How much does it cost to diagnose a p1212 code?

The cost of diagnosing the P1212 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What to do if you get a P1200 code?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P1200 code is 1.0 hour of labor.

What does diagnostic trouble code p1211 Ford mean?

The Powertrain Control Module ( PCM) monitors the Injection Control System Pressure. The Diagnostic Trouble Code (DTC) indicates that Injection Control Pressure (ICP) was not to specification during normal driving conditions. Need more information on how to fix the P1211 FORD code?

How much does it cost to repair a p1211 Ford engine?

Replace oil/fuel as necessary. The cost to diagnose the P1211 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Is the injector control pressure not detected during crank?

Injector Control Pressure Not Detected During Crank is the generic description for the P1212 code, but the manufacturer may have a different description. Currently we have no further information abouth the P1212 OBDII code. Please post your question on our “Questions” section for more information: AutoCodes.com Questions .

What should the ICP reading be on a Ford p1211?

But if the PCM is providing maximum duty cycle and the ICP reports either less than 400psi or 2,000-2,500psi, and the engine is not running, it concludes there is a problem (a reading of 2,000-2,500 is a programmed “default” reading the PCM provides on the scan tool when it believes there’s a fault in the ICP).

What’s the duty cycle for a 3, 000 psi injector?

But it’s up to the IPR to regulate the amount of pressure going to the injectors. The IPR can regulate a 3,000 psi reading with no more than a 12% duty cycle. Yet, the PCM is capable of providing up to a 60% duty cycle to the IPR. However, once it reaches 50%, the PCM sets a trouble code P1211 or P1212 for “ICP above/below normal.

How does the fuel injector control module work?

The fuel injector control module (FICM) tells the injector when and how much fuel to deliver to the engine cylinder. A failing FICM may cause starting issues, misfires, loss of power, and poor fuel economy. It may also trigger your Check Engine light.

What happens if your fuel injector is failing?

A failing FICM may cause starting issues, misfires, loss of power, and poor fuel economy. It may also trigger your Check Engine light. These symptoms may also be related to failing injectors, clogged fuel filters, or a failing fuel pump, so be sure to check the condition of the rest of your fuel system.

What’s the trouble code for a Ford PowerStroke?

However, once it reaches 50%, the PCM sets a trouble code P1211 or P1212 for “ICP above/below normal. If you receive this code, your first step is to check the oil level in the crankcase. Since the entire high pressure system depends on having enough oil in the reservoir, a drop in oil level of 3 or more quarts can bring the system to a quick stop.

How much does it cost to diagnose a p1212 code?