What is an orifice filter?
What is an orifice filter?
The orifice tube is a tube with a given length and cross-section which expands the refrigerant but, unlike the expansion valve, it is unable to regulate flow rate and superheating. The orifice tube is always associated with an accumulator at the evaporator outlet.
Where is the filter on a clogged orifice tube?
Clogged Orifice Tube. A fixed orifice tube contains a small brass tube of a fixed diameter encased in a plastic case. The case contains a debris catching filter at each end. It’s located between the condenser and the evaporator core.
What causes an orifice tube to fail in an AC system?
Most orifice tubes fail due to contamination in the AC system due to sealer, oil degradation or mechanical deterioration. Replacing a plugged orifice tube without solving the root problem will result in another plugged orifice tube.
How do you remove the orifice tube in an evaporator?
Remove the orifice tube using needle nose pliers or removal tool. Note the orientation of the orifice tube. It must go back in the same way. Lubricate the O-rings on the new orifice tube with AC oil. Insert the new orifice tube into the evaporator or LLOT or SLOT.
Where is the orifice tube located in an auto?
The orifice tube may be located: In the inlet tube to the evaporator. Built into the high pressure liquid line. Inserted into the high pressure line near the condenser. The 5 different types of Auto AC orifice and expansion valves.
Most orifice tubes fail due to contamination in the AC system due to sealer, oil degradation or mechanical deterioration. Replacing a plugged orifice tube without solving the root problem will result in another plugged orifice tube.
Clogged Orifice Tube. A fixed orifice tube contains a small brass tube of a fixed diameter encased in a plastic case. The case contains a debris catching filter at each end. It’s located between the condenser and the evaporator core.
Remove the orifice tube using needle nose pliers or removal tool. Note the orientation of the orifice tube. It must go back in the same way. Lubricate the O-rings on the new orifice tube with AC oil. Insert the new orifice tube into the evaporator or LLOT or SLOT.
How do you replace the orifice tube in a car?
Replacing the orifice tube requires you to completely evacuate the AC system and disconnect the high pressure liquid line. It’s not a fun job. • Replacement orifice of the exact same color and part number as the old unit Buy or rent a refrigerant recovery machine. Attach the manifold gauge set to the high and low side ports on your car’s AC system
