What does code 558 mean?
What does code 558 mean?
The PCM only grounds that wire with a warm engine that is not at idle or WOT. DTC 558 indicates a failure in the EGR Vacuum Regulator (EVR) solenoid circuit.
What does lockout mean on Lifesafer?
The LOCKOUT light is glowing red on my device. If the LOCKOUT light is displayed, your vehicle will temporarily not operate because of too many fails or aborts. This temporary lockout will last for 2-5 minutes. When the message is cleared from your device you will be able to retest.
What is the EGR code on a Ford F150?
There are three main parts of the F150’s EGR system. They are the EGR Valve, Differential Pressure Sensor, and the Actuator Solenoid. P0401 is a general code, which means that regardless of the year (1996+ anyway) and the model, it’ll have the same meaning regardless of which manufacturer built the vehicle (Ford F150 or not).
When to test the Ford EGR valve solenoid?
The following are the most common symptoms that a Ford (or Mercury or Lincoln) car or truck will usually experience when there’s a fault in the EGR System: Car or truck runs fine, but the check engine light (CEL) is on with an EGR Valve Fault Code: P0401 EGR System Flow Insufficient. P01406 EGR Valve Pintle Position.
What causes a failure code on an EGR system?
Another common problem causing failure codes in this system is that the tip of the valve will become irregular shaped from carbon deposits. When this happens it no longer creates a perfect seal. This can allow exhaust gas to continue to flow when not called for by the computer. An example would be at engine idle or when the vehicle is cold.
Why is my Ford F150 p0401 not starting?
Check the tube and see if it is cracked, clogged or otherwise damaged. EGR Valve Itself is Bad– The EGR valve itself is usually not going to be the place to start. But, they certainly are the cause of P0401 often enough. Vacuum Issues– The EGR valve relies on engine vacuum to operate.
There are three main parts of the F150’s EGR system. They are the EGR Valve, Differential Pressure Sensor, and the Actuator Solenoid. P0401 is a general code, which means that regardless of the year (1996+ anyway) and the model, it’ll have the same meaning regardless of which manufacturer built the vehicle (Ford F150 or not).
What are the symptoms of a bad EGR valve?
Common Symptoms Of A BAD EGR Valve. The following are the most common symptoms that a Ford (or Mercury or Lincoln) car or truck will usually experience when there’s a fault in the EGR System: Car or truck runs fine, but the check engine light (CEL) is on with an EGR Valve Fault Code: P0401 EGR System Flow Insufficient.
The following are the most common symptoms that a Ford (or Mercury or Lincoln) car or truck will usually experience when there’s a fault in the EGR System: Car or truck runs fine, but the check engine light (CEL) is on with an EGR Valve Fault Code: P0401 EGR System Flow Insufficient. P01406 EGR Valve Pintle Position.
Another common problem causing failure codes in this system is that the tip of the valve will become irregular shaped from carbon deposits. When this happens it no longer creates a perfect seal. This can allow exhaust gas to continue to flow when not called for by the computer. An example would be at engine idle or when the vehicle is cold.
