How do you change a wheel bearing on a Ford F150?

Step 1 – Remove wheel from truck. Loosen the lug nuts of the wheel you’ll be working on while he truck is on the ground.
Step 2 – Unbolt caliper from brake disc.
Step 4 – Pop off wheel bearing cap.
Step 6 – Unbolt hub from wheel spindle.
Step 5 – Remove wheel hub and bearing.
Step 6 – Install new hardware.

How do you take the hubcaps off a Ford f150?

In reality, hubcaps are simply clipped on your rims. To remove them you will simply have to pry the wheel cover with a flat screwdriver e.g. on the wheel cover to remove it from the rim of your Ford F 150 . Once done you should have the ability to remove it by pulling it to you.

How to replace wheel hub on Ford F-150?

Install new wheel hub to steering knuckle with four 18mm bolts. Reinstall the 13mm wheel bearing center nut and bearing cap. Reinstall brake caliper bracket and brake calipers.

How do you replace wheel bearings on a Ford F-150?

Use an 18mm socket to detatch the four bolts holding the hub to the wheel spindle Figure 8. Figure 9. Remove the wheel bearing and hub by plling it out. use your breaker bar for leverage if it’s stuck. Figure 10. Old wheel bearing Figure 11. New wheel bearing Figure 12. New and old wheel hub

How do you replace the rear differential on a Ford F-150?

Seat the bearing cap on the left side with pressure, and then loosely install the two bearing cap bolts Hand tighten the bearing cap bolts on both sides all the way and then torque to 77 ft-lbs.

Why is my Ford F150 not 4 wheel drive?

If the wheel rotates with the driveshaft and the truck is in 4H you have a problem with the IWE on that wheel. If you are experiencing a problem with a grinding noise coming from the front of your vehicle while accelerating then this section is for you.

Install new wheel hub to steering knuckle with four 18mm bolts. Reinstall the 13mm wheel bearing center nut and bearing cap. Reinstall brake caliper bracket and brake calipers.

How does the transfer case work on a Ford F150?

The transfer case of the Ford F150 essentially replaces the drive shaft output of a 2WD in its placement. It is connected to the end of the transmission and is fitted with two yokes: one for the drive shaft in connection with the front wheels, and the other to the rear wheels.

How does 4 wheel drive work in a Ford F150?

Firstly, you need to know that the 4WD system will drive nearly identically to the 2WD, only with less fuel efficiency. The extra power being diverted to the two additional wheels will take up a bit of the fuel that is normally directed toward a more fuel-efficient drive.

How do you change a wheel bearing on a Ford F150?