What type of lubricant should be used during assembly of a torque converter?

What type of lubricant should be used during assembly of a torque converter?

You should experience two distinct drops of the converter into the transmission before it is all of the way in. At this point, use a light lithium grease (white) or equivalent and grease the torque converter pilot and crankshaft pilot so the converter slides into the crank without binding up.

What kind of grease to use on torque converter?

Using a light lithium grease (white) or equivalent and grease the torque converter pilot and crankshaft pilot so that the torque converter slides without binding.

How to install a torque converter and transmission?

Apply Loctite to converter bolts or nuts, then tighten to 30 ft/lbs. Step 4 Elevate rear wheels 3″ off ground. Install four (4) quarts transmission fluid.

What happens when a torque converter goes bad?

Higherstall speed – When issues in the torque converter worsen, it will take more time for the transmission to engage the engine, leading to irregular engagement and consequently, total failure.This problem can affect transmissions with lock-up converters more severely than it does others.

How much fluid do you put in a torque converter?

For racing applications or vehicles that are used for towing, pour one (1) quart of transmission fluid in converter. Install converter on transmission carefully, supporting the weight of it to avoid damage to the front pump seal. Rotate converter as you push it on.

What should I do before installing a torque converter?

Apply a light film of grease or anti-seize to the torque converter pilot before installing the torque converter and transmission assembly onto the engine.  We recommend replacing the lip seal in the transmission front pump when installing a new torque converter with a previously used transmission. !

Using a light lithium grease (white) or equivalent and grease the torque converter pilot and crankshaft pilot so that the torque converter slides without binding.

Can a lubricant affect a torque reading on a car?

So, torque isn’t the true measure of bolt tightness—it’s tension. But lubrication on the bolt threads—and a whole host of other factors—can cause fluctuation in torque readings. So once you add a lubricant of any kind to the threads, all bets are off as to whether the same torque setting will truly secure the bolt.

How big is the flexplate for a torque converter?

Verify that the torque converter mounting pads sit flush against the flexplate.  When installing 7/16” bolts to attach the torque converter to the flexplate we recommend that you first enlarge the torque converter bolt holes in the flexplate to an inside diameter of 29/64” (.453”).