How do you remove the heater on a Thunderbird?
How do you remove the heater on a Thunderbird?
With these items removed insert the small end of the bezel tool (photo #4) over the shaft and engage the bezel nut, turn counter-clockwise to remove. The cable assembly can then be removed by pushing the shaft housing forward and out from under the dash. The heater on/off switch is removed in the same manner.
How do you remove the radio from the dash?
Push the radio forward; drop the end down, and rotate the radio assembly to remove it from under the dash. The heater control is held in place from the back side of the dash by two retainers, one on each side, as shown in photo #6.
How do you remove a headlight control switch?
We’ll start the removal procedures with the headlight control switch. The first step is to remove the Headlight knob and shaft from the headlight switch unit. Removing the knob and shaft will provide access to the headlight retaining bezel.
What’s the best way to replace a heater control valve?
Step 13: Refill the cooling system. Use a 50/50 mixture of antifreeze and distilled or demineralized water to refill the cooling system. Step 14: Bleed all the air out. To get all the air out of the cooling system, you will need to start the vehicle, turn the heater on high, and allow the vehicle to achieve normal operating temperature.
With these items removed insert the small end of the bezel tool (photo #4) over the shaft and engage the bezel nut, turn counter-clockwise to remove. The cable assembly can then be removed by pushing the shaft housing forward and out from under the dash. The heater on/off switch is removed in the same manner.
Push the radio forward; drop the end down, and rotate the radio assembly to remove it from under the dash. The heater control is held in place from the back side of the dash by two retainers, one on each side, as shown in photo #6.
We’ll start the removal procedures with the headlight control switch. The first step is to remove the Headlight knob and shaft from the headlight switch unit. Removing the knob and shaft will provide access to the headlight retaining bezel.
How do you remove ignition switch from Thunderbird?
The bezel removal tool has two different size ends. The larger end is for removing the ignition switch bezel; the small end removes the headlamp switch, wiper controls and heater switch. The following procedures require going under the dash. Before starting disconnect the battery. Be sure to record the wire color codes and locations.
