How to install adrenaline high pressure oil pump?
How to install adrenaline high pressure oil pump?
Remove your existing High Pressure Oil Pump – HPOP If you still have your factory fuel bowl/water separator, you will need to remove it in order to install your new Adrenaline HPOP. Loosen the compression nuts on all 4 fuel lines. Remove the rubber drain line off the back of the fuel bowl. Unplug the electrical sensor on the back of the fuel bowl.
What should the pressure be on an adrenaline HPOP?
Injectors require a minimum of 2600 psi high pressure oil to fire correctly. High pressure oil is used to atomize fuel coming from the injector. The larger the injector and nozzle the more the pressure drops on a stock HPOP. 2800-3000 psi is the optimal operating pressure under wide open throttle for correct atomization of the fuel.
Is the adrenaline HPOP upgrade a good upgrade?
The Adrenaline increase flow and withstands pressure loss for much longer than the factory OE pump. The Adrenaline can supply much larger injectors with oil pressure and can support up to 275cc injectors or 550hp. This HPOP upgrade is also a very good OEM replacement without modified injectors.
How to install an adrenaline HPOP in a truck?
Any dirt or lint can cause your IPR to malfunction upon reinstallation. Installation of your new Adrenaline HPOP Follow the removal procedure in reverse order. Place the Adrenaline in your truck with the new mounting gasket that was supplied. Reposition the drive gear and reinstall the bolt, washer and access cover.
What does adrenaline HPOP do for 7.3L PowerStrokes?
The Adrenaline HPOP from DieselSite is designed to cure the dreaded P1211 code that is so common with 7.3L Powerstrokes, as well as just general injector starvation that many do not even realize is occurring on their trucks, literally robbing horsepower, fuel economy, and reliability.
The Adrenaline increase flow and withstands pressure loss for much longer than the factory OE pump. The Adrenaline can supply much larger injectors with oil pressure and can support up to 275cc injectors or 550hp. This HPOP upgrade is also a very good OEM replacement without modified injectors.
Injectors require a minimum of 2600 psi high pressure oil to fire correctly. High pressure oil is used to atomize fuel coming from the injector. The larger the injector and nozzle the more the pressure drops on a stock HPOP. 2800-3000 psi is the optimal operating pressure under wide open throttle for correct atomization of the fuel.
What kind of HPOP does a Ford 7.3L have?
DieselSite Adrenaline HPOP (High Pressure Oil Pump) 94-03 7.3L PowerStroke DS-HPOPs_ADRSI-Main 0.00 DieselSite DS:HPOPs:ADRSI The HPOP in your 7.3L plays a major role in ensuring adequate fuel delivery is made. Upgrade yours with an Adrenaline for unsurpassed performance and longevity.
