problem with the mk2 golf/jetta crowd when removing exhaust manifolds . Using PB blaster is the most successful method combined with alot of patience and luck and elbow grease.