Does the cooling fan affect the AC?
Does the cooling fan affect the AC?
Yes, a broken radiator fan can cause the air conditiong to stop working. The AC system depends upon being able to dissipate heat into the engine coolant. You really need to have the fan replaced, or at least, have a diagnostic check to see what is causing the fan to stop working.
Why is my a / C fan not running when the AC is turned on?
Many people confuse pressure in the system for the system being full. Volume and pressure are two different properties of a gas, which the refrigerant in your A/C system is a gas when it is allowed to escape to the atmosphere. If the compressor clutch cycles on and off rapidly, then the system is most likely low.
How does a radiator fan work when the AC is on?
The electric radiator cooling fan assembly is controlled by a thermoswitch located in the side of the radiator. At higher coolant temperatures, the switch closes to start the cooling fans. Any time the coolant temperature rises to higher than normal levels, the fan will start and continue to run until coolant temperature returns to a normal range.
What happens if you have a bad cooling fan relay?
The check engine light illuminating may indicate a faulty cooling fan relay. A faulty cooling fan relay can also negatively affect air conditioning (A/C) performance. The reason being, on most vehicles, is that the cooling fan doubles as a condenser fan.
Why are my coolant fans not turning on?
If both fans operate then it is time to take a look at the pressure transducer. Don’t let this strange name fool you, it is simply a sensor that relays the amount of pressure in the system to the PCM and the PCM decides when to turn on the fans and or compressor clutch.
Why does the radiator fan not come on when the AC is on?
In order for the AC Condensor to do its job it must stay as cool as it can. As for the engine coolant temp sensor, if the coolant is not hot enough to make the fan come on, then there is no need for the fan yet and there is no problem.
When to turn on the cooling fan relay?
The cooling fan relay is an electromagnetic switch that controls the power supply to the engine’s cooling fans. It ensures that the energy-intensive devices only run when needed, usually when the vehicle is immobile. When the engine temperature approaches unsafe levels, the vehicle’s computer or temperature switch turns on the cooling fan relay.
Why is my a / C not running when the AC is turned on?
Volume and pressure are two different properties of a gas, which the refrigerant in your A/C system is a gas when it is allowed to escape to the atmosphere. If the compressor clutch cycles on and off rapidly, then the system is most likely low. The best remedy for this is getting your A/C serviced.
Why does my PCM not turn on the fans?
You are looking to see if the PCM sends power to one or both relays to turn on the coolant fans. This should happen as the high side of the system approaches 214 psi. If it exceeds this amount of pressure and the system doesn’t turn on, one of the sensors in the system that the PCM uses to know when to turn the system on and off has failed.
