Why do I need a transfer case on my k1500?

Why do I need a transfer case on my k1500?

The transfer case is used to provide a means of power flow to the front axle. The transfer case also provides a means of disconnecting the front axle, providing better fuel economy and quieter operation when the vehicle is driven on roads where four wheel drive is not required.

Why does my k1500 4 wheel drive not work?

Chevrolet K1500 4×4: 4wd does not work, no 4wd indicator light…. This is useful when difficult off road conditions are encountered. OPERATION When the Ignition Switch is in RUN and the four-wheel drive control lever is engaged, the transfer case switch closes and battery voltage is supplied across the front axle actuator.

Where are the 4WD connectors on a Chevy k1500?

Both have lt blue wires, neither have 12v when in 4wd. There are no 3 wire connectors on my transfer case. There is 1 2-wire connector ontop of the transfer case with a lt blue and a black wires. There is also a 2 wire connector @ the rear of the transfer case with yellow/purple wires.

How do you extend the actuator on a Chevy k1500?

To make the actuator extend you need 12 volts to pin #2 (ON THE ACTUATOR), a ground to pin #1 (ON THE ACTUATOR), and pin #3 to ground (this is where the switch comes in). To make it retract pin #3 neeeds to be ungrounded.

What kind of transfer case does Gm K 1500 have?

We looked at two GM K 1500 trucks that have the NVG 246 two-speed transfer case. One is a 1999 model, the other a 2000. Both use the same controls and happen to have stored the same DTC.

Is the GMT400 transfer case compatible with solid axles?

High pinion, same driver’s side drop differential as the GMT400 transfer case, they use kingpin knuckles that can easily accept crossover steering. ’92-97 F350 axles fit our solid axle conversion as well, they share the same 36.5″ spring pad width as the ’85-91 axles.

Can a GM front axle be converted to 4WD?

If you’re using a GM or Dodge front axle, you’ll need to change the transfer case to one that sets the driveshaft on the passenger side. The transmission does need to be the 4WD version so 2WD transmissions will need to be converted.

Can a solid axle be used on an 88-98 Chevy?

Our solid axle conversion kit allows you to remove the stock independent front suspension from your ’88-98 Chevy and replace it with a solid axle. Choose an Option…