How do you remove dust cap from brake drum?
How do you remove dust cap from brake drum?
Remove the dust cap with a screwdriver. With the wheel removed, you will be able to see the outside of the brake drum directly behind where the wheel used to be. The center of the circular brake drum is a removable dust cap. Slide a flat head screw driver into the gap beneath the dust cap and pry it toward you to remove it.
How do you remove the brake nut from a car?
Twist the drum as you pull it backward to remove it. With the axle nut removed, the drum will no longer be held in place, but may still be stuck on due to rust or grime. Twist the drum slightly as you remove it to break it free from any rust. The drum may be extremely difficult to remove.
Can you remove springs from rear brake pads?
Some vehicles will have one spring for each brake pad, while others may have two. All of the springs will need to be disconnected to relieve the tension and allow you to remove the pads. You may be able to remove the springs with your fingers, but it could pinch or injure you.
Do you need to remove brake clips before replacing brake pads?
There should be two clips inside the brake system that need to be removed prior to removing the pads themselves. Make sure to set the clips aside someplace safe for reuse when installing the new brake pads. If the clips are damaged, you can often purchase replacement ones at your local auto parts store.
Remove the dust cap with a screwdriver. With the wheel removed, you will be able to see the outside of the brake drum directly behind where the wheel used to be. The center of the circular brake drum is a removable dust cap. Slide a flat head screw driver into the gap beneath the dust cap and pry it toward you to remove it.
How do you remove the drum from a car?
Grab the brake drum by the edges and pull it off. It may help to wiggle it a bit as you pull. It may be necessary to back off the brake adjuster to remove the drum. This is done through the brake adjustment hole in the drum or on the backing plate using a brake adjuster tool to turn the adjuster to loosen the brakes enough to remove the drum.
How do I adjust the drum brake on my car?
To confirm your brakes are in good working order before you adjust them, check your vehicle for symptoms of a bad or failing drum brake. This article covers the adjustment process for drum brakes of the star wheel type. Step 1: Lift the rear end of the vehicle. Make sure the vehicle is in park and that the parking brake is set.
Twist the drum as you pull it backward to remove it. With the axle nut removed, the drum will no longer be held in place, but may still be stuck on due to rust or grime. Twist the drum slightly as you remove it to break it free from any rust. The drum may be extremely difficult to remove.
