Why is my 12 volt battery not working?
Why is my 12 volt battery not working?
I’m seeing 12 volt power leaving the battery, but NO 12 volt power is at the invertor / convertor inside the camper. This ruled out a bad invertor / convertor and led me to believe we had a cut wire somewhere… However the solution was much easier and cost nothing to fix… with that said check out the video for the solution…
What’s the voltage of a car battery with no power?
ASSUME YOU MEAN WITH NO SHORE POWER AND ENGINE OFF– THAT VOLTAGE IS OK– ABOUT A 40% DISCHARGED BATTERY. The Chassis battery running is 14.35. VERY GOOD– THAT IS WHERE IT SHOULD BE.
Why are the 12 volt lights working on shore power?
With the 12 volt lights working when on shore power means the charger is working. Look for a large fuse between the batteries and the charger 12 volt output feed to the positive coach battery terminal (s). With a meter you should read a voltage at the positive terminals. They will read very low if no charging voltage is present.
What’s the battery voltage on a motorhome with no power?
The batteries not running are all 12.58. ASSUME YOU MEAN WITH NO SHORE POWER AND ENGINE OFF– THAT VOLTAGE IS OK– ABOUT A 40% DISCHARGED BATTERY. The Chassis battery running is 14.35. VERY GOOD– THAT IS WHERE IT SHOULD BE.
What to do if your 12 volt battery is not charging?
With the shore cord plugged in take a VDC reading at the battery to see if it is charging. It should be about 13.6 VDC or so. Unplug the power source and then take a reading at the outgoing leads from the fuses for your circuits. If you don’t have any power there then the converter is bad and needs to be replaced.
Can a 12 volt power converter run without a battery?
Lastly, check the batteries a properly working converter should run the entire 12 volt system even without a battery (though it’s not recommended due to the tendency of converters to let transient AC voltage through, the battery acts like a “filter”).
What should the voltage be on a 12 volt battery?
It should be about 13.6 VDC or so. Unplug the power source and then take a reading at the outgoing leads from the fuses for your circuits. If you don’t have any power there then the converter is bad and needs to be replaced. Get back to me and I can make a recommendation.
How many VDC does a 12 volt converter need?
It should be about 13.6 VDC or so. Unplug the power source and then take a reading at the outgoing leads from the fuses for your circuits. If you don’t have any power there then the converter is bad and needs to be replaced. Get back to me and I can make a recommendation. R.J. Are you referring to the fuse near the battery?
